Stop all docker containers windows

It’s an understatement to say that Docker is a game-changer for systems engineers and developers. You can run almost any application with a single command and customize it for your environment via a consistent container-based interface. But as containers proliferate, controlling them gets more complicated, too. Managing containers from the command line can be painful, but setting up an orchestration tool like Kubernetes or Docker Swarm is overkill for smaller systems.

Stopping and removing a container from the command line takes two steps. Stopping and removing two containers is four. And stopping and removing 10 containers is—well, you get the idea. Let’s look at how to make the Docker command line easier to use. We’ll focus on stopping and removing containers. Then, we’ll look at Docker Compose, another tool that makes managing smaller collections of containers easier.

These examples will be for systems that use Docker’s shell-based tools, including macOS, Linux, and Windows with WSL. You’ll need to have Docker installed, as well as docker-compose.

Stopping and Removing All Containers

For the Impatient

Here’s a command that will stop and remove all of the containers on your system, assuming the user running it is root or a member of the docker group.

$ docker ps -aq | xargs docker stop | xargs docker rm

How does this command work? Let’s take a closer look.

Listing Containers

The first part of the command lists all of the containers on the system. Here’s a screenshot of a system with four containers:

The -aq option tells docker ps to list all containers (-a) by container ID (-q). You can combine the two arguments after a single dash (—).

If you drop the a, you only see three containers:

That’s because one of them isn’t currently running. Here’s a long listing:

Here’s the other half of the display. You’ll want to refer to it later.

So, if you want to stop all of the running containers and remove everything, regardless of its previous state, provide the —a to docker ps.

What’s Xargs?

The next two parts of the command to stop and remove all containers start with xargs. Xargs is a Linux utility that accepts entries from its input and executes the command you specify for each entry.

Here’s an example that gives you an idea of what’s happening when you pipe the output of docker ps -aq to xargs.

Remember the output from docker ps -aq.

When you pass it to xargs without any additional arguments, it defaults to /bin/echo for its command, and it appends its input to the end of the command you specify:

This command transformed the output of docker ps to:

echo 344bf90e09e7 
echo 8667dc69816a 
echo 322f55c7b223 
echo c5df9ef22d09

Since you didn’t tell echo to add a carriage return, it printed all four IDs on one line.

That’s not a very useful example. So, let’s get fancy.

Docker port lists information about network ports in a container.

You need to pass it the container ID and the port you’re interested in. So, we need to tell xargs how to run this command.

Here’s how to examine port 80 on all four containers.

First, this command line runs docker ps -aq.

Then it pipes (|) the output to xargs with -I ‘ID’ as the first two arguments. This tells xargs that when it sees ‘ID’ in the command that follows, replace it with the input from the pipe.

So, xargs transforms command docker port ‘ID’ 80 into these four commands:

docker port 344bf90e09e7 80
docker port 8667dc69816a 80
docker port 322f55c7b223 80
docker port c5df9ef22d09 80

The output from these four commands shows us that Docker has mapped three of the containers to ports 8083, 8082, and 8081. The fourth container has no port since it never finished starting.

0.0.0.0:8083
:::8083
0.0.0.0:8082
:::8082
Error: No public port ‘80/tcp’ published for 322f55c7b223
0.0.0.0:8081
:::8081

Scroll back to the beginning of this post to see the output of docker ps a to see the mappings. 

Stopping and Removing All Containers

So now we know how the rest of the command works.

$ docker ps -aq | xargs docker stop | xargs docker rm

Will be expanded to:

docker stop 344bf90e09e7
docker stop 8667dc69816a
docker stop 322f55c7b223
docker stop c5df9ef22d09

docker rm 344bf90e09e7
docker rm 8667dc69816a
docker rm 322f55c7b223
docker rm c5df9ef22d09

Let’s try it on the demo system:

Success! Docker rm echoed the IDs of the containers as it deleted them. Since you can’t delete a running container, the stop commands must have worked.

That’s the nice way to stop and remove a set of containers. 

Remove With Extreme Prejudice

There’s a shorter, more concise, and much less friendly way to stop and remove all containers on a system.

$ docker ps -aq | xargs docker rm -f

This runs docker rm -f on each container. It’s an easier way to remove the containers, but you probably don’t want to use it. 

Here’s why: In order to stop a container, Docker has to shut down the process running inside it. It does this by sending the application a signal. A signal is a notification to a Linux process that something happened. In this case, the signal means it’s time to shut down.

But not all signals are created equal.

Docker stop sends SIGTERM. Applications have the option to ignore, block, or handle SIGTERM. Well-behaved applications use this opportunity to close any threads or child processes and perform basic house-cleaning tasks. For example, a server application could notify clients that it is going away, or a database could flush any unsaved transactions.

Docker rm -f sends SIGKILL. Processes cannot block or handle this signal. They are immediately terminated, with no chance to do any housekeeping at all. This can lead to data loss.

Docker stop will only use SIGKILL if the application does not shut down in a reasonable period of time.

So, using stop instead of rm -f is a good idea, whether you’re stopping a set of containers or just one at a time.

Docker Compose

If you don’t want to spend a lot of time on the command line managing containers, or if you have a set of containers that need to talk to each other, Docker Compose might be a better option than the command line.

Docker Compose uses a YAML configuration file to configure, start, and stop containers. Let’s look at a simple file that starts three containers:

# docker-compose.yml
version: '3.7'
services:
  one:
    image: docker/getting-started
    user: root
    ports:
      - 8081:80
    container_name: one
  two:
    image: docker/getting-started
    user: root
    ports:
      - 8082:80
    container_name: two
  three:
    image: docker/getting-started
    user: root
    ports:
      - 8083:80
    container_name: three

Each container is defined as a service. This file defines three containers, named one, two, and three. Like the example above, they run Docker’s getting-started image and map port 80 to 8081, 8082, and 8083, respectively.

Create this file in an empty directory. Then tell docker-compose to start with docker-compose up -d.

It created the three containers, and you can see them running with docker ps -a.

Stopping them is just as easy. Simply run docker-compose down in the same directory.

Docker-compose’s output is more user-friendly than docker’s. It stopped all of the containers listed in the file. Docker ps confirms that they are gone.

This is only the tip of the iceberg when it comes to Docker Compose’s capabilities. You can use it to define containers, volumes to store persistent data, access control, private network for containers to communicate over, and much more. CloudBees has a tutorial on how to install and run Jenkins with Docker Compose that demonstrates more of its capabilities.

Wrapping Up: Stopping and Removing Containers

In this post, you saw how to stop and remove all containers on your system with a single command. You learned how to use xargs to tell Docker to run the same command over a set of containers. You also took a look at the nice and not-so-nice ways to shut down a containerized application.

Then we covered Docker Compose and how you can use it to manage a set of containers. You saw how to replace the command line examples we covered with a YAML configuration file and a pair of simple commands.

So, start using these tools to manage your containers today, and take a look at our Docker Compose tutorial for more ideas.

This post was written by Eric Goebelbecker. Eric has worked in the financial markets in New York City for 25 years, developing infrastructure for market data and financial information exchange (FIX) protocol networks. He loves to talk about what makes teams effective (or not so effective!).

Docker allows us to use the Docker rm and Docker stop commands to remove or stop one or more containers. However, if you want to stop and remove all the containers simultaneously, you can combine sub-commands to list all containers with the Docker stop and remove commands. Moreover, we can only remove those containers that are not actively running in our host machine.

Hence, it’s very necessary to stop all the containers before we try to remove them. We can either use the force option along with the Docker rm command to remove all containers forcefully or first stop all Docker containers and then remove them. We can also use the Docker kill command along with a sub-command to kill all the containers simultaneously.

Also, check out our complete and free Docker Tutorials.

The Docker command to stop one or more containers is –

$ docker stop [OPTIONS] CONTAINER [CONTAINER...]

We can use the –time option to provide a grace period before stopping a container. To remove all the containers simultaneously, we need to tweak this command a bit. We can use a subcommand in place of the container that will list all the container IDs. This will help us to stop all Docker containers.

$ docker stop $(docker ps -a -q)

In the above command, we have used the Docker stop command. In place of the container name, we have used another sub-command called docker ps along with options such as a and q. The -a option stands for all and is used to list all containers. The -q option is known as quiet and it lists only the container IDs. Let’s try to execute this command.

We can use the docker ps command to list all the active containers first.

$ docker ps

Now, we can use the above-discussed docker stop command.

You can see that we have successfully stopped all containers simultaneoulsy.

How to stop and remove all Docker containers?

We can use a similar method to remove all Docker containers together. Along with the Docker rm command, we can use a sub-command that will list all the Docker container’s ID. However, to remove Docker containers, we need to make sure that none of them are running actively. For that, either we can first stop all containers and execute this command. Or we can use the force option to remove all containers forcefully. Let’s try to do the second one.

$ docker rm -f $(docker ps -a -q)

How to Kill all Docker Containers?

The Docker kill command helps us to kill all the processes running inside Docker containers. We can use the Docker kill command along with a sub-command to list all container IDs. This will help us to kill all Docker containers at once.

$ docker kill $(docker ps -q)

You can see that all the active containers have been killed.

Final Thoughts!

We can use the sub-command to list all container IDs along with the Docker stop, remove, and kill commands. This will allow us to stop all Docker containers at once and remove them. In this article, we have explained how to stop, remove, and kill all Docker containers together. If you have any queries or suggestions, please mention them in the comment box and we will have our expert get back to you as soon as possible.

Helpful Articles –

1. How to Build Docker Images?
2. Docker Container Lifecycle
3. How to Remove All Docker Images?
4. How to start a Docker container?

Docker Stop All Containers

In this quick guide, we will see how to stop all the running Docker containers.

Before diving into the ‘how’, it’s essential to understand the ‘why’. Here are some reasons you might want to stop all containers: 

Maintenance: System or application upgrades often require containers to be stopped to avoid potential conflicts or data loss. 

Performance Diagnostics: If you’re diagnosing a system performance issue, stopping all containers can help isolate the problem. 

Cost-saving: In cloud environments, stopping unnecessary containers can save costs. 

Example

1. Listing Active Containers

Before stopping all containers, it’s good practice to check which ones are currently running. Use the following command:

docker ps

This command lists all active containers, their IDs, names, and other essential details.

2. Stopping All Containers 

To stop all running containers at once, use this Docker command:

docker stop $(docker ps -aq)

Let’s break down this command: 

docker ps -aq: Lists all container IDs. 

docker stop: Halts the container. 

By combining these commands, you instruct Docker to stop every container ID returned by the list command.

3. Verifying the Operation 

After executing the stop command, it’s prudent to verify that all containers have indeed been halted. Run:

docker ps

You should see an empty list, indicating that no containers are currently running.

Stopping the Particular Container

Choose the container that you want to stop and use its container ID or name with the following docker stop command:

docker stop [CONTAINER_ID or CONTAINER_NAME]

For instance, if your container ID is abc12345def, you’d use:

docker stop abc12345def

Conclusion 

Stopping all Docker containers can be a handy operation, but with great power comes great responsibility. Always approach this task with caution, especially in environments where continuous service is essential. Docker’s flexibility and command-line prowess offer efficient ways to manage containers, ensuring that administrators retain full control over their container fleet. 

Related Container Management Guides

• Docker Create Container
• Docker Stop All Containers
• Docker Remove All Stopped Containers
• Docker Start Container
• Docker Restart All Containers
• Docker Go Inside Container — The docker exec Command
• Docker List Containers
• Docker Fetching Logs from Containers
• Docker Rename Container
• Docker Remove Unused Containers

Docker