Recovery it looks like windows didn t load correctly

“Recovery it looks like Windows didn’t load correctly” is a common error message during the PC startup process in Windows 11/10. If you are hit by this issue when booting your Dell or Lenovo, take it easy and MiniTool collects multiple methods to fix it easily.

It Looks Like Windows Didn’t Load Correctly Windows 11/10 Dell/Lenovo

According to users who are using a Dell or Lenovo, the error message “Recovery it looks like Windows didn’t load correctly” appears on your computer when trying to boot or recover the PC. Sometimes your PC accidentally stops working with a blue screen and after a restart, you get the error. Sometimes Windows not loading correctly appears randomly. See an example from a Windows 11 user:

The screen gives you two options – See advanced repair options and Restart my PC. To troubleshoot the issue, click the first one. If you would like to restart and try again, click the second one. The error screen is shown below:

This issue is mainly triggered by damaged Windows files, missing/corrupt BCD, compromised system integrity, etc. It usually happens on Windows 11, 10, and 8. After knowing the reasons to some extent, you can find out how to fix them. Of course, some other solutions are also can help. Now, let’s go to the next part to figure out what you should do.

Fixes for It Looks Like Windows Didn’t Load Correctly Dell/Lenovo

Enter Safe Mode

Safe Mode is a diagnostic mode in Windows and it boots the system with the minimum drivers and services. When it comes to PC troubleshooting, entering Safe Mode is a safe and reliable way. If you are plagued by the issue of Windows not loading correctly, try this way.

Step 1: On the Recovery page, click on See advanced repair options to enter the troubleshooting interface. Alternatively, you can restart your PC several times when seeing the Windows logo to enter the WinRE page.

Step 2: Click Troubleshoot > Advanced options and you can see several options.

Step 3: Click Startup Settings > Restart. Then, you see the following figure and press F4 or F5 to open Safe Mode.

In Safe Mode, you can run a quick diagnostic, for example, uninstall suspicious software or a recently installed driver. To uninstall the driver, go to Device Manager, locate the driver, and right-click on it to choose Uninstall device. To uninstall an app, go to Control Panel > Uninstall a program, right-click on the program and choose Uninstall.

After that, restart your Dell or Lenovo PC to see if the error “it looks like Windows didn’t load correctly” is fixed. If not, continue the troubleshooting.

Turn Off Hybrid Sleep

According to some users, the Hybrid Sleep feature can cause the error of Windows not loading correctly in Windows 10/11. To fix this issue, make sure you disable Hybrid Sleep and see how to do it:

Step 1: In Safe Mode, type Control Panel into the search box and click this app to open it. View items by large icons.

Step 2: Click Power Options > Change plan settings.

Step 3: Click the Change advanced power settings link to open the Advanced settings tab.

Step 4: Expand Sleep > Allow hybrid sleep and then change On to Off.

Step 5: Click Apply > OK.

Run SFC and DISM Scans

Sometimes Windows not loading correctly is triggered by corrupted system files. To get rid of this issue from Windows 10/11, you need to fix the corruption in the Windows system. To do this work, System File Checker (SFC) is helpful. Besides, you can run a DISM scan to repair bad system images. See how to do the scans:

Step 1: In Safe Mode, type cmd to the search box, right-click on Command Prompt, and choose Run as administrator. Alternatively, you can boot the PC to WinRE and go to Troubleshoot > Advanced options > Command Prompt.

Step 2: Type sfc /scannow and press Enter to begin the scan. This scan will take some time and wait patiently.

Step 3: After the SFC scan, run a DISM scan. Just execute these commands one by one, as shown below. Remember to press Enter after each one.

Dism /Online /Cleanup-Image /ScanHealth

Dism /Online /Cleanup-Image /CheckHealth

Dism /Online /Cleanup-Image /RestoreHealth

Run CHKDSK

Sometimes the file system is corrupted or there are bad blocks on the hard drive, as a result, “Recovery it looks like Windows didn’t load correctly” appears on your Windows 11/10 PC. In this case, it is necessary to run the CHKDSK scan.

Step 1: Open Command Prompt (as shown in the above way).

Step 2: Type chkdsk /f /r and press Enter to check for file system errors and hard drive errors, and then fix the found errors and recover the readable information from the bad sectors.

Rebuild BCD

If the BCD files in Windows 11/10 are missing or corrupted, the error “it looks like Windows didn’t load correctly” may appear on the screen. To fix it, try to rebuild BCD. In WinRE, go to Troubleshoot > Advanced options > Command Prompt. After opening Command Prompt, type bootrec /rebuildbcd and press Enter.

Run Startup Repair

Some users recommend running Startup Repair in Windows Recovery Environment. When seeing the error “Recovery it looks like Windows didn’t load correctly”, click See advanced repair options. Then, go to the Advanced options page and click Startup Repair.

Perform System Restore

If you have a habit of backup via System Restore, you can use a restore point to revert Windows 11/10 to an earlier state to fix Windows not loading correctly on Dell, Lenovo, etc. PC.

Step 1: Click System Restore in WinRE.

Step 2: You can use the recommended restore point or choose to use a different restore point.

Step 3: Then, click Finish to start the restoration operation.

If there are no restore points created previously, this way cannot fix your issue.

Reset Your PC

If all of the above ways fail to solve your issue, the last resort to remove “it looks like Windows didn’t load correctly” from Windows 10/11 is PC resetting. This operation can help to reinstall your system.

Windows 11 gives you an option to keep your personal files during the resetting process. But if you save some important files on your desktop, we still recommend you to back up them in advance to avoid unexpected data loss.

Back up Data Before You Do

To back up significant files/folders, you can seek help from a piece of professional and free backup software. MiniTool ShadowMaker is worth trying. This backup program allows you to easily create a system image, back up your important data via image backup or sync, and clone a hard drive for disk upgrade/disk backup.

To back up your files when encountering the error “it looks like Windows didn’t load correctly”, it is a bit difficult but you can use MiniTool ShadowMaker to create a bootable USB drive on a working PC and boot the unbootable PC from that drive. Then, back up data with the Bootable Edition of this backup software.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Step 1: Download and install MiniTool ShadowMaker on another PC. Then, launch it to the Tools interface and click Media Builder to create a bootable USB drive.

Step 2: On your problematic PC, go to BIOS, change the boot sequence to let Windows start up from the bootable drive, and then enter the MiniTool recovery environment.

Step 3: Launch MiniTool ShadowMaker to its Backup page, choose files/folders you want to back up, specify a storage path and click the Back up Now button to execute the data backup.

To know more information about the backup steps, refer to our previous post – How to Back up Data without Booting Windows? Easy Ways Are Here.

Reset Your PC

After finishing the file backup, follow the steps below to reset the PC with the error Windows not loading correctly.

Step 1: Boot your PC to WinRE by restarting the machine several times when seeing the Windows logo.

Step 2: Go to Troubleshoot > Reset this PC.

Step 3: Choose the Keep my files option to continue.

Step 4: Select Cloud download or Local reinstall. If you don’t know which one to choose, refer to this post – Cloud Download vs Local Reinstall: Differences on Win 10/11 Reset.

Step 5: Continue the resetting operation by following the on-screen wizards.

“Get the error ‘Recovery it looks like Windows didn’t load correctly’ in Windows 11/10? After trying these ways, it can be easily removed. You can share these solutions with more persons on Twitter.”Click to Tweet

Recover Data from Your Unbootable PC

Sometimes when encountering the situation – it looks like Windows didn’t load correctly Windows 11/10, you choose to recover data before fixing it to avoid additional trouble. Well then, how to do this task? Data recovery is not easy but things can turn simple if you use professional data recovery software – MiniTool Power Data Recovery.

It enables you to recover files from a variety of situations like an unbootable PC, inaccessible hard drive, formatted/lost/deleted/RAW partition, Windows update, etc. In case of Windows not loading correctly, you can also easily get your data from the hard disk.

Just get a paid edition like Personal Ultimate to create a bootable USB drive by clicking the CD icon and then run the machine from that drive. Launch the bootable edition of this program for data recovery. Just go to the Devices tab and click Scan after hovering your mouse over the system disk. Wait some time until the scan finishes. Then, find what you want to recover, choose them and click Save.

Bottom Line

Run your PC but get a blue screen saying “Recovery it looks like Windows didn’t load correctly” in Windows 11/10? To remove this error from your Lenovo or Dell computer, you can try the above solutions collected by us. Just have a shot one by one by following the steps. Of course, if you figure out some other workarounds, welcome to share them with us. Thanks a lot.

It Looks Like Windows Didn’t Load Correctly FAQ

If you see an error message It looks like Windows didn’t load correctly in Windows 11/10 while trying to boot or recover your operating system, you can follow these troubleshooting tips to get rid of this issue. This error may appear randomly due to some corrupted system or boot files.

The entire error message says something like this:

It looks like Windows didn’t load correctly

If you’d like to restart and try again, choose “Restart my PC” below. Otherwise, choose “See advanced repair options” for troubleshooting tools and advanced options. If you don’t know which option is right for you, contact someone you trust to help with this.

To fix the It looks like Windows didn’t load correctly error in Windows 11/10, follow these steps:

1. Restart your PC
2. Rebuild BCD
3. Run Automatic Startup Repair
4. Use System Restore point
5. Troubleshoot in Safe Mode

To know more about these solutions in detail, keep reading.

1] Restart your PC

It is the very first thing you need to do when you are getting the aforementioned error. At times, a simple restart fixes countless problems within moments. If a bug is causing this issue in Windows 11 or Windows 10 PC, you may be able to bypass it by restarting your computer.

To restart your computer, you do not need to use the physical restart button. Instead, you can click on the Restart my PC button visible on the error screen.

It will restart your computer immediately and allow you to sign in to your user account. However, if you are still getting the same error message frequently, you need to go through the subsequent solutions.

Read: Windows PC will not boot up or start

2] Rebuild BCD

BCD or Boot Configuration Data is one of the most important things to start or boot your computer. Whether it is the installation or the regular start of the system, you must have the BCD intact in order to get a smooth system. However, if there are some issues with the Boot Configuration Data, you may encounter the aforementioned issue.

That is why it is recommended to rebuild the BCD or Boot Configuration Data. The best thing is that you do not need third-party apps, and it is possible to do that with the help of the Command Prompt. For that, you need to click on the See advanced repair options and choose the Command Prompt option.

Then, enter the following command and hit Enter:

bootrec /rebuildbcd

Read: Windows computer unable to boot to BIOS

3] Run Automatic Startup Repair

Run Automatic Startup Repair and see if that works for you. Clicking on the See advanced repair options button that you see on the error screen may help you get there quickly.

Read: Windows does not boot after compressing System Drive

4] Use System Restore point

If there are some corrupt system files, you must use the System Restore point to restore your computer to an earlier point when there was no issue. However, this solution works only when you created a System Restore point in the past. If so, you can follow this guide to restore your computer using System Restore point.

You may need to boot into Windows with your Windows Installation Media or Recovery Drive and select Repair your computer to enter Troubleshoot > Advanced Startup Options > Command Prompt. You can now use the System Restore option or CMD to run commands.

Read: Windows computer won’t boot after System Restore

4] Troubleshoot in Safe Mode

Can you boot in Safe Mode? If you can, then it makes things easier. If you have recently installed any driver or software, you can boot Windows in Safe mode and troubleshoot. If you had already enabled the F8 key earlier, things are easier as you press F8 while booting, to enter Safe Mode.

At times, a corrupt or incompatible driver can also cause the same issue. In such situations, using the Safe Mode is probably the best and most straightforward solution you have.

How do you fix Recovery It looks like Windows didn’t load correctly?

To fix the It looks like Windows didn’t load correctly error, you need to use the aforementioned solutions. First, you can restart your computer to check if it resolves the problem or not. Then, you can rebuild the BCD, use the System Restore point and troubleshoot the issue in the Safe Mode.

Why does my computer say It looks like Windows didn’t load correctly?

If there are some corrupt system files, your Windows computer may display that message on your screen. The other reason is the corrupt Boot Configuration Data. In that case, you can simply rebuild the BCD on your computer using the bootrec /rebuildbcd command.

Hope this guide helped.

Read: How to boot to Windows Recovery Environment to fix problems?

Windows 10 recovery it looks like windows didn’t load correctly- this is new error of windows 10,it looks like windows didn’t load correctly 2021, recovery it looks like windows didn’t load correctly reddit, looks like windows didn’t load correctly windows 10, it looks like windows didn’t load correctly see advanced repair options, it looks like windows didn’t load correctly windows 11, it looks like windows didn’t load correctly 2020, windows didn’t load correctly black screen .  If you are wondering then you are in the right place. Here you will find out how to fix this issue with five useful solutions. If you have extra tips, you can contact us and share your solutions.

What causes your PC did not start correctly?

As mentioned above, the Windows did not start correctly issue can be caused by a third-party program or a recent hardware change on your system, a BCD error, or a file system error.

If you’d like to restart and try again, choose “Restart my PC” below. Otherwise, choose “See advanced repair options” for troubleshooting tools and advance options. If you don’t know which option is right for you, contact someone you trust to help with this

The F8 key method does not work on Windows 10, Windows 8 and 8.1. Hence, getting onto Safe Mode requires the following steps:-

If your PC is working properly:
1) On the Windows Start Screen/Menu, type Advanced.
2) Click on Advanced startup options.
3) Under the Advanced Startup heading at the bottom of the General Settings screen, click on Restart now.
4) Your computer will restart and you will be taken to the Advanced Startup Options menu. To easily reach this menu, on Windows 8 start screen, you could choose restart while holding the Shift key.
5) Click on Troubleshoot and then on the Advanced Options button.
6) Now, click on Startup Settings.
7) At the Startup Settings Screen, click on Restart.
Your computer will restart to Advanced Boot options from where you can choose a Safe mode option based on your need.

You can also force Windows to start in Safe mode.

If your PC is not working properly:

Windows 8 monitors your PC’s startup for problems and when an error is detected, it automatically takes you to the new Recovery mode with the message “Recovery. It looks like Windows didn’t load correctly.” In this case:-

1) Select Advanced Repair Options and then click on Troubleshoot.
2) Click on the Advanced Options button.
6) Now click on Startup Settings.
7) At the Startup Settings Screen, click on Restart.
Your computer will restart to Advance Boot Options from where you can choose a Safe mode option based on your need.

Method 2: You can fix it by uninstalling new software or drivers:

• Insert the Windows bootable drive and boot from it.
• Select your language preferences, and click Next.
• Click Repair your computer.
• Select Troubleshoot > Startup Settings > Restart.
• Press the F4 key to boot Windows into Safe Mode.
• Then, you can uninstall new software or drivers.

Method 3: soveld:

I’m getting this message shortly after windows turns off my monitors. I have it set to turn them off after 20 minutes. In less than a minute the screen comes on, goes blue and displays “It looks like Windows load correctly.” I select restart and the system restarts just fine. I’ve run the SFC as shown above and it says “Windows did not find any integrity violations.” 

This started shortly after I upgraded to Windows 10. 

Would appreciate any help you might provide.

Thanks.

UPDATE 08/20/2015: I solved the issue by turning off hybrid sleep. Because the problem happened when the computer put itself to sleep,

 I went to Control Panel > Hardware and Sound > Power Options > Edit Plan Settings and selected “Change advanced power settings.”

I expanded Sleep, then Allow hybrid sleep and selected Off.

This solved my problem. Note my problem only occurred when the computer put itself to sleep. It always booted up just fine.

How to fix it looks like windows didn’t load correctly windows 11

I understand that you have encountered the problem of frequent blue screen of the computer. I’m here to help you out.

I’m sorry you ran into this problem. In order to help you solve your problem, we need your blue screen log to help you analyze your problem.

The log is located at: C:\Windows\Minidump

If there is no corresponding file in the folder, you need to turn on file storage. Wait for the next blue screen to get the logs.

Press Windows key + S key, enter Control in the search bar, find and open “Control Panel” > System and Security > System > Advanced System Settings > Advanced > Startup and Recovery > Settings, Write Debug Information Select “Small Memory Dump”, OK and restart the computer.

Rest assured, Microsoft does not collect your personal privacy for any reason, we only collect question codes. You can click here to have a private chat with me, in the chat window you can send me the blue screen log. Rest assured that no one else in this window will have access to your data.

We will help you analyze the cause of the blue screen as soon as we receive your logs.

Thank you for your understanding and cooperation.