If you get an error code while downloading and installing Windows updates, the Update Troubleshooter can help resolve the problem.
Select Start > Settings > System > Troubleshoot > Other troubleshooters. Next, under Most frequent, select Windows Update > Run.
When the troubleshooter is finished running, it’s a good idea to restart your device.
Next, check for new updates. Select Start > Settings > Windows Update > Check for updates and then install any available updates.
If the problems aren’t all resolved, try running the troubleshooter again to check for additional errors, or see Fix Windows Update errors and follow the troubleshooting steps.
For more Windows Update troubleshooting info, see Troubleshoot problems updating Windows.
Check for Windows updates
If you get an error code while downloading and installing Windows updates, the Update Troubleshooter can help resolve the problem.
Select Start > Settings > Update & Security > Troubleshoot > Additional troubleshooters. Next, under Get up and running, select Windows Update > Run the troubleshooter.
When the troubleshooter is finished running, it’s a good idea to restart your device.
Next, check for new updates. Select Start > Settings > Update & Security > Windows Update > Check for updates and then install any available updates.
If the problems aren’t all resolved, try running the troubleshooter again to check for additional errors, or see Fix Windows Update errors and follow the troubleshooting steps.
For more Windows Update troubleshooting info, see Troubleshoot problems updating Windows.
Check for Windows updates
If you’re experiencing issues with Windows Update in Windows 10/11, you can use the built-in Windows Update Troubleshooter to automatically resolve them. However, sometimes the troubleshooter itself may not work, leaving you in need of other solutions to fix the errors. In this article, we’ll discuss some common issues with the Windows Update Troubleshooter and offer several ways to fix them.
See also: Troubleshooting has been disabled by Group Policy Windows 11
Common issues with the Windows Update Troubleshooter
The Windows Update Troubleshooter can encounter various issues, such as getting stuck at initializing the diagnostic, being stuck on resolving problems, being stuck on starting BITS service, or simply not working at all. Sometimes, it may also show an error message stating that the Windows 10/11 service registration is missing or corrupted.
When running the troubleshooter, it will suggest fixes that you can apply to resolve the issues it finds. However, some errors may be identified but not fixed by the Windows Update Troubleshooter, such as the 0x803c0103 and 0x80244022 Windows Update errors. In these cases, you may need to use repair tools such as DISM and SFC.
It’s worth noting that these issues can occur in various versions of Windows, including Windows 11 or Windows 10 Pro or Home edition, and Windows Server 2016 or 2012.
How to fix Windows Update Troubleshooter not working
Here are several ways to fix the Windows Update Troubleshooter if you’re experiencing issues with it in Windows 11 or Windows 10.
Download the Windows Update Troubleshooter
If the built-in Windows Update Troubleshooter isn’t working to resolve your issue or won’t even start, you can try downloading and using the Windows 10/11 Update Troubleshooter from Microsoft’s website.
- Download the Windows Update Troubleshooter for Windows 11/10 from here.
- Open the downloaded wudiag file with “Diagnostics Troubleshooting Wizard.” By default, all .diagcab files will run on “Diagnostics Troubleshooting Wizard.”
- In the “Windows Update Troubleshooting” window, click on the “Advanced” link.
- Make sure the “Apply repairs automatically” option is checked and enabled.
- Then, click on “Run as administrator” to allow the troubleshooter to run with admin privileges.
- In the troubleshooter, select “Windows Update.” Then, click “Next.”
- The Windows Update troubleshooter should start detecting problems and will return possible solutions if an error is found.
Download the latest servicing stack update (SSU)
If both the local and downloaded “Windows 10/11 Update Troubleshooter” do not work to fix your Windows Update issue, you can try to force-install the latest Servicing Stack Update (SSU). This is a common fix for when Windows Update couldn’t retrieve any updates or is always stuck at the “check for updates” status.
These issues could be due to corrupted updates in the past or missing system files, which cause Windows Update to lose track of what updates your PC needs. By installing the latest SSU, Windows Update will be able to recognize the version of the latest SSU so that it knows what updates your PC needs.
To download the most recent Servicing Stack Update, follow these steps:
- Go to the Microsoft Update Catalog.
- In the search box, type “Servicing Stack Update” or the name of the update (KB#) and select the version that matches your operating system (e.g., Windows 10 or Windows 11, and 64-bit or 32-bit).
- Click on the “Download” button next to the update to start the download.
- Once the download is complete, double-click on the downloaded file to run it.
- Follow the on-screen instructions to install the latest SSU.
After installing the latest SSU, restart your computer and retry Windows Update again.
Run DISM and SFC to fix Windows Update Troubleshooter errors
“Deployment Imaging and Servicing Management (DISM)” is a built-in Windows 10/11 repair tool that can automatically update files and correct servicing problems, including Windows Update problems for your Windows 10/11 image. Running DISM can help resolve issues that the “Windows 10/11 Update Troubleshooter” couldn’t fix, such as the “0x803c0103” and “0x80244022” Windows Update errors.
The “System File Checker (SFC)” is another built-in repair tool that can automatically scan for and repair corrupted and missing system files on your Windows 10/11 PC.
To run these repair tools, go to the Start menu and type CMD. From the search result, right-click “Command Prompt” and select “Run as administrator.” In the command prompt, enter the following commands followed by an Enter key after each line of command:
Dism /Online /Cleanup-Image /RestoreHealth
sfc /scannow
The scans may take some time to complete. Enter the second command only after the first scanning is completed. When the repairs are completed, reboot your computer and try to run Windows Update again.
Besides these repair tools, you may want to run a full virus and malware scan using your antivirus software or Windows Defender. Malware or a virus could also be the cause of why your Windows Update couldn’t run or why the “Windows Update Troubleshooter” isn’t working in Windows 10/11. Run a full system scan to check for possible threats and remove them, then retry Windows Update again.
Run update using Windows 10/11 Media Creation Tool
If the Windows Update Troubleshooter fails to fix your problem, and you still can’t update your Windows 10/11, the last resolution would be to run an update using the Windows 10/11 Media Creation Tool. This tool allows you to create installation media, such as a USB drive or DVD, to install or upgrade to Windows 10/11. It can also be used to do an in-place upgrade of your current Windows installation, which may help fix update-related issues.
To use the “Media Creation Tool” to upgrade your Windows operating system, follow these steps:
- Go to the here for Windows 10, or go to the here for Windows 11.
- Click on the “Download tool now” button to download the “Windows 10/11 Media Creation Tool.”
- Once the download is complete, open the tool and select the “Upgrade This PC Now” option.
- Click on the “Next” button to proceed.
- Select the option to “Keep Personal Files and Apps” and click on the “Install” button to begin the installation of the latest updates for Windows 10/11.
- Follow the on-screen instructions to complete the installation process.
- Wait for the installation to complete, and then restart your computer.
After the restart, your Windows operating system should be up-to-date with the latest updates and fixes. This process can take some time depending on your internet speed and the complexity of the updates being installed. Therefore, it is recommended to perform this process when you have enough time and a stable internet connection.
Are you having trouble installing the latest Windows updates? If so, you’re not alone. Many people have been reporting problems with the update process lately. Thankfully, there’s a troubleshooter tool that can help. This blog post will show you how to download Windows Update Troubleshooter on Windows 11/10. We’ll also give you some tips for avoiding common Windows update issues. Keep reading to learn more!
Windows Update Troubleshooter is a program that automatically detects and fixes common problems with Windows Update. Windows Update is a Microsoft service that delivers security patches and updates to Windows users.
However, sometimes Windows Update can run into problems, such as Windows 10 installation has failed, you can’t install Windows 10, Windows 10 keeps crashing or freezing, etc. The Windows Update Troubleshooter can help to fix these problems, restoring the update process to its normal functioning state.
How to Download Windows Update Troubleshooter for Windows 11/10
Windows Update Troubleshooter is a utility that can help you resolve Windows Update issues. It’s a built-in tool. You don’t need to download it from Microsoft. All you need to do is to follow the steps below to run Windows Update Troubleshooter on Windows 11/10.
How to Run Windows Update Troubleshooter on Windows 11
If you are a Windows 11 user, follow the steps below to run Windows Update Troubleshooter to resolve errors while downloading and installing Windows updates.
Step 1. Go to «Start > Settings > Update & Security».
Step 2. Select «Troubleshoot» and choose «Additional troubleshooters».
Step 3. Under the Get up and running section, select «Windows Update > Run the troubleshooter».
Then, Windows 11 Update Troubleshooter will automatically detect Windows 11 update issues and repair Windows 11 errors. When the troubleshooter is finished running, close the window and restart your PC.
How to Run Windows Update Troubleshooter on Windows 10
There’s a little bit different if you are a Windows 10 user. To run Windows Update Troubleshooter on Windows 10, follow the steps below.
Step 1. Select «Start > Settings > Windows Update».
Step 2. Go to «Troubleshoot > Additional troubleshooters».
Step 3. Then, select «Windows Update > Run the troubleshooter» under Get up and running.
Step 4. Windows Update Troubleshooter will detect the update problems automatically. Wait patiently during the process.
If the problems aren’t resolved, repeat the steps to rerun the troubleshooter. Or, turn to Windows repair service to resolve your issues.
Consult with EaseUS data recovery experts for one-on-one manual recovery service. We could offer the following services after a FREE diagnosis
- Repair corrupted RAID structure, unbootable Windows OS, and corrupted virtual disk file
- Recover/repair lost partition and re-partitioned drive
- Unformat the hard drive and repair the raw drive(Bitlocker encrypted drive)
- Fix disks that become GPT-protected partitions
How to Troubleshoot Windows Update Errors Without Losing Data
Microsoft Windows releases updates regularly to improve the security and performance of the operating system. However, sometimes these updates can fail, causing errors that prevent the computer from starting correctly. Fortunately, there are some steps you can take to troubleshoot these errors without losing any data.
First, try Windows Update Troubleshooter to run the Windows fix. Then, run data recovery software to restore lost data after the Windows 11/10 update. EaseUS Data Recovery Wizard is a powerful data recovery software that can help you recover lost or deleted files from your computer.
- It supports a wide range of file types, including photos, documents, emails, and more.
- The software has an intuitive interface that makes it easy to use, even for beginners.
- It can recover data from all kinds of storage devices, including hard drives, SSDs, USB drives, memory cards, and more.
Even if you have accidentally updated to Windows 11/10 and lost some data in the process, EaseUS Data Recovery Wizard can still help you recover it. Follow the steps to get back lost data after the update.
Note: To guarantee a high data recovery chance, install EaseUS data recovery software on another disk instead of the original disk where you lost files.
Step 1. Launch EaseUS Data Recovery Wizard on your Windows 11, Windows 10, Windows 8, or Windows 7 computer. Select the disk partition or storage location where you lost data and click «Scan».
Step 2. This recovery software will start scanning the disk to find all lost and deleted files. When the scan process completes, click «Filter» > «Type» to specify lost file types.
Step 3. Preview and restore lost Windows files. You can double-click to preview the scanned files. Then, select the target data and click the «Recover» button to save them to another safe spot in the PC or an external storage device.
Conclusion
Windows Update Troubleshooter is a built-in tool for Microsoft that can help users fix common Windows update errors without losing data. The process is simple and does not require any additional software. Users can download the troubleshooter, run it on their computer, and follow the instructions. If you are experiencing data loss problems after the update, we recommend downloading and running EaseUS hard drive recovery software.
Windows Update Troubleshooter Download FAQs
Now that you know what the Windows Update Troubleshooter is and how to run it on your computer, you can fix any Windows update issues without losing data. If you still have problems, keep reading.
1. How to fix Windows won’t update without sending errors?
To fix Windows won’t update errors:
- Restart to apply installed updates
- Run the Windows update again
- Disconnect all peripherals
- Check internet connection
- Run a thorough virus scan…
2. How do I force update Windows 10?
Here are the steps to force Windows 10 update:
Step 1. Type cmd in the search box
Step 2. Then type the following commands
- wuinstall /search
- wuinstall /download
- uninstall /install
Step 3. Wait for the finish of update installation.
3. How do I repair corrupted Windows 10?
6 Ways to Repair Windows 10 for Free
- Repair with Startup Repair
- Repair Windows 10 Using SFC
- Repair Windows 10 with Repair Service
- Repair Windows 10 by Resetting PC
- Repair with System Restore
- Reinstall Windows 10 to Repair
Both Windows 10 and Windows 11 are great in different sections. From interface to performance, stability, and innovations, Windows are great. Despite these, one of the worst things about any Windows OS is those annoying updates.
On any Windows OS, time by time you will find tons of updates that need to download and install. While some of these updates provide new features or fixed security patches; major updates bring new features and give a touch to the interface.
Without installing those updates, you will experience annoying popups and soon performance issues. While downloading and installing the updates are quite easy and can be performed within Windows Settings.
Still, there are moments when you can’t install any update on your Windows. You will experience errors while installing those updates. For such occasions, you will need to use the Windows Update troubleshooter on your Windows.
And that’s what we are going to do here. We will use the link given to download Windows Update Troubleshooter for Windows 10 and Windows 11.
Windows Update troubleshooter is provided by Microsoft to fix issues related to Windows Update.
The utility will analyze all the errors on your Window and fix them. Not only Windows Updates but the utility can be also used to repair corrupt system files.
Not only corrupt system files but also DLL and BITS DLL files can be fixed with this too.
Users will notice something like “Windows Update Troubleshooter stuck at initializing the diagnostic” while updating their Windows and we will fix it with Windows Update Troubleshooter.
If you are unable to download Windows Update from Settings then you are recommended to Download Windows Update Assistant for Windows 10 and Windows 11. This will help you to download Windows Updates files.
The link given will provide the setup file to download Windows Update Troubleshooter for Windows 10 and Windows 11. You are going to download and run the utility directly. There won’t be any additional steps or long processes to perform.
File: Windows7-USB-DVD-Download-Tool-Installer-en-US.exe
Developer: Microsoft
License: Freeware
Size: 2.5 MB
Category: Utility
NOTE: some might mix up the Update troubleshooter with File and Folder Troubleshooter (Automatically diagnose and repair Windows file and folder problems). These two are totally different utilities provided by Microsoft. While the Update troubleshooter is for fixing errors related to Windows Updates, the File and Folder troubleshooter will repair any system files or folders that are either missing or corrupt.
For downloading Windows Update files, you can also use Servicing Stack Update. And here is How to Download Servicing Stack Update for Windows.
If you want to upgrade your system instead of using the Media Creation Tool, you can use Windows Installation Assistant to upgrade your Windows.
Compatibility
The utility can be used on almost all Windows OS. You can use it on Windows 10 and Windows 11. Not only the newer versions of Windows but earlier versions like Windows 7, Windows 8, and Windows 8.1 also support the utility.
Download it and run it. However; for running the Update troubleshooter, you will need administrator privileges. Right-click on the downloaded file and select the Run as administrator option.
Windows Update Troubleshooter: Fix Windows Update Errors
On running the utility, it will scan and check for errors in the Software Distribution folder and Windows Updates Services. Once found then it will either replace or fix the corrupt files.
How to run Windows Update Troubleshooter on Windows 11?
Users who have downloaded it manually they will double-click on the setup file and the app will run. Those who have not downloaded can use the built-in option.
However; you will need to understand that a built-in troubleshooter won’t work as good as this one.
NOTE: running the troubleshooter, the process will take up to 2 hours.
- Go to the Start menu and select Settings.
- Now you will select System and find Troubleshoot.
- Inside the Troubleshoot, you will find Other troubleshooter.
- Scroll down and find Windows Update troubleshooter. Right beside, you will also find a Run button, click on it and the troubleshooting process will begin.
Once the troubleshooting got completed then you will reboot your system.
Windows Update Troubleshooter Windows 10
for using the built-in troubleshooter inside Windows 10, you will navigate through Settings > Updates and security > Troubleshoot. Here you will find a Run option, click on it, and troubleshooting will begin.
How to fix Windows Update Crashes?
If your Windows Update is crashing, then you have either corrupt files or your system file is infected. To check system files, you can download the Windows Update troubleshooter. If there is no issue with the system file, then you will need help from a third-party application. Install an antivirus or anti-malware to detect and remove threats.
Why should I download Windows Update Troubleshooter for Windows 10?
If you are experiencing any type of issues that won’t let you download update files, then this can help you. It will fix all the issue that is blocking your system from downloading or installing new Windows Update files.
Those who can’t download any Windows updates can use third-party applications by Microsoft.
There is also the option to download all the updates manually.
What if the troubleshooter didn’t work? What to do?
What if you have downloaded and installed the troubleshooter and still can fix the error? Well for such occasions, instead of using the app, you are going to use CMD.
Use the commands on CMD with administrator privileges and you will fix the error.
Go to the Start menu, and search for CMD. Now right-click on CMD and select Run as administrator.
Use the command below on your CMD.
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
net localgroup administrators
networkservice /add
net localgroup administrators localservice /add
Now restart your system and you have probably fixed the issue. If you are having any specific error related to Windows Update then you are recommended to search the error code on the search bar. We have provided numerous ways to fix different Windows Update errors. We are sure that you will find the exact way to fix your Windows Update error.
It allows to update the operating system»
It is important to keep all the programs updated, espeacially the operating system. This utility will help you to manage the situation when you cannot update Windows. It will detect and solve the problems that exist regarding the update process. It comes in handy when your PC fails to download and install an update, it helps you scan the problem and suggest possible remedies to the problem that you might be faced with.
Sometimes the errors you get might be as a result of the conflicts from a portion of what you’re trying to download or possibly patches that are not responding, what ever the case may be, be sure that this program will come to the rescue and help you sort out things as they should be.
Enjoy the latest security fixes and performance improvements by making an update. Usually there are several updates per month. This utility will detect the problem that disrupt the update process and will solve it.
Windows Update Troubleshooter is licensed as freeware for PC or laptop with Windows 32 bit and 64 bit operating system. It is in system miscellaneous category and is available to all software users as a free download.
| Share |
| Give a rating |
|
|
| Author |
|
Microsoft
|
| Last Updated On |
| April 20, 2018 |
| Runs on |
| Windows 10 / Windows 8 / Windows 7 / Windows Vista / XP |
| Total downloads |
| 895 |
| License |
|
Free |
| File size |
| 639 B |
| Filename |
|
WindowsUpdateDiagnostic.diagcab |
Loading…