Xiaomi Redmi Note 10S USB Driver allows you to connect your Xiaomi Smartphone to the Windows Computer without installing the Xiaomi PC Suite Application. The Xiaomi Redmi Note 10S Driver can be helpful if you’re trying to transfer your files from the Mobile to the Computer or from the Computer to the Xiaomi Device.
You can also use it during the Firmware (OS) Flashing or Installing process on the device or fixing any Software-related issues.
Xiaomi Redmi Note 10S Driver for Windows
Xiaomi USB Driver allows you to connect your Xiaomi Smartphone and Tablets to the Windows Computer and transfer data between the Computer and the Xiaomi device. Apart from this, it also allows you to sync data between the device and the Computer, back up your existing data on the Computer or restore the data on the Xiaomi device.
There are several circumstances when you might need to install the Xiaomi driver to connect the computer. They are:
- Transfer data from the Xiaomi device to the Computer or from the computer to the device.
- To free up the device space.
- To install the Stock Firmware (OS) on the device.
- To Write/Flash IMEI on the Device.
Download Xiaomi Redmi Note 10S Driver
Xiaomi Redmi Note 10S Smartphone is powered by Mediatek Helio G95 Chipset. Therefore, you have to install the Mediatek USB Driver and the ADB Driver to connect the Smartphone to the Computer.
| For Windows (32-64 Bit) |
||
| Driver | Size | Download |
| MediaTek Driver | 8.84 MB | Driver |
| ADB Driver | 8.27 MB | Driver |
Frequently Asked Questions
What is Xiaomi Redmi Note 10S USB Driver?
The Xiaomi Redmi Note 10S USB Driver is a free software primarily used to install the Xiaomi Drivers on the Windows Computer with a few clicks.
How do I install the Xiaomi Redmi Note 10S Mediatek Driver?
You can install the Xiaomi Redmi Note 10S Mediatek USB Driver by downloading the zip file and installing the driver on the Computer. The installation process is quite similar to the standard Windows Application. You can follow the How to install the Mediatek Driver page to install the drivers correctly.
How do I install the Xiaomi Redmi Note 10S ADB Driver?
You can install the Xiaomi Redmi Note 10S ADB Driver by downloading and extracting the driver on the Computer. Then Open the Device Manager and Locate the ADB Drivers to Install it. Finally, you can follow the How to install the ADB Driver page to install the drivers correctly.
Is Xiaomi Redmi Note 10S USB Driver Free?
Yes. The Xiaomi Redmi Note 10S USB Driver is 100% free since the Xiaomi community officially releases it for Xiaomi Mobile users.
Is Xiaomi Redmi Note 10S USB Driver Safe?
Yes. The Xiaomi Redmi Note 10S USB Driver is 100% safe for the Computer, laptop, and Xiaomi device. Furthermore, since the Xiaomi community officially releases the driver, it’s 100% safe & secure to use on the Computer.
Where Can I find Xiaomi Redmi Note 10S Firmware?
If you are looking for the original Xiaomi Redmi Note 10S Firmware (Stock ROM), then head over to the Xiaomi Redmi Note 10S Firmware page.
On this page, we have managed to share the official USB driver of the Xiaomi Redmi Note 10S Device. If you were already searching for the USB driver of the device, then this page will help you out.
There are 2 USB drivers available for the device, i.e., Mediatek Driver and ADB Driver. The Mediatek Driver is compatible with all the Mediatek Flash Tool, and the ADB Driver can be useful for establishing a connection between the mobile and the computer.
Xiaomi Redmi Note 10S Mediatek Driver
The Mediatek Driver is compatible with the SP Flash Tool, MTK Flash Tool, SP MDT Tool, and the SN Write Tool and can be helpful if you are trying to install firmware (ROM) on the device.
Driver Name: Mediatek Driver
Package Name: Mediatek_Driver_Auto_Installer_v1.1352.zip
Driver Size: 10 MB
How to Install: Follow Guidelines
Get Driver
Xiaomi Redmi Note 10S ADB Driver
You can use the ADB Driver to connect the mobile (powered by android) to the computer and transfer data between the mobile and the computer.
Driver Name: Android ADB Driver
Package Name: usb_driver_r13-windows.zip
Driver Size: 8.27 MB
How to Install: Follow Guidelines
Get Driver
How to Install any USB Driver Manually
- Download and extract the USB driver on the computer.
- Open Device Manager (devmgmt.msc) and Click on the Computer Name > Action Menu > Add Legacy Hardware.
- Click on the Next button.
- Select the Install the hardware that I manually Select from a list checkbox and Click on the Next button.
- Again, Click on the Next button.
- Click on the Have Disk > Browse > Locate the .inf file (found in the extracted driver folder) and Click on Open Button.
- Click on the Finish button to complete the installation.
Follow Complete Guidelines
Readme Once:
[*] Driver Signature Error: If you are facing Driver Signature Error while installing the USB Driver, then head over to How to Fix Driver Signature Error page.
[*] Driver Easy: We recommend you to use Driver Easy application to update all the computer drivers in a Single Click.
[*] Stock Firmware: If you are looking for the Xiaomi Redmi Note 10S Stock Firmware, then head over to the Xiaomi Firmware page.
Xiaomi Redmi Note 10S phone not connecting to PC only charging? Computer having trouble detecting the Xiaomi Redmi Note 10S Android phone? It may be caused by the missing Xiaomi Redmi Note 10S USB Driver or corrupted drivers. To fix Xiaomi Redmi Note 10S phone not showing up on PC, download Xiaomi Redmi Note 10S USB Drivers and install them on your computer.
Xiaomi USB Drivers are essential to seamlessly connect Xiaomi Redmi Note 10S to a Computer or Laptop over USB. Without the Xiaomi Redmi Note 10S drivers, the connection will not work, and your computer will have a hard time detecting your phone. On this page, you can download official Xiaomi Redmi Note 10S USB Drivers for Windows 11, Windows 10, Windows 7, Windows 8.1, and Windows 8, along with Xiaomi Redmi Note 10S ADB interface drivers and Fastboot drivers.
The Xiaomi Redmi Note 10S Android USB Drivers allows you to establish a secure and reliable connection between your phone and the computer over the USB connection. It will enable you to connect your phone as an MTP USB device (Media Transfer Protocol) and transfer files and data like images, videos, and documents between your phone and the computer.
The Xiaomi Redmi Note 10S ADB Driver and Fastboot Driver allows you to pass ADB commands and Fastboot commands right from your computer and perform certain operations on your phone.
The Xiaomi Mobile Drivers provided here allow you to flash stock firmware, stock recovery, TWRP recovery, CWM recovery, Unlock Bootloader, etc. It also allows you to transfer media, documents, and other files to and from your phone to your computer.
Xiaomi Redmi Note 10S Driver for Flashing Firmware
Download Now
How to install: Follow Tutorial
Xiaomi Redmi Note 10S USB Driver for normal connecting to PC
Download Now
How to install: Follow Tutorial
The Xiaomi Redmi Note 10S Fastboot and ADB drivers can be downloaded below.
Xiaomi Redmi Note 10S ADB and Fastboot Drivers
Download Now
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Xiaomi Redmi Note 10 5G USB Drivers
How to Install Xiaomi Redmi Note 10S USB Drivers
- Download the Xiaomi Mi USB Driver zip package on your computer and extract it on Desktop.
- Open the Device Manager on your computer by searching device manager from Windows Start Menu.
- Now click on your Computer name in the Device Manager window.
- Now click on Action and then select Add legacy hardware.
- Add Hardware Wizard window should open, click on Next to continue.
- Now select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Select Show All Devices from the list and click on Next.
- On the next screen, click on Have Disk… to open the Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the Xiaomi Mi driver package in Step #1.
- Now, select the Xiaomi Drivers android_winusb.inf file and click on Open and then on OK.
- Select the Android ADB Interface Driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the Xiaomi USB Driver installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
How to Install Xiaomi Redmi Note 10S USB Drivers Manually
- Download and extract the latest_usb_driver_windows.zip package on your computer.
- Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window opens, click on your Computer name.
- Now click on Action and then on Add legacy hardware.
- Now Add Hardware Wizard window should pop-up. Click on Next to continue.
- In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to open the Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
Video Tutorial: How to Install Xiaomi Redmi Note 10S Android USB Drivers
Subscribe to Android USB Drivers
How to Install Xiaomi Redmi Note 10S ADB and Fastboot Drivers
- Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.
- Now right click on the adb driver installer setup file and click on Run as administrator.
- Now you’ll see a command prompt window with a blue background and white text.
- It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
- Now, the ADB and Fastboot installation process should begin.
- When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
- Now the «Device Driver Installation Wizard» window should open.
- Click on Next to continue installing the Google USB Drivers (WinUSB).
- Once installed, click on Finish and restart your computer.
Video Tutorial: How to Install Xiaomi Redmi Note 10S ADB and Fastboot Drivers
Subscribe to Android USB Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
Reader Interactions
Xiaomi Redmi Note 10S USB Driver for Windows 10, Windows 8.1, Windows 8, Windows 7 Download – Xiaomi Redmi Note 10S USB Driver is software that creates a stable connection between the computer’s operating system and the Xiaomi Android Phones. The USB Driver for Xiaomi Redmi Note 10S is an essential component. Without that, the connection will not work correctly when you were developing your phone.
If you are trying to develop your Xiaomi Redmi Note 10S with a PC or laptop, the first thing you need is the Official USB Driver for Xiaomi Redmi Note 10S. Here, We offer the Xiaomi Redmi Note 10S USB Driver for Windows 7/8/10 with a proper installation guide. It is effortless to download the Xiaomi Redmi Note 10S USB driver, click the “Download Link” below.
With Xiaomi Redmi Note 10S USB driver installed on a Windows PC, you can do various advanced features on your device. Including firmware update, firmware downgrade, or flashing stock ROM a.k.a reinstall your Xiaomi Android Smartphone operating system. Meanwhile, if you want to connect the phone to use the Official Xiaomi Redmi Note 10S PC Suite, you only need the Official Xiaomi Redmi Note 10S ADB Driver.
Xiaomi Redmi Note 10S USB Driver OS Compatibility
Xiaomi Redmi Note 10S USB Driver is compatible with different versions of Windows. Such as Windows 10 (32-bit), Windows 10 (64-bit), Windows 8.1 (32-bit), Windows 8.1 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 7 (32-bit), Windows 7 (64-bit), Windows Vista (32-bit), Windows Vista (64-bit), and Windows XP (32-bit).
Xiaomi Redmi Note 10S USB Driver Installation Instructions for Windows 10, 8, 7
To install the Xiaomi Redmi Note 10S USB Driver for Windows for the first time, do the following:
- First, download the USB driver for Xiaomi Redmi Note 10S from the Download link section and save them in a folder where the file is easy to find.
- Locate the file, select it directly in your driver file.
- Extract the downloaded file.
- Wait until the extraction process is complete.
- Double click on the .exe file.
- Install the driver.
- Select Run if a security warning appears on the screen of your laptop / PC and clicks Yes.
- You will then be asked to select the language, select the English language, and select Next.
- Wait for the complete installation process.
- Xiaomi Redmi Note 10S USB driver for Windows 10, Windows 8.1, Windows 8, Windows 7 were installed correctly.
Once the correct USB driver for Xiaomi Redmi Note 10S is installed correctly, you can use Android tools and utilities, such as the Xiaomi PC Suite software (link above in the third paragraph) or Moborobo Android PC Suite, which allows you to manage all types of Android devices On your computer.
That’s all the tutorial on how to install the Xiaomi Redmi Note 10S USB driver for the Windows procedure. If there is a problem or an error, you can keep in touch with us through the Contact menu at the bottom of this page. Support us and share it with anyone who needs it so we can continue to support you.
However, before continuing, let me differentiate between a USB driver and an ADB driver. In simple terms, a USB driver is used to flash the stock firmware on your Xiaomi smartphone, while an ADB driver is used to connect your phone to a computer. A USB driver is required when trying to flash a custom ROM when trying to root or update a new firmware on your Smartphone. On the other hand, ADB Driver (Android Debug Bridge Driver) can control your device via USB using a computer. You can copy and return files, install and uninstall applications, execute shell commands, and solve multiple problems.
Xiaomi Redmi Note 10S USB Driver DownloadXiaomi Redmi Note 10S User Guide PDF Download
Xiaomi Redmi Note 10S USB Driver for Windows Download
Xiaomi Redmi Note 10S USB Driver Download for Windows 10, Windows 8.1, Windows 8, Windows 7 (32/64-bit)
Download
Xiaomi Redmi Note 10S User Guide PDF
Download
The drivers to connect/unlock the Xiaomi Redmi Note 10S smart phone to backup,tether, network and more are below. Be aware if you are looking to unlock the bootloader or other advanced software functions it most likely will void any existing warranty. Also Functions used at the fastboot screen can wipe the phones data, be sure to have a full backup before conducting any technical procedures. Look at the specs on this page, if your device uses Mediatek chipset use MTK Drivers, if your device has a Qualcomm chipset then use Qualcomm drivers.
Basic Specs:
Display: Type: IPS LCD, 90Hz, 400 nits (typ)
Size: 6.5 inches, 102.0 cm2 (~83.7% screen-to-body ratio)
Resolution: 1080 x 2400 pixels, 20:9 ratio (~405 ppi density)
Protection: Corning Gorilla Glass 3
Platform: OS: Android 11, MIUI 12
Full Specs/Additional configurations
Show: Full Specs/Additional configurations
Body: Dimensions: 161.8 x 75.3 x 8.9 mm (6.37 x 2.96 x 0.35 in)
Weight: 190 g (6.70 oz)
SIM: Dual SIM (Nano-SIM, dual stand-by)
Display: Type: IPS LCD, 90Hz, 400 nits (typ)
Size: 6.5 inches, 102.0 cm2 (~83.7% screen-to-body ratio)
Resolution: 1080 x 2400 pixels, 20:9 ratio (~405 ppi density)
Protection: Corning Gorilla Glass 3
Platform: OS: Android 11, MIUI 12
Chipset: MediaTek MT6833 Dimensity 700 5G (7 nm)
CPU: Octa-core (2×2.2 GHz Cortex-A76 & 6×2.0 GHz Cortex-A55)
GPU: Mali-G57 MC2
Memory: Card slot: microSDXC (dedicated slot)
Internal: 64GB 4GB RAM, 128GB 4GB RAM, 128GB 6GB RAM
: UFS 2.2
Main Camera: Triple: 48 MP, f/1.8, 26mm (wide), 1/2.0″, 0.8µm, PDAF
2 MP, f/2.4, (macro)
2 MP, f/2.4, (depth)
Features: Dual-LED dual-tone flash, HDR, panorama
Video: 1080p@30fps
Selfie camera: Single: 8 MP, f/2.0, (wide)
Video: 1080p@30fps
Sound: Loudspeaker: Yes
3.5mm jack: Yes
: 24-bit/192kHz audio
Comms: WLAN: Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot
Bluetooth: 5.1, A2DP, LE
GPS: Yes, with A-GPS, GLONASS, GALILEO, BDS
NFC: Yes (market/region dependent)
Infrared port: Yes
Radio: No
USB: USB Type-C 2.0
Features: Sensors: Fingerprint (side-mounted), accelerometer, gyro, proximity, compass
Battery: Type: Li-Po 5000 mAh, non-removable
Charging: Fast charging 18W
Install Instructions
Step 1 — Download and extract the Android USB Driver to your PC.
Step 2 — Click Start (Windows) -> Control Panel -> Device Manager (Select Device Manager).
Step 3 — On the Device Manager window find and click on computer name to select Add legacy hardware.
Step 4 — Select Next
Step 5 — Selext Install the hardware that I manually select from a list (Advanced), and click the Next
Step 6 — Select Show All Devices afterward click Next button again.
Step 7 — Click the Have Disk button.
Step 8 — Click Browse button to find the extracted Android ADB Driver -> android_winusb.inf and click on Open.
Step 9 — Click OK.
Step 10 — Now select the Android ADB Interface -> click Next button.
Step 11 — Click Next button again.
Step 12 — Windows Security box will appear, to confirm whether you really want to install the Android USB Driver, so just choose the Install this driver software anyway.
Step 13 — Once you clicked the Finish button, then repeat from step 2 to choose Android Composite ADB Interface.
Step 14 — Done.