Установщик драйверов:
В случае, когда вы не хотите тратить время на поиск нужного драйвера для вашего ПК,
к вашим услугам представлен автоматический установщик, который самостоятельно подберет
нужные и самые актуальные драйвера для всех устройств вашей системы.
Скачать Outbyte Drivers Installer вы можете перейдя по этой ссылке
Установить драйвера автоматически
Список драйверов:
Найдено драйверов для устройства «USB-Serial Controller»: 5. Для загрузки необходимого драйвера, выберите его из списка ниже и перейдите по ссылке «Скачать». Пожалуйста, убедитесь в соответствии выбранной версии драйвера вашей операционной системе для обеспечения корректности его работы.
curl PHP extension is required to use this library! See http://php.net/manual/en/book.curl.php
Драйверы для USB-Serial Controller
Universal Serial Bus USB Controller Driver Windows 7 32 Bit:
If you are experiencing a problem with Universal Serial Bus (USB) controllers on your PC, you can download the correct driver for them from this page. All drivers are checked by an antivirus program and are safe to install. Make sure to choose the correct version for your operating system before downloading. You may also want to check for updates. There are three basic types of USB controller drivers: D3XX, UCX, and VCP.
Download Universal Serial Bus USB Controller Driver (Here)
UCM_MANAGER_CONFIG:
This module specifies the driver’s configuration parameters for Universal Serial Bus (USB) devices. This module contains the following structures: USB_BUS_INTERFACE_USBDI_V2, USB_BUS_INTERFACE_V3, USB_COMMON_DESCRIPTOR, USB_CYCLE_PORT_PARAMS, and UCMTCPCI_MANAGER_CONFIG.
UCX:
Unless you use a specific type of USB device, your computer will need a Universal Serial Bus USB Controller driver. USB controllers are a type of device that supports the communication between computers using a standard serial bus. Microsoft Windows uses USB universal controllers to support legacy, high-speed, and SuperSpeed plug-and-play hardware. To download the latest driver, you can get it directly from the manufacturer of your USB device.
D3XX:
The D3XX Universal Serial Bus USB Controller is a USB device that is designed for high-speed data transfers. Its GUID is 0xD1E8FE6A, which is different from D2XX devices. This driver must be installed on your computer if you want to use this device on your PC. Similarly, you can install this driver to your device if you want to use the Type-C connector.
VCP:
The Universal Serial Bus USB Controller Driver is a program that allows your computer to connect to a USB device. The driver has a lot of different features, including the ability to detect your computer’s connection type and speed. It can also identify a wide range of peripherals, including USB cameras and printers. You can install the driver on Windows 7 32-bit and 64-bit computers. This article will describe the different features of the USB controller.
UCM_NOTIFICATIONS:
The UCM_NOTIFICATIONS for the Universal Serial Bus USB Controller Driver Windows 7 32-bit is a collection of information that describes the device. This category of data contains the following: SET_NEW_CAM, UCSI_SET_NOTIFICATION_ENABLE, GET_PDR, GET_CURRENT_CAM, and UCSI_SET_SECONDARY_CAM_ENABLE.
UCX_ROOTHUB_CONFIG:
The UCX_ROOTHUB_COMFIG Serial Bus USB Controller driver is used to configure the underlying device. Specifically, it controls a device called a USB hub. These devices support the same standard, and their drivers are compatible with most operating systems. In addition to these drivers, the USB device must also support several other protocols.
UCM_ASSIGN_CONNECTOR_POWER_LEVEL_PARAMS:
The USB controller has a few functions that make it work. The UCMTCPCI_PORT_CONTROLLER_GET_CONTROL_OUT_PARAMS structure stores data about the port controller object. It also includes the UCM_PD_POWER_DATA_OBJECT and UCMTCPCI_PD_REQUEST_DATA. The USB controller uses these functions to communicate with other hardware and software. Its main function is to provide the host controller driver with the necessary data to communicate with the host computer.
-
Main page -
Drivers
-
Input devices
-
Input devices USB
-
USB Serial Controller D
-
USB Serial Controller D
Version:
3.8.42.0
(22 Feb 2023)
*.inf file:
ser2pl.inf
Windows Vista
,
7
,
8
,
8.1
,
10/11
There are no drivers for USB Serial Controller D for Windows.
Download DriverHub to find drivers automatically.
USB Serial Controller D drivers were collected from official websites of manufacturers and other trusted sources.
Official driver packages will help you to restore your USB Serial Controller D(input devices).
Download latest drivers for USB Serial Controller D on Windows.
Version: 1.3.10.2240 for Windows 7, 8, 10 and 11
Free software
Optional software included
- Yandex Browser
- Opera Browser
- Avast Free Antivirus
- World of Tanks
- World of Warships
December 24, 2014
USB to Serial
This is the USB to RS232 driver for the USB adapter. Also called the usb rs232 driver. In order to setup the driver you need to download the correct USB driver file and run the installer in the file. Once this has been installed you then need to reboot the computer. Once this is done plug the USB into the adapter as this is a USB to serial driver.
USB rs232 driver
Common Problems:
Windows 2000:
- Right-click on the “Prolific USB to Serial Port“, then click Properties.
- Now click on “Port Settings“. Then click the “Advanced” button.
- Always uncheck “Use automatic settings“.
- Now select “Input/Output range“. Click on the “Change Settings” option.
- Type “02E8-02EF” in the Value box. This value will change the port to COM 4.
If COM 4 is in use, you must choose another port. The values for each port are.
- COM 1: 03F8-03FF
- COM 2: 02F8-02FF
- COM 3: 03E8-03EF
- COM 4: 02E8-02EF
Enter the value, then click OK. Click OK again, then click Yes when the “Creating a Forced Configuration” window appears. Click OK. Initiating the configuration process, start by right-clicking on the “Prolific USB to Serial Port” and proceed to access its Properties. Transitioning to the next step, navigate towards “Port Settings“, followed by engaging with the “Advanced” button. It’s important to establish the habit of consistently unchecking the “Use automatic settings” option to ensure control over the setup.
Continuing onward, delve into the “Input/Output range” selection. This prompts the appearance of the “Change Settings” option, which serves as your gateway to further adjustments. Within this dialog, designate “02E8-02EF” as the value to be inputted in the dedicated Value box. This alteration effectively transforms the port into COM 4, catering to your desired configuration. Through this sequence of steps, a smooth transition to COM 4 is facilitated, offering a tailored and optimized setup.
Windows Generic:
If you are having problems then check if you have installed the driver correctly. This is done by doing the following on your computer to check the installation. If the USB driver has been properly installed, “Serialio.com USB Serial Port” or “Prolific USB-to-Serial COM Port” will be displayed. You will note that this is a USB to serial driver.
Windows Vista: Start >> Control Panel >> System >> Hardware >> Device Manager
USB to RS232 Driver Download (Windows 7/Vista – 32bit and 64bit)
.
Incoming Search Terms:
- usb to rs232 driver
- usb rs232 driver
- rs232 to usb driver
- rs232 driver
- rs232 usb driver
- driver usb to rs232
- usb serial controller driver
- serial to usb driver
- usb to serial converter driver
- usb serial port win 7 64
Related Posts
- BlueSoleil Bluetooth Driver (1.000)
- Accton EW3301 Driver (1.000)
- ASUS WL-161 USB Pen Driver (1.000)
- Samsung USB device not recognized (1.000)
- FT232R USB UART Driver (1.000)
Drivers Installer for USB-Serial Controller
If you don’t want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer. It will select only qualified and updated drivers for all hardware parts all alone. To download Outbyte SCI Drivers Installer, follow
this button.
Install drivers automatically
USB-Serial Controller: Drivers List
6 drivers are found for ‘USB-Serial Controller’. To download the needed driver, select it from the list below and click at ‘Download’ button. Please, ensure that the driver version totally corresponds to your OS requirements in order to provide for its operational accuracy.
| Version: | 3.4.48.272 |
Install drivers automatically
Special offer. |
| Date: | 2013-02-05 | |
| File Size: | 71.35K | |
| Supported OS: | Windows XP, Windows Vista 32 & 64bit, Windows 7 32 & 64bit, Windows 8 32 & 64bit |
| Version: | 3.4.42.265 |
Install drivers automatically
Special offer. |
| Date: | 2012-12-03 | |
| File Size: | 70.82K | |
| Supported OS: | Windows XP, Windows Vista 32 & 64bit, Windows 7 32 & 64bit, Windows 8 32 & 64bit |
| Version: | 3.3.4.119 |
Install drivers automatically
Special offer. |
| Date: | 2009-05-21 | |
| File Size: | 50.27K | |
| Supported OS: | Windows XP, Windows Vista 32 & 64bit, Windows 7 32 & 64bit, Windows 8 32 & 64bit |
| Version: | 3.0.1.0 |
Install drivers automatically
Special offer. |
| Date: | 2007-03-12 | |
| File Size: | 49.37K | |
| Supported OS: | Windows XP, Windows Vista 32 & 64bit, Windows 7 32 & 64bit, Windows 8 32 & 64bit |
| Version: | 2.0.0.26 |
Install drivers automatically
Special offer. |
| Date: | 2004-06-25 | |
| File Size: | 13.75M | |
| Supported OS: | Windows XP, Windows Vista 32bit, Windows 7 32bit, Windows 8 32bit |
Top Laptops Searches
-
Lenovo ThinkPad T430s (2355HGU)
-
HP VN402AA-AB6 600-1030af
-
HP HP Pavilion dv6000 (RP943EA#AB9)
-
Lenovo SS09302255
-
HP HP Pavilion dv7(FP869EA#ABFFP869
-
IBM 8187WRZ
-
HP GS210AA-ABV dx2290MT
-
Fujitsu FUTRO S700
-
DakTech DISCOVERY 55
-
Compaq DW254A-ABA SR1010N NA510
Popular Devices
-
Intel(R) I211 Gigabit Network Connection
-
Belkin Surf Wireless Micro USB Adapter
-
Standaard-VGA grafische adapter
-
ALi-Audiobeschleunigungs-WDM-Treiber (ALi)
-
MATSHITA DVD+-RW UJ862A ATA Device
-
Standardi VGA-näyttösovitin
-
Numark USB Audio — WDM 2.9.13
-
EPSON AL-CX16 Scanner
-
nForce4 Low Pin Count Controller
-
Silo générique IEEE 1667