This version of system recovery options is not compatible with the version of windows

На чтение 5 мин. Просмотров 6.1k. Опубликовано 03.09.2019

Восстановление системы – одно из самых простых средств, если установка Windows 7 не удалась. К сожалению, это не всегда работает из-за, казалось бы, случайных проблем, таких как эта версия параметров восстановления системы не совместима .

Когда это происходит, ваш компьютер ведет себя странно и может упорно не восстановить свои правильные параметры загрузки даже после попытки общих решений, как перезагрузки компьютера.

На этом этапе вы сталкиваетесь с заставкой при загрузке, затем с черным экраном и связанными с ним проблемами, и компьютер не запускается.

Единственный выход для вас – это попробовать другие варианты – и их много.

Но перед тем, как мы их обсудим, давайте посмотрим, что вызывает раздражение этой версии опций восстановления системы – несовместимая проблема …

Содержание

Что вызывает эту ошибку?
Решено: данная версия параметров восстановления системы несовместима
Способ 1: измените настройки загрузки
Способ 2: отключите и снова подключите диски
Способ 3: отключить UEFI
Способ 3: создать свежий диск восстановления
Способ 4: загрузка в режиме UEFI/совместимость с устаревшим BIOS

Что вызывает эту ошибку?

Проблемы совместимости . Это может произойти, если установленная версия Windows несовместима с образом Windows, который вы используете для восстановления. Например, это может быть OEM, если вы установили розничную версию. Вы также можете запустить 64-битный диск восстановления в 32-битной Windows.

Неправильные настройки загрузки . Настройка параметров загрузки системы в BIOS во время восстановления может привести к путанице в процессе загрузки и вызвать эту проблему.
Отключенные диски . Эту проблему также можно ожидать, если вы пытаетесь восстановить систему при отключении одного диска (для компьютеров, на которых установлено несколько жестких дисков).

Короче говоря, ошибка возникает из-за неправильной настройки системы.

Решено: данная версия параметров восстановления системы несовместима

Существует несколько способов устранения этой проблемы с восстановлением.

Способ 1: измените настройки загрузки

Для компьютеров с более чем одним жестким диском вы можете попробовать изменить настройки BIOS следующим образом:

Вариант 1. Отключите все остальные диски, кроме системного диска Windows .

Если вы отключите второй жесткий диск (и все остальные дополнительные диски) в BIOS и оставите системный диск Windows (основной жесткий диск) только при восстановлении, сбой совместимости может не произойти. Это должно затем позволить восстановлению Windows 7 идти нормально.

– СВЯЗАННО: 7 способов исправить ошибку Windows Error на ноутбуках

Вариант 2. Настройте доступ к системному диску с нижнего канала .

В качестве альтернативы вам, возможно, придется посмотреть, какие порты установлены на материнской плате различных дисководов – системных, дисководов DVD/Blue-ray и вторичных дисков.

Затем вы подключаете системный диск в нижний канал/слот, например, в слот SATA # 0 (канал 0). Подключите остальные к другим слотам, например, Blue-ray может подключаться к SATA-слоту № 1, RAID на SATA-слотам № 2 и так далее.

Кроме того, переключите последовательности загрузки и убедитесь, что системный диск будет номером 1 в списке приоритетов загрузки системы.

Наконец, перезагрузитесь с диска восстановления.

Способ 2: отключите и снова подключите диски

Если ваш вариант восстановления Windows не сработает, попробуйте отключить, а затем снова подключить ваши жесткие диски, включая любые существующие диски RAID.

Вам нужно будет получить доступ к их портам, удалив системный корпус. Не забудьте отключить компьютер от источника питания перед открытием корпуса.

Повторите попытку восстановления вскоре после повторного подключения силовых кабелей и посмотрите, исправит ли эта версия опции восстановления системы несовместимую проблему.

– СВЯЗАН: 5 лучших программ для восстановления внешних жестких дисков, которые будут использоваться в 2019 году

Способ 3: отключить UEFI

UEFI Secure Boot помогает гарантировать, что ваш компьютер загружается только с использованием надежной прошивки.

Но это иногда вызывает эту версию опции восстановления системы не является совместимой проблемой.

Отключение безопасной загрузки может, таким образом, устранить нежелательную неудачу.

Шаги:

Откройте меню BIOS вашего компьютера. Вы нажимаете правильную клавишу во время загрузки, например, Esc, F1, F2 или F12.
Найдите настройки Безопасная загрузка и измените их на Отключено . Этот параметр можно найти в разделе Аутентификация , , Безопасность , или .
Сохраните изменения и выйдите.
ПК перезагружается.

Если все хорошо, он перезапустит восстановление и выполнит шаги до завершения.

Способ 3: создать свежий диск восстановления

Возможно, вы пытаетесь восстановить установку Windows с использованием устаревшего DVD-диска восстановления Windows 7.

Это происходит особенно на более новых машинах, которые поставляются с включенным UEFI вместо обычного интерфейса прошивки BIOS.

Шаги:

На другом компьютере с разделом EFI нажмите кнопку Пуск (сначала вставьте USB-накопитель/DVD-диск).
Выберите в меню Панель управления .
Выберите Система и обслуживание.
Выберите Резервное копирование и восстановление .
Нажмите Создать диск для восстановления системы на левой панели.
Следуйте инструкциям.
Вставьте новый диск восстановления Windows 7, затем перезагрузите компьютер и выполните обычные действия для восстановления образа Windows 7.

Способ 4: загрузка в режиме UEFI/совместимость с устаревшим BIOS

Другой способ справиться с этой ошибкой – загрузка в режиме UEFI.

Это связано с тем, что загрузка в этот режим при восстановлении Windows устраняет любые конфликты совместимости с вашего USB/DVD.

Шаги:

Вставьте установочный DVD/USB-ключ Windows.
Загрузите компьютер с этого DVD/USB-ключа еще раз, нажав любую клавишу при загрузке.
Перейдите к мастеру установки, пока не найдете тип установки . Здесь вы выбираете Выборочная .
Откроется окно Где вы хотите установить Windows . Сделайте это: выберите каждый раздел, показанный на диске, и выберите Удалить .
Диск теперь покажет одно огромное нераспределенное пространство/область. Выберите это нераспределенное пространство и нажмите Далее .
Windows автоматически обнаружит, что компьютер загрузился в режиме UEFI, отформатирует диск и начнет установку.
Не устанавливайте. Вместо этого нажмите X, чтобы остановить процесс (после удаления раздела), затем выберите восстановление.
Убедитесь, что параметры восстановления системы теперь работают нормально.

Источник

Remove From My Forums

Question
This version of System Recovery Options is not compatible with the version of windows you are trying to repair. Try using a recovery disc that is compatible with this version of windows.

This is the error i’m recieving when trying to restore a BMR backup to another server.

The two servers are identical and the version of windows i am using is Server 2008 R2 x64 SP1 which is what is on the original server, both servers are set in UEFI boot mode.

Can anyone help please.

Thanks

Answers

- Marked as answer by
  
  Wednesday, December 14, 2011 7:00 AM

Источник

Making some modifications to your boot settings should do

by Madalina Dinita

Madalina has been a Windows fan ever since she got her hands on her first Windows XP computer. She is interested in all things technology, especially emerging technologies… read more

Updated on October 4, 2023

If you are dealing with this version of system recovery is not compatible error, you can fix it by creating a fresh recovery disk.
Another effective solution is to boot in UEFI Mode/ legacy BIOS-compatibility mode.

XINSTALL BY CLICKING THE DOWNLOAD
FILE

System recovery is one of the easiest remedies if your Windows 7 installation has failed. Sadly, it doesn’t always work due to seemingly random issues such as this version of system recovery options is not compatible error.

When it occurs, your PC may not be able to recover its correct boot settings and might show a black screen. While this issue can look scary, the solutions in this guide will help you fix it quickly.

Why am I getting the version of system recovery options is not compatible error?

Compatibility issues: This hitch can occur when your installed version of Windows is incompatible with the Windows image you are using for recovery. For example, it could be an OEM while you have installed a retail edition. You could also be running a 64-bit recovery disk on a 32-bit Windows.

Wrong Boot Settings: Adjusting the system boot settings in BIOS during repair could confuse the boot process and cause this problem.
Disconnected Drives: You can also expect this challenge if you’re attempting a system restoration when one drive is disconnected (for PCs installed with multiple hard drives).

Long story short, the error arises due to a faulty system repair setup.

How can I fix this version of system recovery is not compatible error?

1. Modify Your Boot Settings

1.1. Disable all other disks but your Windows system disc

If you disable your second hard disk (and every other extra disk) in BIOS and leave the Windows system disc (primary hard drive) only when recovering, the compatibility hiccup may not occur. This should then allow the Windows 7 recovery to proceed normally.

1.2. Set the System Disk to be accessed from a lower channel

Alternatively, you may have to look into which ports the various drives – system, DVD/Blu-ray drives, and secondary disks are installed on the motherboard.

How we test, review and rate?

We have worked for the past 6 months on building a new review system on how we produce content. Using it, we have subsequently redone most of our articles to provide actual hands-on expertise on the guides we made.

For more details you can read how we test, review, and rate at WindowsReport.

You then rewire the system drive into a lower channel/slot, for example, SATA slot #0(channel 0). Connect the rest into the other slots. For instance, the Blu-ray can go to SATA slot #1, RAID on SATA slot #2, and so on.

not compatible with this version of windows

In addition, switch boot sequences and ensure that the system disk will be number 1 in the system boot priority list. Lastly, reboot from your recovery disk.

Read more about this topic

Fix: Bluetooth Device is not Discoverable on Windows 7
How to Easily Recover Uninstalled Programs on Windows 11
DLL Files Missing in Windows 7? 8 Ways to Fix It
How to Fix View BitLocker Keys Stuck in Loading Cycle
5 Best Email Recovery Software for Outlook to Download

2. Disconnect and reconnect the drives

If your Windows repair option won’t work, try disconnecting and then reconnecting your hard drives, including any existing RAID disks.

You would need to access their ports by removing the system case. Remember to unplug the PC from the power source before opening the case.

Retry the recovery soon after reconnecting the power cables and see if this will fix this version of system recovery options is not compatible problem.

3. Disable UEFI

Open your PC’s BIOS menu. You press the correct key during boot sequence, for example, Esc, F1, F2, or F12.
Locate the Secure Boot settings, and change it to Disabled. You can find this option under either Authentication, Security, or Boot.
Save the changes and exit.
The PC reboots.

UEFI Secure Boot helps to ensure that your computer boots using trusted firmware only. But it occasionally triggers this version of system recovery options is not compatible issue.

Disabling Secure Boot can hence remove the unwelcome setback. If all is well, it will re-launch recovery and run the steps to completion.

4. Create a fresh recovery disk

From another EFI partitioned machine, click the Start button (insert a USB flash drive/DVD first).
Select Control Panel from the menu.
Select System and Maintenance.
Choose Backup and Restore.
Click Create a system repair disc from the left pane.
Follow the steps as directed.
Insert the new Windows 7 recovery disk, then restart your PC and run the usual steps to recover your Windows 7 image.

It can be that you’re attempting to recover your Windows installation using an outdated Windows 7 recovery DVD.

This happens especially in newer machines that come with UEFI enabled instead of the conventional BIOS firmware interface.

5. Boot in UEFI Mode/ legacy BIOS-compatibility

Insert the Windows installation DVD/USB key.
Boot your PC to this DVD/USB key again by clicking any key at bootup.
Go through the installation wizard until you come to choose an installation type. Here you select Custom.
The Where do you want to install WindowsWindow pops up. Do this: Select each partition shown on the drive, and choose Delete.
The drive will now show one huge unallocated space/area. Select this unallocated space and press Next.
Windows will automatically detect that the computer has booted into the UEFI mode and will reformat the drive and begin the installation.
Don’t install. Instead, Click X to halt the process (after deleting the partition), then choose repair.
Check if the System Recovery options are now working fine.

Another way to beat this error is by booting in UEFI mode.

That’s because booting into this mode when recovering Windows eliminates any compatibility conflicts from your USB/DVD.

With the solutions in this guide, you should now be able to fix this version of system recovery options is not compatible with the version of Windows error. Similarly, if you are dealing with a Window recovery loop error, check our detailed guide to fix it.

Feel free to let us know the solution that helped you fix this error in the comments below.

Источник

Windows 7 System Recovery Options is not compatible—what to do?

Thread starter

Hastibe
Start date

Feb 25, 2015

You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.

: Feb 25, 2010

: 269

: 0

: 18,810

After trying to resume my laptop (Lenovo Y480) from hibernation (do this almost every day), it didn’t start-up (just stayed running on a lit, black screen). Powered it off and back on, and nada. Just goes back to a lit, black screen now. Also tried doing a hard reset by unplugging it, taking the battery out, and holding down the power button, but no dice.

I can access BIOS and the boot device options, and it will boot off of the Windows 7 x64 DVD from which I originally installed the OS, but when I try to run system repair, this is the message the DVD gives me:

«This version of System Recovery Options is not compatible with the version of windows you are trying to repair. Try using a recovery disc that is compatible with this version of windows.»

…Talk about letting me down when I needed it! What can I do to repair my Windows 7 installation (assuming that’s the problem)? Any help would be very appreciated!

: Apr 17, 2006

: 3,703

: 1

: 26,960

With the laptop turned off, remove its battery for 1min and then put it again, turn on the laptop and press F8 to get into Windows boot options, select boot in safe mode, once in windows safe mode simply restart your laptop, this should break the hibernation cycle.

that message normally comes up when your using a 32bit windows disk on a 64bit Os, or vice versa
you could always download and burn a copy of the dart tools from Microsoft, and use that to do system repair, or you could try a diff windows disk,
if your dealing with non store brought software, its quite common for the 64bit Os to be installed on a 32bit boot disk witch means the system repair wont work as theres 2 diff versions for 32 bit and 64bit same thing can happen if your trying to install raid drivers and your windows disk has the wrong version of the bootloader

: Feb 25, 2010

: 269

: 0

: 18,810

[quotemsg=15373409,0,57141]With the laptop turned off, remove its battery for 1min and then put it again, turn on the laptop and press F8 to get into Windows boot options, select boot in safe mode, once in windows safe mode simply restart your laptop, this should break the hibernation cycle.[/quotemsg]
Unfortunately, that didn’t work—same thing as before, it shows the BIOS page and then immediately goes to a lit, black screen (with a non-flashing white underscore in the top, left-hand side).

: Feb 25, 2010

: 269

: 0

: 18,810

[quotemsg=15373774,0,1083315]that message normally comes up when your using a 32bit windows disk on a 64bit Os, or vice versa[/quotemsg]
I tried using a legitimate Windows 7 Pro x64 DVD for a Windows 7 Pro x64 installation.

[quotemsg=15373774,0,1083315]you could always download and burn a copy of the dart tools from Microsoft, and use that to do system repair, or you could try a diff windows disk,[/quotemsg]
This is making me feel like an idiot, but I can’t find any links to download or buy Microsoft DaRT—do you have any suggestions about how I go about getting this?

[quotemsg=15373774,0,1083315]if your dealing with non store brought software, its quite common for the 64bit Os to be installed on a 32bit boot disk witch means the system repair wont work as theres 2 diff versions for 32 bit and 64bit same thing can happen if your trying to install raid drivers and your windows disk has the wrong version of the bootloader [/quotemsg]
I was just about to protest that I have a legitimate installation of Windows 7 Pro, but I actually honestly don’t know—I got this laptop from a friend with the operating system already installed. I’ve never had any notifications about it not being genuine, but I’m not sure if it is. If the installation isn’t genuine, is my only option for recovery getting the data off of the hard drive via an external enclosure or something and then formatting it and starting over with a fresh install? Ughhhhh…

: Feb 25, 2010

: 269

: 0

: 18,810

Any other ideas, guys? It won’t let me boot from anything, but this Windows 7 Pro x64 DVD that I have. Tried using a Windows 7 x64 repair disk, a bootable USB version of it, the Ultimate Boot CD, a Lenovo OneKey Recovery DVD I had created a few years ago, a rescue CD for Macrium Reflect, and, it won’t allow booting from any of them. I select to boot from the the device in the boot options menu, and then it just goes to a lit, black screen.

For the Windows 7 Pro x64 DVD, I can select to boot from the DVD drive via EFI; I don’t get that option for any of the other DVDs/CDs/USBs. I have enabled USB boot in the UEFI (we don’t call it BIOS anymore?) and I’ve tried disabling UEFI in the UEFI or BIOS or whatever, and that doesn’t change anything, as far as I can tell.

Please help? What else should/can I try?

: Apr 17, 2006

: 3,703

: 1

: 26,960

Gotta break the hibernation cycle somehow, try booting with a Live OS like Ubuntu, once in Ubuntu look for the hiberfil.sys file and rename it, i.e. hiberfil.sys.bak, restart your laptop, possibly it will give an error on next boot, in the next one however it should boot to Windows or at least allow you to enter Windows Boot options with F8 and choose from there safe mode.

: Feb 25, 2010

: 269

: 0

: 18,810

I’m happy to try that, but I haven’t been able to get any boot DVDs/CDs/USBs to work. You think a Live OS Ubuntu one will work?

: Feb 25, 2010

: 269

: 0

: 18,810

Well, go figure that it takes Linux to fix Windows.

The Ubuntu Live OS worked! I can’t access my hard drive, though, it gives this error:

«Error mounting /dev/sda2 at /media/ubuntu/Boot: Command-line ‘mount-t»ntfs»-o»uhelper-udisks2,nodev,nosuid,uid=999,gid=999,dmask=0077,fmask=0177″ «/dev/sdsa2» «/media/ubuntu/Boot'» exited with non-zero exit status 14: Windows is hibernated, refused to mount. Failed to mount ‘/dev/sda2’: Operation not permitted
The NTFS partition is in an unsafe place. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the ‘ro’ mount option.

: Feb 25, 2010

: 269

: 0

: 18,810

Ran boot-repair, just for the heck of it, no luck: paste.ubuntu.com/10438984

: Feb 25, 2010

: 269

: 0

: 18,810

Okay, actually running boot-repair allows me to mount my hard drive now. BUT, there isn’t any hiberfil.sys file on C:. Still just going to a lit, black screen when I try to load Windows. What else can I try in Ubuntu?

: Apr 17, 2006

: 3,703

: 1

: 26,960

hmm, really strange, there should be that file…

: Feb 25, 2010

: 269

: 0

: 18,810

[quotemsg=15381555,0,57141]hmm, really strange, there should be that file…

At this point I only see two options, either find out in other forums how to change windows registry to stop trying to boot from hiberfil.sys (+ how to do it from Linux or at least a Live Mini Windows XP like the one in Hiren’s Boot), or with Linux/ Mini Win XP backup all your data and do a fresh install.[/quotemsg]
Spent the last couple hours figuring out how to edit the Windows registry using chntpw in Unbuntu, and successfully disabled hibernation, but not change. Let me know if you have any other ideas about registry edits I should try?

: Feb 25, 2010

: 269

: 0

: 18,810

Okay, and actually I didn’t successfully disable hibernation—chntpw isn’t saving the changes I made to the registry. It’s suppose to prompt me to save them when I quit, but it isn’t. Can’t find anything online about what I or the program might be doing wrong—GAH.

UPDATE: okay, got chntpw to save the changes (just had to start it «chntpw -e»), but, no change.

: Feb 25, 2010

: 269

: 0

: 18,810

…And another update: I can also get access to a DOS command prompt via a Windows PE 5.0 boot USB. Just ran a chkdsk—no problems. Running this now: sfc /scannow /offbootdir=e:\ /offwindir=c:\windows — no issues found.

: Apr 17, 2006

: 3,703

: 1

: 26,960

Keep digging in other forums or try microsoft support forum, there must be some command to disable the awake from hibernation attempt, otherwise, reinstall.

: Feb 25, 2010

: 269

: 0

: 18,810

Thanks for the response, but I’m not sure if that’s the problem anymore. There is no hiberfil.sys file, after all, and I did successfully edit the registry to disable hibernation (following the «Disable Hibernate Through Regedit» section in http://www.howtogeek.com/howto/7564/how-to-manage-hibernate-mode-in-windows-7/) via chntpw in Ubuntu.

: Apr 5, 2010

: 3,881

: 60

: 23,240

Not sure why you thought it was a hibernation issue. I don’t see any evidence of that.

Nobody has mentioned safe mode. Can you boot into safe mode? Also, do you have windows 7 pro installed? I know you said the disk was windows 7 professional, but no mention of the edition installed.

: Apr 5, 2010

: 3,881

: 60

: 23,240

Nevermind, somebody did mention safe mode. No windows splash screen? Just straight to black?

: Feb 25, 2010

: 269

: 0

: 18,810

[quotemsg=15394076,0,362109]Nevermind, somebody did mention safe mode. No windows splash screen? Just straight to black? [/quotemsg]
Thanks for your posts, but read the first post dood.

Similar threads

Advertising
Cookies Policies
Privacy
Term & Conditions

Источник

This Version Of System Recovery Options Is Not Compatible With This

Contents

1 This Version Of System Recovery Options Is Not Compatible With This
2 [solved] The Version Of This File Is Not Compatible With The Version Of Windows
- 2.1 Conclusion
  - 2.1.1 Related image with this version of system recovery options is not compatible with this
  - 2.1.2 Related image with this version of system recovery options is not compatible with this

Immerse Yourself in Art, Culture, and Creativity: Celebrate the beauty of artistic expression with our This Version Of System Recovery Options Is Not Compatible With This resources. From art forms to cultural insights, we’ll ignite your imagination and deepen your appreciation for the diverse tapestry of human creativity. I to options not But to it normally disc repair recovery options startup os the time or recovery however things get with few in a- of of try in to start compatible more booting i system it i windows if are mode into is says one no you using repair- version quotthis but original is the choose dvd drive put trying need matter check version

This Version Of System Recovery Options Is Not Compatible Windows

This Version Of System Recovery Options Is Not Compatible Windows
In reply to palcouk’s post on april 12, 2012. have done some more testing on this issue and have found that if there is more than one hdd on the system then to prevent the occurence of: . «this version of system recovery options is not compatible with the version of windows you are trying to repair. try using a recovery disc that is compatible. «this version of system recovery options is not compatible with the version of windows you are trying to repair. try using a recovery disc that is compatible with this version of windows.» so a friend’s hard drive went bad (power surge, virus or some other unknown event).

This Version Of System Recovery Options Is Not Compatible Windows

This Version Of System Recovery Options Is Not Compatible Windows
1. modify your boot settings 1.1. disable all other disks but your windows system disc if you disable your second hard disk (and every other extra disk) in bios and leave the windows system disc (primary hard drive) only when recovering, the compatibility hiccup may not occur. this should then allow the windows 7 recovery to proceed normally. 1.2. «this version of system recovery options is not compatible with the version of windows you are trying to repair. try using a recovery disc that is compatible with this version of. 1. i made a new system recovery disc just before attempting this swap. 2. my old hdd has not completely failed, but i keep getting diagnostic messages that it is time to replace. i can still boot to it. 3. i have tried a number of forum recommended approaches to work around without success. 1 sign in to vote hi, to enable the recovery: the cpu architecture, os version & bootloader of backup and the recovery setup media should match. please check the below data: cpu architecture: the x64 setup media can recover x64 os backup and similarly x86 setup media can recover x86 os backup.

This Version Of System Recovery Options Is Not Compatible Fix

This Version Of System Recovery Options Is Not Compatible Fix
1. i made a new system recovery disc just before attempting this swap. 2. my old hdd has not completely failed, but i keep getting diagnostic messages that it is time to replace. i can still boot to it. 3. i have tried a number of forum recommended approaches to work around without success. 1 sign in to vote hi, to enable the recovery: the cpu architecture, os version & bootloader of backup and the recovery setup media should match. please check the below data: cpu architecture: the x64 setup media can recover x64 os backup and similarly x86 setup media can recover x86 os backup. Select recovery > configure system restore > configure and see if the turn on system protection option is selected. if the turn on system protection option is not selected, system protection isn’t turned on and there aren’t any restore points. in this scenario, you won’t be able to recovery your pc using a system restore point and will need. But i need to get into the os one more time to check few things, however it is booting in recovery mode options no matter if i choose start normally or startup repair, i put original disc in dvd drive but it says: «this version of system recovery options is not compatible with the version of windows you are trying to repair. try using a.

[solved] The Version Of This File Is Not Compatible With The Version Of Windows

the version of this file is not compatible with the version of windows you’re running. check your computer’s system information to my website techwhitesolution canon eos 200d ii amzn.to 3tycxwi digitek led ring light with 6 feet the version of this file is not compatible with the version of windows. how to fix system recovery option for windows 7 solution 2022 || how to repair windows 7 new update please visit my vlog this video shows step by step how to use your copy of windows 7 vista on cd,dvd, or usb to repair problems preventing your learn how to use the windows system restore feature to repair software issues from outside of the operating system. a windows in this video we are going to how to troubleshoot issue related to «the version of this file is not compatible with the version of see our entire index of microsoft mcts 70 680 videos at professormesser when something goes wrong, you how to fix system recovery option for windows 7 by using startup repair tool in safe mode on windows 7. tags: safe mode this is a simplest method we can use to bypass it. it occurs mainly on those exe files that have less size about 2mb 20mb by my problem: startup repair startup repair windows how do i fix the startup repair loop in windows 7? how do i fix startup repair? repair windows 7 startup using a built in utility in windows. topics addressed in this tutorial: repair windows 7 without cd repair

Conclusion

Having examined the subject matter thoroughly, there is no doubt that the post offers informative insights about This Version Of System Recovery Options Is Not Compatible With This. From start to finish, the writer demonstrates a wealth of knowledge on the topic. Especially, the discussion of X stands out as particularly informative. Thanks for taking the time to this post. If you need further information, please do not hesitate to contact me through social media. I look forward to hearing from you. Additionally, below are a few related content that might be helpful:

Источник

Что вызывает эту ошибку?

Решено: данная версия параметров восстановления системы несовместима

Способ 1: измените настройки загрузки

Способ 2: отключите и снова подключите диски

Способ 3: отключить UEFI

Способ 3: создать свежий диск восстановления

Способ 4: загрузка в режиме UEFI/совместимость с устаревшим BIOS

Question

Answers

Why am I getting the version of system recovery options is not compatible error?

How can I fix this version of system recovery is not compatible error?

1. Modify Your Boot Settings

1.1. Disable all other disks but your Windows system disc

1.2. Set the System Disk to be accessed from a lower channel

How we test, review and rate?

2. Disconnect and reconnect the drives

3. Disable UEFI

4. Create a fresh recovery disk

5. Boot in UEFI Mode/ legacy BIOS-compatibility

Windows 7 System Recovery Options is not compatible—what to do?

Similar threads

[solved] The Version Of This File Is Not Compatible With The Version Of Windows

Conclusion