To obtain updates from this website, scripting must be enabled.
To use this site to find and download updates, you need to change your security settings to allow ActiveX controls and active scripting. To get updates but allow your security settings to continue blocking potentially harmful ActiveX controls and scripting from other sites, make this site a trusted website:
In Internet Explorer, click Tools, and then click Internet Options.
On the Security tab, click the Trusted Sites icon.
Click Sites and then add these website addresses one at a time to the list:
You can only add one address at a time and you must click Add after each one:
http://*.update.microsoft.com
https://*.update.microsoft.com
http://download.windowsupdate.com
Note:
You might have to uncheck the Require server verification (https:) for all sites in the zone option to enter all the addresses.
Table of Contents
Ralink WiFi Adapter Driver Windows 10:
To download the right Ralink WiFi Adapter driver for Windows 10, follow the steps outlined below. The driver package will contain the wireless LAN controller for the Mediatek (Ralink) device. Make sure you use the right one for your model. If you don’t find it in the package, try to download the driver from the manufacturer’s website. After downloading it, follow the instructions carefully and install the driver.
Ralink RT5390 b/g/n WiFi Adapter:
The Ralink RT5390 b/G/N WiFi adapter is designed to connect to the Internet. When installing the driver, it will need to add an exception to Windows Firewall and install 30 files. The software is approximately 3.51 MB in size. It is most commonly used in the United States, United Kingdom, and Italy. To install the correct driver, follow these simple steps.
The easiest way to download the latest drivers is to visit the manufacturer’s website. You can find the driver that works for your specific model by following the links below. Make sure you use the latest version of the driver file to avoid conflicts. It’s important to note that driver files are often different from those of your current computer. It is also possible that your driver files are outdated.
Ralink RT3290 Wi-Fi Adapter:
If you cannot connect to the internet using your Ralink RT3290 Wi-Fi Adapter, then you most likely need to update the driver. If you are not familiar with the process of updating drivers, you may find it difficult to locate and install the right driver manually. Fortunately, you can easily update the Ralink RT3290 driver by following step-by-step instructions on how to update it using Driver Easy.
The first step is to run a command prompt as an administrator. Type the following: netsh Winsock reset. Click OK, and then restart your PC. Next, open Device Manager and locate the wireless adapter. Right-click it and choose to uninstall. Once you’re done with this step, you can install the latest driver and check for any other problems. If the problem persists, you can try using a wired connection instead.
-
Ralink RT3290 802.11bgn Wi-Fi Adapter
Версия:
5.00.03.0000
(24 авг 2012)
Файл *.inf:
netr28x.inf
Windows Vista
x64,
7
x64,
8
x64,
8.1
x64,
10/11
x64
-
Ralink RT3290 802.11bgn Wi-Fi Adapter
Версия:
10.065.0421.2023
(21 апр 2023)
Файл *.inf:
oem8.inf
Windows Vista
,
7
,
8
,
8.1
,
10/11
В каталоге нет драйверов для Ralink RT3290 802.11bgn Wi-Fi Adapter под Windows.
Скачайте DriverHub для автоматического подбора драйвера.
Драйверы для Ralink RT3290 802.11bgn Wi-Fi Adapter собраны с официальных сайтов компаний-производителей и других проверенных источников.
Официальные пакеты драйверов помогут исправить ошибки и неполадки в работе Ralink RT3290 802.11bgn Wi-Fi Adapter (сетевые устройства).
Скачать последние версии драйверов на Ralink RT3290 802.11bgn Wi-Fi Adapter для компьютеров и ноутбуков на Windows.
RT5390/RT3290 is a Mini PCI Express wireless module supporting IEEE 802.11 b/g/n standards, used in many makes of notebooks including HP models can be expanded below. Windows 10 drivers for both 32bit and 64bit OS is below too.
Basic Specs:
- 1T1R mode with 150Mbps with PHY rates for both transmit and receiving
- Dynamic data rate: Maximum data rate up to 150Mbps. 11n: Legacy, Mixed and
- Green Field modes, 11g: 54/48/36/24/12/9/6 Mbps (Auto Sensing); 11b:11/5.5/2/1
- Mbps (Auto Sensing)
- support 20MHz/40MHz Bandwidth
- Security support for 64/128 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)
- Supports 6, 9, 12, 18, 24, 36, 48, 54Mbps for OFDM; 5.5, 11Mbps for CCK;and
- 1,2 Mbps for Barker modulation.
- Operating Frequency 2.412GHz~ 2.484GHz
- Transmit Output Power: 802.11.g 14+/-1dBm; 11b 18+/-1dBm
- Receive Sensitivity 11b: -75dBm @ 11Mbps (Typical)；11g: -65dBm @ 54Mpbs (Typical)
- Operating Voltage 3.3V/DC ± 5%
- Bus Interface Mini PCI-E
- Antenna Port Impedance 50ohm
You’re very welcome.
Yes, there is a way to manually install the driver.
Go to the device manager and click on the Ralink wifi card.
Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option, and browse to the driver folder that was created when you ran the file.
The folder will be located in C:\SWSetup\sp71571.
Make sure the Include Subfolders box is checked, and the driver should install.
Then restart the PC.
The problem is not with HP, but with Ralink (Mediatek).
That was the one and only W10 driver they made for that card, and what is happening two years down the road, with all these new updates to W10, some hardware no longer works because the manufacturers won’t update the drivers.
I use this USB wifi adapter…works just fine on all versions of W10. I just updated to the newest Fall creators update.
I don’t know why this thing has gotten so expensive. I got it for $35.00. I bought 3 of them.