Windows 10 не грузится с nvme

M.2 SSD is notable for fast speed. Nowadays, as the price of SSD decreases, many users use M.2 SSD as their system disk. However, they are unable to load Windows form M.2 SSD due to some reasons. How to fix this issue? This article will show you the full solutions.

With the sharp price reductions in SSD, M.2 interface solid state drives are gradually becoming more and more common. M.2 is primarily used as an interface for super-fast SSDs, both on laptops and desktop Compared with ordinary SATA interface solid-state drives, their speed is much faster.

If you want to learn more information about M.2 SSD or the meaning of M.2, you may read the following content.

What Is M.2 SSD

To understand what M.2 SSD is, we need to first talk about the definition of M.2. M.2, initially introduced as the Next Generation Form Factor (NGFF), is a specification for internally mounted computer expansion cards and associated connectors. The M.2 specification supports applications such as Wi-Fi, Universal Serial Bus (USB), PCI Express (PCIe) and Serial ATA (SATA).

Then what is M.2 SSD? M.2 SSD is an SSD with M.2 interface. It aims to enable high-performance storage in thin, power-constrained devices, such as ultrabook and tablet computers. 

Besides, M.2 is commonly referred to as an mSATA replacement,  as it faster and store more data than most mSATA cards. So more and more people would like to install OS on an M.2 SSD. Check out this post to learn more information about M.2 SSD and SATA SSD: M.2 SSD vs. SATA SSD: Which One Is Suitable for Your PC? – MiniTool.

Here I will give you a brief introduction about how to install Windows 10 on an M.2 SSD. Follow the detailed steps and screenshots as below.

Install Windows 10 on an M.2 SSD

Make sure that you have followed the correct steps to install Windows on an M.2 SSD, as any mistake you make during installation may cause Windows 10 not booting from M.2 SSD issue.

Step 1. Create a Windows 10 installation USB drive with Windows Media Creation Tool.

Step 2. Restart your PC and enter the boot menu, and select the USB drive to boot from it.

Step 3. Then Windows 10 will automatically enter setup mode. Select language to install, time and currency format, and keyboard or input method. Then click Next.

Step 4. Click Install Now to continue.

Step 5. On the “Where do you want to install Windows?” page, choose your M.2 SSD drive as the system drive.

Step 6. Enter your Windows 10 license key. If you don’t, you will be required to enter the license key later.

Step 7.  Accept the license terms and click Next.

Step 8. Choose a way to install Windows 10. If it is a new M.2 SSD without data stored on it, choose [Custom: Install Windows only (advanced)]:.

Step 9. Start installing Windows 10 on your M.2 SSD drive now. Just wait patiently. It won’t be too long.

After installing Windows 10 onto your new M.2 SSD, you can enjoy incredibly fast start-up times which can only take a few seconds.

If you don’t want to install Window onto your new M.2 SSD, you can also choose to migrate OS to M.2 SSD with the help of third-party software, which will move all the contents to your M.2 SSD.

The process of installing Windows 10 on an M.2 SSD seems very simple. However, many users report that they are unable to load Windows from M.2 SSD.

How to fix it if your PC won’t boot after installing M.2 SSD? You may read the following contents to resolve M.2 not booting issue.

Fixes to Unable to Load Windows from M.2 SSD

If you are unable to load Windows from M.2 SSD, what should you do? How to fix it? Here are 4 solutions for your reference.

Fix 1. Disconnect Any Other Storage Drive on Your PC

When you are unable to load Windows from M.2 SSD, you can disconnect other storage devices on your computer and leave the NVMe M.2 drive the only storage drive connected.

And then reboot your computer to see if that works. Some users reported that they fixed the issue in this way. So you can have a try.

Fix 2. Disable the CSM Module

CSM is short for Compatibility Support Module, which is a part of some UEFI firmware implementations. It provides legacy BIOS compatibility by emulating a BIOS environment, allowing legacy operating systems and some option ROMs that do not support UEFI to still be used.

Well then, how to disable CSM in BIOS? Now, let’s see the detailed steps.

Step 1. Enter the BIOS setting on your PC.  The key to enter BIOS varies from PC to PC. It depends on your PC’s manufacturer and model.

Step 2. Locate to the Boot section.

Step 3. Depending on the model of your PC or laptop and the EFI firmware, the setting to change CSM can be different. Notice the possible setting names. Turn it off or disable it.

• Legacy Support
• Boot Device Control
• Legacy CSM
• Launch CSM
• CSM 
• UEFI/Legacy Boot (set to UEFI Only)
• Boot Mode (set to No Legacy Support)
• Boot Option Filter (set to UEFI Only)
• UEFI/Legacy Boot Priority  (set to UEFI Only)

Step 4. Save the change and exit the BIOS setting.

When you encounter the Windows not booting after installing M.2 SSD issue, you may try this way to get rid of the problem.

Fix 3. Update BIOS

Another reason for M.2 SSD not booting is that the motherboard of your computer is not updated to be able to recognize to boot from M.2 SSD. In this case, your PC won’t boot after installing M.2 SSD.

So, always make sure you have the latest revision of BIOS installed on your PC. You can go to the manufacturer’s website to get the latest BIOS update (.cap file) or check out the user manual to find out the way to update your computer’s BIOS.

Install the update from BIOS and reboot. Then the M.2 SSD should be able to be boot you’re your Windows PC.

How to Retrieve Data If Your PC Won’t Boot after Installing M.2 SSD

If you are unable to load Windows from M.2 SSD, how to get files off the computer if there is an important file on your PC.

Try using MiniTool Partition Wizard Pro Ultimate to get files off the unbootable computer. MiniTool Partition Wizard Pro Ultimate can recover various files on your computer such as documents, photos, videos, audio, music, emails and so on.

How to utilize this professional data recovery software, here are the detailed steps.

Step 1. Get MiniTool Partition Wizard Pro Ultimate by clicking the following button. Install it on a normal computer.

Step 2. Create a bootable USB drive with the Bootable Media feature embedded in this software.

Step 3. Connect the bootable drive you’ve made to the computer with the M.2 not booting.

Step 4. Enter the BIOS settings menu and change the boot order to boot from the USB drive.

Step 5. When you get the interface of MiniTool Partition Wizard, launch the Data Recovery wizard.

Step 6. On the Data Recovery interface, select the partition that contains important files on it and click Scan.

Here Data Recovery will list 5 parts, and every part is different from each other.

• Recovery Result: this part shows the last scanning result record.
• Logical Drive: this part shows all existing partitions on your computer.
• Lost Partition: this part shows all lost partitions on your PC.
• Unallocated Space: this part shows all unallocated spaces on your computer.
• Hard Disk: this part lists all hard disks on the computer. You can also select a hard disk to scan.

Step 8. The software is scanning your drive now. During the process, you can pause or stop the scanning by clicking the Pause or Stop button near the progress bar if you find the files you need.

Step 9. Check items you need from the recovery result and click Save button.

Step 10. Choose a directory to save needed files. It is recommended to save the recovered files on another drive. Otherwise, the lost/deleted data could be overwritten. 

This is how to get files off an M.2 SSD not booting with MiniTool Partition Wizard Pro Ultimate. If you want to access important files immediately, try this way.

With the help of MiniTool Partition Wizard Pro Ultimate, I successfully got files off a computer that is unable to load Windows from M.2 SSD.Click to Tweet

Bottom Line

Does this article help you when you are unable to load Windows from M.2 SSD? Now you should know how to boot into Windows from M.2 SSD.

If you have any other good solutions that help you fix the issue, please don’t hesitate to tell us.

If you have any question about how to boot from M.2 NVMe, you can leave a message on the following comment zone and we will reply as soon as possible. If you need any help when using MiniTool software, you can contact us via [email protected].

Варианты.
1. Система х32 или х64?
2. Раздел есть EFI есть, но не известно есть ли на нём загрузочные файлы. И загрузку выбираете с этого диска или с Windows Boot Manager? В загруженной 10-ке открыть ком.строку от имени администратора, ввести diskpart и следующие команды

1
2
3
4
5
6

list disk
sel disk X  - где Х, это номер SSD
list part
sel part N    - где N, это номер раздела 200 МБ
assign letter=m
exit

Diskpart завершит работу, ком.строка останется открытой в ней выполнить

bcdboot J:\windows /s M: /f UEFI

Команду можно скопировать и вставить в ком.строку. Должно будет появиться сообщение, что файлы загрузки созданы. Перезагрузиться и пробовать загрузку с SSD или через Windows Boot Manager. В BIOS должн быть включен режим загрузки UEFI and Legacy в разных его вариациях.
Если система х32, то эти команды можно не пробовать, так как бесполезно.

3.

Можно было на раздел с новой системой развернуть бэкап старой системы (остальные разделы не трогать) и старая ОС должна была загрузиться. Какая разметка была на SSD после чистой установки системы, не проверяли?
4. Временно систему с SSD можно загружать из ОС с HDD. 10-ку на HDD через меню Пуск перезагрузить удерживая зажатой клавишу Shift. После перезагрузки Диагностика -> Дополнительные параметры -> Командная строка. В командной строке ввести

и нажать Enter. Будет произведён поиск операционных систем. Когда система будет найдена ввести y (Да) и нажать Enter.