Время выполнения заказа:
| Quantity (шт.) | 1 — 30 | > 30 |
| Примерное время (в днях) | 10 | Подлежит согласованию |
Изготовление на заказ:
Индивидуализированная упаковка(Мин. заказ 100000 шт.)
Сведения о покупке
Защита с помощью
Транспортировка:
Связаться с поставщиком для согласования деталей доставки
Для вас Гарантия своевременной отправки
Платежи:
Шифрование и повышенная безопасность платежей Подробнее
Возврат товаров и возмещение средств
Право на возврат в течение 30 дней с момента получения товаров. Подробнее
Introduction
PLDT Home Fibr’s router AN5506-04 uses two different accounts for setting the router’s configurations, the “admin” account and the “adminpldt” account. This post includes information on how to enable the admin account of PLDT Home Fibr router AN5066-04.
The “admin” account in the PLDT Home Fibr router is actually NOT an admin account in the real sense of the word. On other routers, it is called a “user” account. The reason is, this account has a very limited scope in making configuration changes to the router. The only thing you can do with this “admin” account, besides changing the current password, is changing the SSID name of the wireless LAN and its corresponding passphrase. It is too limited in scope so that even the very basic procedure of changing the router’s IP address in order to make it work on the existing network infrastructure is not available.
The “adminpldt” account is the real admin account. It gives you full access to virtually all of the router’s configuration settings, including settings that could possibly break the router’s proper operation. This is the reason why the “adminpldt” account is disabled by default.
See the video, How to Enable PLDT Admin Account on Home Fibr Router AN5506-04.
Factory Defaults
The router is set to factory defaults by pressing down the reset switch at the back of the router. After a successful factory reset, the router’s administration page (“admin” account) is accessible at IP address 192.168.1.1.
|
IP Address: 192.168.1.1 Default Username: admin Default Password: 1234 |
The default wireless LAN SSID’s and their corresponding default passwords are stamped at the back of the router.
|
Default SSID (2.4Ghz): PLDTHOMEFIBR3b228 Default WLAN Passphrase (2.4Ghz): PLDTWIFIs5CFe Default SSID (5Ghz): PLDTHOMEFIBR5G3b228 Default WLAN Passphrase: PLDTWIFIs5CFe |
Below is the “admin” account showing the available settings.
How to Enable the Admin Account on PLDT Home Fibr
Step 1 – Login as SuperAdmin
The real admin account that gives you access to all the configurations available on the router is the “adminpldt” account. The problem is, by default, the webpage for the account is disabled. To make things worse, PLDT keeps on changing the admin password for this account.
To enable the “adminpldt” webpage, first, you have to login to a different webpage, not the usual 192.168.1.1. The location is https://192.168.1.1/fh.
|
Username: f~i!b@e#r$h%o^m*esuperadmin Password: s(f)u_h+g|u |
Step 2 – Enable Web Admin Switch
Enable “Web Admin Switch” and click the “Apply” button. Then click “Logout”
Step 3 – Login with the “adminpldt” Account
|
Username: adminpldt Password: z6dUABtl270qRxt7a2uGTiw |
UPDATE: As of 09 October 2019, the SuperAdmin username and password has been changed. Also, the “adminpldt” account’s password is already new.
|
SuperAdmin Account Username: f~i!b@e#r$h%o^m*esuperadmin Password: s(f)u_h+g|u |
|
adminpldt Account Username: adminpldt Password: z6dUABtl270qRxt7a2uGTiw |
Related Video: Default Username and Password of PLDT Routers
How to Configure a PLDT Router
Configure a PLDT router using the admin account named “adminpldt” to get a full and complete access to all of the router’s configuration options.
How to Configure a PLDT Router with Admin Account
Configure a PLDT router using the user account “admin”. This account can only configure the wireless networks (WiFi).
Default Username and Password of PLDT Routers 2019
The latest update on the list of default username and password of PLDT routers.
Default Password of PLDT Routers 2019 Compilation
An updated list of default password of PLDT routers including old, archived passwords used for a period of time in the past.
Default Password of PLDT Router AN5506-04
Default password for PLDT router model AN5506-04 but information included here may apply to other PLDT router models.
How to Reset PLDT Router to Defaults
Perform a hardware reset or reset your PLDT router to its original, default factory configuration.
How to Change the IP Address of PLDT Routers
To use a PLDT router on an existing network, there is sometimes a need to change the PLDT router’s IP Address.
How to Change the Wifi Names of PLDT Routers
The default wireless LAN names or WIFI names of PLDT routers are quite long. And so are their default passwords, making it cumbersome to type in.
References on Enable Admin Account on PLDT Fibr Router AN5506-04
PLDT Home Fibr
Specifications:1884/1884817-an550604_series.pdf file (04 May 2023) |
Accompanying Data:
FiberHome AN5506-04 Series Network Hardware, Network Router PDF Product Manual (Updated: Thursday 4th of May 2023 09:15:24 AM)
Rating: 4.8 (rated by 25 users)
Compatible devices: AN6000-15, HG110, AN5506-04-F, CiTRANS R820, AN5116-06B, AN6000-17, AN6000-7, AN5516-04.
Recommended Documentation:
Product Manual (Text Version):
(Ocr-Read Summary of Contents of some pages of the FiberHome AN5506-04 Series Document (Main Content), UPD: 04 May 2023)
-
63, 3 Product Overview Indicator LED Description See Table 3.24 for the description of indicator LEDs on the AN5506- 04-GG. T able 3.24 Description of Indicator LEDs on the AN5506-04-GG Indicator LED Meaning Color Status Status Description Power Power status indicator LED Green ON The device is powered on. OFF The device is not powered on. PON Register status indicator LED Green ON The ONU is ac…
-
25, 3 Product Overview T able 3.9 Description of Indicator LEDs on the AN5506-04-CG (Continued) Indicator LED Meaning Color Status Status Description LAN1 to LAN4 Ethernet interface status indicator LED Green ON The interface is connected to the user terminal and no data is transmitted. Blinking The interface is transmitting / receiving data. OFF The interface is not connected to the user termin…
-
127, 4 Web Configuration Guide 4.6.1.2 Maintenance Account Management Users can modify the username and password of the current account. 1. Select Management in the navigation bar. Select Account Management→Maintenance Account from the left link bar to open the maintenance account management tab, as shown in Figure 4.45. Figure 4.45 Maintenance Account Management 2 . Modify the us…
-
16, 3 Product Overview T able 3.4 Technical Parameters of the AN5506-04-B (Continued) Type Item Description Supports the speech encoding modes such as G.711, G.723 and G.729. VLAN Supports the IEEE 802.1Q VLAN standard. Supports joining 802.1Q VLAN in tag / untag mode. Supports up to 4095 VLANs. Multicast Supports the IGMP Snooping protocol. Supports IGMP v1/v2/v3. Wire-speed forwardin…
-
39, FiberHome AN5506-04 Series 3 Product Overview T able 3.15 Description of Indicator LEDs on the AN5506-04-F (Continued) Indicator LED Meaning Color Status Status Description PON Register status indicator LED Green ON The ONU is activated. OFF Activation of the ONU is not yet started. LOS Optical signal status indicator LED Red Blinking The device has not received the optical signal. OFF The device has rece…
-
41, 3 Product Overview Appearance The overall appearance of the AN5506-04-FG is shown in Figure 3.14. Figure 3.14 Overall Appearance of the AN5506-04-FG The rear panel of the AN5506-04-FG is shown in Figure 3.15. 35
… -
31, FiberHome AN5506-04 Series 3 Product Overview T able 3.11 Specifications of the AN5506-04-DG (Continued) Type Item Description Power supply parameters DC DC 12 V/1.5A Power consumption parameters — ＜10W Environment parameters Operating temperature -5℃ to 45℃ Storage temperature -40℃ to 70℃ Environmental humidity 10% to 90% (no condensation). Indicator LED Description See Table 3.12 for th…
-
58, 3 Product Overview The rear panel of the AN5506-04-GG is shown in Figure 3.21. Figure 3.21 Rear Panel of the AN5506-04-GG The side panel of the AN5506-04-GG is shown in Figure 3.22. 52
… -
59, 3 Product Overview Figure 3.22 Side Panel of the AN5506-04-GG Equipment Specifications The AN5506-04-GG specifications include technical parameters and specifications. See Table 3.22 for the technical parameters and see Table 3.23 for the specifications. T able 3.22 Technical Parameters of the AN5506-04-GG Type Item Description Service parame- ters Voice Supports the protocols H.248 and…
-
65, 3 Product Overview T able 3.24 Description of Indicator LEDs on the AN5506-04-GG (Continued) Indicator LED Meaning Color Status Status Description OFF WPS is not enabled or not connected to device. 59
… -
98, 4 Web Configuration Guide 4.4.1.2 IP Filtering Allow or forbid the incoming or outgoing flow of the IP packets that comply with the filtering conditions. After the firewall is enabled, the pre-set rules will take effect. 1. Select Security in the navigation bar and select Firewall→IP Filtering in the left link bar. Click Add to open the filtering rule list configuration tab, as sho…
-
94, 4 Web Configuration Guide T able 4.8 Parameters for TR-069 Configuration (Continued) Item Description Connection Request Authentication Enables or disables the user authentication when the ACS sends the connection request to the ONU. Connection Request Username Authentication username of the ACS sending the connection request to the ONU. Connection Request Password Authentication passwor…
-
FiberHome AN5506-04 Series User Manual
-
FiberHome AN5506-04 Series User Guide
-
FiberHome AN5506-04 Series PDF Manual
-
FiberHome AN5506-04 Series Owner’s Manuals
Recommended:
DC220/05, CLP-610ND, TILT AND SWING WALL MOUNT — PROGRAMMING, TW1510
Operating Impressions, Questions and Answers:
AN5506-04-FG, 4GE+2POTS+WIFI GPON SFUAsterisk/Elastix H.248/SIP/MGCP 32 FXS/FXO VoIP Gateway/IAD
- Product Overview
- Features
- Technical Parameters
- Application Diagram
AN5506-04-GG is one of remote ONU in Fiberhome FTTX system. It can provide 1 port of GPON uplink to docking with OLT in local. And also provide 4 ports of 10/100M Base-TX, 2 ports of RJ11, Wi-Fi and 1 CATV port. AN5506-04-GG must connect to AN5x16 Series OLT in GPON system. The entire system can provide data, VoIP and video for subscribers.
● Provide Ethernet/Wi-Fi/USB/VoIP/CATV interface to match different access request from users.
● Build in Wi-Fi function, comply to 802.11b/g/n.
● High Service discovers and control function. It can indentify different kind f service base on equipment and provide prior control to end user.
● 4 LAN(10/100/1000M BASE-TX) port, Wi-Fi,1 CATV port and 2 RJ11 ports, support max 4 SSID(hide),Support WEP and WPA/WPA2 security protocols.
● Support PPPoE+;STP/RSTP
● Support IEEE802.1Q VLAN; QoS
● Support IGMP Snooping, IGMP Proxy
● Call protocol: SIP (IMS compatible), seamless compatible with all popular call agent
● Voice coding: ITU-T G.711/G.723.1(5.3K/6.3Kbit/s)/G.729, auto-negotiate with call agent.
● Physical Dimension :37×211×174MM (H×L×D)
● Power: DC 12V with AC 220V adapter
● Power Consumption: lower than 5W
● Working Temperature: -10～55℃
● Storage Temperature: -30～60℃
● Relative Humidity: 10～90% (Non Condensation)
● Weight: 950g.
Адрес:
11C Guangye Building Fuhua Road 110, Futian District, Shenzhen, Guangdong, China
Тип Бизнеса:
Торговая Компания
Диапазон Бизнеса:
Бытовая Электроника, Компьютерные Товары, Промышленное Оборудование и Компоненты, Электричество и Электроника
Введение Компании:
Мы являемся профессиональным поставщиком, который предоставляет оборудование GPON ONU, EPON ONU и OLT, модемы, маршрутизаторы и другие компьютерные продукты с высочайшим качеством и конкурентоспособными ценами. Наши быстрые ответы и отличная поддержка клиентов позволяют вам более удовлетвориться.
Once receive your question, the supplier will answer you as soon as possible.