Qualcomm HS-USB QDLoader 9008 Driver is a very useful tool when it comes to detecting your Qualcomm powered phone to a computer. Basically, It creates a bridge to communicate any Qualcomm smartphone to a computer or laptop. Here you can download Qualcomm 9008 Driver latest official version for free of cost. So, If you have any Qualcomm powered Android smartphone or tablet and try to connect it to the computer, then the Qualcomm drivers will help you to fix the problem very quickly.
Once, you will install Qualcomm HS-USB QDLoader Driver successfully then it will detect Qualcomm smartphone to the computer for MTP, Charging, File Transfer, flashing, and Firmware update. On this page, you can download Qualcomm USB All drivers including old and latest versions from here. So check below to download the QCOM 9008 Drivers for your PC.
Note: Qualcomm drivers compatible with all versions of Microsoft Windows 7, Windows 8, Windows 10 version (32 & 64bit).
General Connecting: Qualcomm driver allows connecting any Mediatek devices to the computer or laptop to transfer data between the device and the computer. Make sure, to install the USB driver and enable USB debugging mode on your phone before connecting.
Flash Stock Firmware: If your Qualcomm device stuck at the Boot logo or not turning on then you easily flash the stock firmware to fix your device. In this case, you need to install the MTK USB Driver to get detected your device to the Computer.
Repair IMEI: Sometimes Qualcomm USB VCOM and CDC driver unable to detect devices while writing IMEI using SN and MAUI meta IMEI writer tool. In this situation, Qualcomm Drivers helps to get detected your device to the Computer.
Official Supports: Well, Universal Qualcomm drivers help all MTK devices to be detected by most of Qualcomm device repair applications on Windows PC, including all Qualcomm Flash Tool, Qualcomm Writer Tool, QPST Flash Tool.
Supported Software tools
These drivers are also compatible and supported all paid GSM box and dongle and other flashing and repair tools.
- Qualcomm Flash Tool
- Qualcomm Writer Tool
- Miracle Box
- MRT Key
- CM2 Qualcomm
- UMT Qualcomm
- Qualcomm FRP Tool
- Volcano Tool
- MCT Qualcomm Tool
- Piranha tool
- Infinity-Box and dongle
- Falcon Box
- Medusa Tool
- Qualcomm PC Suite
- Android Multi-Tool
- Samsung Flash Tool
Download Qualcomm USB Driver latest for Windows
Qualcomm USB Driver is fully compatible with all versions of Windows OS, including Windows XP, 7, 8 and also Windows 10 (32 or x64 bit architecture). In case if you are looking for the latest version of the Qualcomm Driver, then use the following below links to download it on your computer:
- Qualcomm Driver 32-bit [Windows]
- Qualcomm Driver 64-bit [Windows]
- All Qualcomm USB Driver – Official Site
Download: MTK USB All_Driver
How to Install Qualcomm USB Driver
Here we share with you three different methods to install Qualcomm USB Drivers on any Windows 32 and 64bit PC. The first method is an automatic method by simply using the setup wizard. This is the safest way to Install Qualcomm Drivers on your PC.
Automatic Installation
- Download Qualcomm drivers according to your PC’s OS (32-bit or 64-bit).
- Open the downloaded folder and extract the file.
- Then open the folder and double click to run the Setup.exe.
- You will get Installation Wizard Setup, click on the Next button there.
- Then Accept the Terms in the license agreement.
- Tap again on the Next button.
- Then click on the “Install‘ to install the Mediatek Driver drivers.
- Now, wait for a few seconds to complete the Installation.
- Once the driver installation is completed then click on the finish button to exit the Wizard.
- Done to install the Qualcomm Android USB Driver to your PC
- Well, If you need to Unlock FRP you recommended you to use FRP Bypass Tool For PC & FRP Bypass.
Download: QUALCOMM USB DRIVER
How to download and install Qualcomm HS-USB QDLoader 9008 Drivers.
Drivers can be install for modern versions of Windows 11, 10, 8.1, 8 and Windows 7 on x86 (32bit) and x64 (64bit) CPU architecture, please note there is no 32bit version of Windows 11 at the time of this writing. The guide assumes that you are an administrator or have elevated privileges on a Windows machine to install programs and drivers.
The purpose of these drivers is to connect a phone or tablet that has a Qualcomm chipset to a Windows based computer via USB. When connecting to a Windows based computer without these drivers you will be limited to MTP (Media File Protocol) functions which is probably fine for most users, however if you want to access EDL mode (Emergency Download) and other low level ADB shell commands then installing this driver is necessary.
Warning: There is always a chance of data loss and bricking a device completely when flashing customer ROM’s or performing functions at a low level, so please make sure you understand the risks before moving forward.
x64 (64bit) and x86 (32bit) Driver installation packages are below.
| File Name | Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip |
| Version | 1.0 |
| Download(s) | 1130561 |
| Size | 10.9 MB |
Description:
This package (Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip) contains Qualcomm HS-USB QDLoader 9008 Drivers for Windows 11/10/7/8/8.1 64-Bit OS. This Qualcomm QDLoader Driver helps in detecting the device when it is connected to PC in EDL Mode or Download Mode.
This Qualcomm HS-USB Driver package is for 64-bit OS, you can download the 32-bit version of the driver here. If you would like to install the drivers manually, download these Qualcomm Drivers.
Disclaimer: This file is completely free to use and distribute. All uploaded files and copyrights are properties of their respective owners. Read our DMCA and Copyright Policy.
One of the most important driver when flashing or restoring MIUI ROM is Qualcomm HS-USB QDLoader 9008. In post we’ll try to cover the installation process as detailed as possible as well as we will include all required download links.
Latest Version of Qualcomm HS-USB QDLoader 9008 Driver
As you already know the installed Qualcomm driver on your PC is required for identifying and then flashing your smartphone device. For example if you connect your Xiaomi device to PC and it isn’t identified, that basically means that your PC is missing the required driver.
The driver is available for different Windows OS versions including 7 & Windows 10.
There are two ways on how to install the Qualcomm HS-USB driver. First and easy way is to use the automatic installer and the second way is to install drivers manually. Let’s check both methods.
How to install automatically install HS-USB QDLoader 9008?
- Download archive with latest version of Qualcomm HS-USB QDLoader 9008 and unpack on your PC.
- QDLoaderHS_USB_Driver_64bit_Setup.exe
- QDLoaderHS_USB_Driver_32bit_Setup.exe
- You’ll find two different installers, one for 32bits and 64bits OS.
- Run the setup.
- If you’re using 32Bit OS, during setup select «Free Bld».
- Wait until installation is fully completed.
How to install manually install HS-USB QDLoader 9008 driver?
- Download the archive with required drivers.
- Download and install ADB & Fastboot drivers.
- Confirm on open. Press “Next” and wait until installation is completed.
- Enable USB debugging on your Android device.
- Open “Settings” > “Developer Settings” > “USB Debugging”.
- Connect your device via USB cable to PC.
- Now you need to boot your phone in EDL (Download mode).
- Open terminal window as Administrator.
- And type the following commands one by one:
- adb devices
- adb reboot edl
- Open “Device Manager” on your PC and look for “QHSUSB_BULK” unknown device.
- Right mouse click and select “Update Driver”.
- Select “Locate Drivers on this Device”.
- Now find the previously downloaded Qualcomm QDLoader driver package and select it.
- Confirm driver installation.
- If everything was done correctly you’ll see your device correctly identified in device manager.
After drivers are successfully installed you can proceed with further manipulations with your phone.
Table of Contents
Qualcomm HS-USB QDLoader 9008 Driver:
The Qualcomm HS-USB QDLoader 9008 Driver is an application that is essential for restoring the functionality of your USB device. If you don’t have the driver for your USB device installed on your computer, you should download it. This is a free download and it can be used by your computer to restore the USB connection to your smartphone. In order to use the driver, you need to have the Qualcomm HS-USB QDLower 9008 on your PC.
The driver is compatible with 32-bit/64-bit versions:
The Qualcomm HS-USB QDLoader 9008 Driver is compatible with 32-bit and 64-bit Android devices. Once you download the driver, simply connect your Android device to your PC and wait a few seconds. If the installation is successful, you should see a message saying that the USB connection is now active. To continue, you must uninstall the old driver and install the new one.
Uninstall the older version of Qualcomm Driver:
If you’ve installed the old driver, it should automatically install on your Windows PC. If you’re using Windows, make sure to enable USB debugging on your device, then connect it to your PC and boot it in EDL mode. If you’re using Windows, open a terminal window as an administrator and look for the unknown device ‘QHSUSB_BULK’. Then, click on “Update Driver” or “Locate Drivers on This Device”. If the installation is successful, you’ll see the success message.
Install the latest Qualcomm HS-USB QDLoader 9008 Driver:
If you’re installing the Qualcomm HS-USB QDLoader Driver manually, there are a few things you need to do first. The driver package doesn’t include executable files. Then, you can manually install it. To unbrick it, locate the Qualcomm QDLoader Driver Package in your device folder. Then, click on “Install” on the following screen.
The installation process of the Qualcomm HS-USB QDLoader 9008 Driver:
To install the Qualcomm HS-USB QDLoader 9008 Driver on your PC, follow the steps below. To install it, go to the device’s Device Manager and search for “QHUSB_BULK” in the search box. Then, double-click on the USB drive and click the Update Driver software to complete the installation. When the driver installation is complete, you’ll see the new device in the ‘updated driver software’ section of the window.
Downloading and the complete installation Process:
The Qualcomm HS-USB QDLoader 9008 is a USB device. The device is located in COM 10 and PORT. Once you’ve downloaded the Qualcomm HS-USB QDLoader 9008 Driver, you’ll be able to install it on your computer. It’s important to note that you’ll need to be connected to your PC via a USB cable.
Connect the Qualcomm Support Devices:
In addition to flashing MIUI ROM, this driver will also enable you to unbrick your device and reinstall any software you’ve previously installed. In order to install the driver, you’ll need to enable USB debugging. Select the appropriate option and press enter to allow the file to run on your PC. The Qualcomm HS-USB QDLoader 9008 Driver is required for these purposes.
Installing the driver on Windows 7, 8.1, and Windows 10:
You can install the Qualcomm HS-USB QDLoader 9008 driver on Windows 10, 8.1, or 7 by using a free download. Once you’ve downloaded the driver, you need to run it as an administrator to enable the USB debugging feature on your device. If you’ve installed the driver, you should be able to flash stock firmware on your phone.
Once the installation Process Completes:
After installing the Qualcomm HS-USB QDLoader 9008 Driver, you need to ensure that the drivers are installed on your PC. You can do this by updating the driver with the device manager. If you’ve installed the Qualcomm HS-USB QDLoader on your PC, you should see it listed in the device manager. You can install the latest version of the driver package from here.
Setup the connectivity Procedure on Windows 32-bit and 64-bit versions:
The driver installer will let you choose between the 32bit and 64bit versions of the system. You can choose the 32-bit version if you’re running a 32-bit OS. In the 64-bit version, select the Free Bld option when prompted. After you’ve downloaded the Qualcomm HS-USB driver, you need to install the software. The driver installation should take only a few minutes.