Samsung usb driver for mobile phones не устанавливается windows 7

Информация о файле	Описание
Размер файла:	8.2 MB
Дата и время изменения файла:	2020:01:24 06:37:12+00:00
Тип файла:	Win32 EXE
Тип MIME:	application/octet-stream
Тип компьютера:	Intel 386 or later, and compatibles
Метка времени:	2009:12:05 22:50:41+00:00
Тип PE:	PE32
Версия компоновщика:	6.0
Размер кода:	23040
Размер инициализированных данных:	119808
Размер неинициализированных данных:	1024
Точка входа:	0x30cb
Версия ОС:	4.0
Версия образа:	6.0
Версия подсистемы:	4.0
Подсистема:	Windows GUI
Номер версии файла:	1.5.29.0
Номер версии продукта:	1.5.29.0
Маска флагов файлов:	0x0000
Флаги файлов:	(none)
Файловая ОС:	Win32
Тип объектного файла:	Executable application
Подтип файла:	0
Код языка:	Neutral
Набор символов:	Windows, Latin1
Наименование компании:	SAMSUNG Electronics Co., Ltd.
Описание файла:	SAMSUNG USB Driver for Mobile Phones
Версия файла:	1.5.29.0
Внутреннее имя:	SAMSUNG USB Driver for Mobile Phones
Авторское право:	SAMSUNG Electronics Co., Ltd. All Rights Reserved
Название продукта:	SAMSUNG USB Driver for Mobile Phones
Комментарии:	SAMSUNG USB Driver for Mobile Phones

^✻ Фрагменты данных файлов предоставлены участником Exiftool (Phil Harvey) и распространяются под лицензией Perl Artistic.

The [Solved] Samsung USB Driver not installing is explained. There could be one of two problems when the USB driver is not doing what it should be doing. The first part is hardware and the second part is software. If neither of them work then you are going to have to take your phone in to be seen too.

Samsung Driver Solution 1:

The first and most common problems can be that the USB socket of the computer is no longer working properly as the center piece in the USB port is bent. This is a common problem as inserting and removing USB connectors does bend the middle of the USB port. See if it is still straight.

You can see from this picture what it is that I am talking about. That centre piece of the USB port does bend upwards or sideways as you pull out the USB adapter each time. Very common problem when you are using the front ports of your computer. See also the Samsung USB driver on here as well as the Samsung Syncmaster 2233rz as well.

Samsung Driver Solution 2:

The next problem tends to be a motherboard problem. Some computers will not run the USB port from the front sockets of the computer. As an example My Dell Computer does not allow me to access my Iphone from the front sockets without loads of problems. Sticking it into the rear USB ports always works without an issue. You might have the same problem.

Samsung Driver Solution 3:

Corrupt software can also present a problem. This will show in the Device Manager of you computer. The easiest way to get there is to:

• Click on the Start menu and type devmgmt.msc then hit Enter

The following screen will come up. If there is an error then it will show that there is a USB problem and the driver will be the issue. If there is no problem you will get a screen as I have at the bottom. See the Samsung USB Driver on the other page.

Nothing wrong there however if you had a problem then you would see the following screen.

What you need to do when you see this error is to “Right-Click” on the device and then click “Uninstall”. Ensure that you phone has been disconnected and also remove all other USB devices in the ports.

You now need to reboot the computer. Once back now install the Samsung USB driver or the Samsung Android Driver and let the device install the software on its own. This would normally solve the issue most times.

Samsung Driver Solution 4:

There may be an MTP-USB driver failure. As before get in to the Device Manager and from there see if you have any errors showing such as that listed below where it shows an MTP error.

If you have one of these errors then “Right-Click” on the MTP Device and Click on “Update Software” and then browse to where you had downloaded the driver too. It will then update the MTP driver to the latest one you had downloaded. This would solve the issue.

Samsung Driver Solution 5:

This is common with the Samsung being mainly the Galaxy phone. The OS I am using is in English so if you have a Spanish system then the command will be in Spanish. Click on [start] and at the bottom type in CMD which will bring the OS with the DOS command up. copy and past this in the command line:

net localgroup Administrators local service /add

That will put most MTP and Driver issues to bed right there. Find the equivalent in your language if the operating system is not in English. If this has not worked then try the next solution as one of them is going to fix it. This solves most of the Samsung USB driver not installing issues.

Samsung Driver Solution 6:

The next solutions that has worked for some was to unmount and remove the SD Card from the phone and then connecting the phone without the card. Once connected and recognised unplug the phone and turn it off. Insert the SD Card again and turn on the phone. Normally this will bring the phone back to normal for some users.

Samsung Driver Solution 7:

• Click Start, right-click on Computer and select Properties.
• Go to Device Manager.
• Click on View and click on Show Hidden devices.
• Navigate to Universal Bus Controllers“
• Right-click on it and choose “Uninstall” for all the USB devices listed there.
• After the un-installation, click “Action – Scan for hardware changes”.
• Install the device again.
• Reboot the computer and see how it works.

Those are the 7 solutions for the USB and MTP problems with the Samsung phones. If they do not work then the solutions are more difficult to find. Check your cables and ensure that work and also dont connect to the USB hub and they can also create problems. Most people have fixed the phone with one of these solutions. This is the Samsung usb driver not installing article and not the same as the Samsung ml 1915 driver.

Incoming Search Terms:

• samsung driver is not installing
• how to install samsung usb driver in windows 7
• samsung drivers not installing
• samsung usb driver not working

These are instructions on how to install the Samsung USB Driver on Windows Computer, which helps you connect Samsung Smartphones and Tablets to the Computer.

Requirements: You need to have a Windows Computer (x32 or x64 bit) to install the Samsung Drivers on the Computer.

Steps to Install Samsung USB Driver on Windows

1. Download and Extract the Samsung Driver on the Computer. If in case you have already downloaded the Samsung Drivers, then SKIP this step.



2. After extracting the Driver Package, you will be able to see the similar files:



3. Open the Setup File.



4. Click on Next Button to Continue.



5. Now, Select your Choice of Language and your country (you can ignore it) and Click on Next Button to Continue.



6. Choose the Installation Location (leave it as default) and Click on Install Button.



7. Now, Installation will be completed within a minute.



8. Once Installation is Completed, Click on Finish Button to Close the Setup.



9. Now, Restart your Windows Computer to apply changes. After Restarting the Computer, you can easily connect your Samsung Smartphone and Tablets to the Windows Computer.