One of your disks needs to be checked for consistency windows 7 что это

When a user turns on the computer as usual, sometimes, a blank screen appears in front of them immediately. The on-screen message may read that one of your hard drives needs to be checked for consistency.

So what does this message, one of your hard drives needs to be checked for consistency mean? Simply put, it means that either the file system is corrupt or the system files have issues.

Microsoft created the CHKDSK Windows function to check and assure disk integrity for faulty sectors and fragment spaces to optimize disk performance and boost overall effectiveness. Windows asks the user to perform a CHKDSK when it detects faults on a drive.

So, in this article, we shall discuss the reasons for the message that one of your hard drives needs to be checked for consistency and steps on how to resolve this issue. Read on to find out more.

The primary reason you receive the message is that Windows has detected file system corruption, and Windows OS needs to use the CHKDSK tool to ensure that. The reason for corruption can be many; below, we list some methods.

• Improper system shutdown: The message one of your hard drives needs to be checked for consistency might display on your screen when you turn on your computer if your PC does not shut down correctly. An abrupt shutdown is unsuitable for your PC, thus demanding a disk check.
• Sudden power outage: The second reason is a power outage. If your PC does not have a power backup and if your system abruptly shuts down due to power failure, this can cause your PC to demand a hard disk checkup.
• Windows computer froze: If your computer freezes up for unknown reasons, you might force your PC to shut down. This abrupt shutting down of your PC might make one of your hard drives need to be checked for consistent messages.
• A USB disk is removed abnormally: Another problem is pulling the flash drive out of the computer while Windows is still using it might cause problems to the PC. This message is due to the abnormal removal of a USB drive.

Solve One of Your Disks Needs to Be Checked for Consistency Error

It is generally advised to complete the disk check when you see the error message requesting it. But if you accidentally skipped it, you can check the five fixes below to solve the issue that one of your disks needs to be checked for a consistency message appearing when you turn on your computer.

Fix 1. Use the Registry Editor to Fix It

You can start by disabling automatic disk checks using the Registry Editor.

Step 1. Type Regedit on the Start menu.

Step 2. Select «Registry Editor».

Step 3. On the Registry Editor window, on the left pane, expand the following option:

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

Step 4. Find and double-click the «BootExecute» string. If the value data of Boot execute is set to autocheck autochk * /r\DosDevice\C: Please change it to autocheck autochk * and press OK to save the changes.

Check whether the error—Your Disks Needs to Be Checked for Consistency— reappears after restarting your computer.

Fix 2. Utilize the CHKDSK Command

The following fix is a manual disk check by launching CHKDSK from an Elevated Command Prompt, which gives users full rights and is an elevated command prompt version. To do this, follow the steps given below:

Step 1. Press the Windows key + R to open the Run dialogue box.

Step 2. Type CMD and press Ctrl + Shift + Enter to boot Command Prompt on Windows 10.

Step 3. Inside the new window, type in the following command: chkdsk /r, and press Enter.

If the disk consistency is on the C drive, you need to restart your PC and schedule the Run. You will get the prompt about it. Press Y. If it’s any other drive, you can run the tool without a restart.

After the process, restart your PC and check if the message reappears.

Fix 3. Run Fsutil Dirty Query Command

Although this technique is rare as others, some users claim that they could resolve one of your disk’s needs to be checked for consistency errors by running the command. On Windows operating systems, the Fsutil.exe application aids users in controlling the settings of various file systems. Follow the instructions given below to run this command:

Step 1. Type cmd into the Start menu.

Step 2. Right-click on Command Prompt and select Run as administrator from the drop-down menu.

Step 3. On the new window, type the following command and press Enter. fsutil dirty query X:

(Replace the letter X with the problematic drive letter of your computer.)

Step 4. If the disc drive is dirty, as shown in the window, type the following command: chkdsk X: /f /x and press Enter. Remember to replace the letter X.

The option «/r» tells the tool to find the bad sectors on the drive and recover readable information, while the «/x» forces the industry to dismount before the process starts.

If the prompt shows that the disk is not dirty, the process is complete; you can restart the computer and check if the message reappears.

Fix 4. Use Disk Defragment

The method to solve this issue is the Disk Defragment method. Here is how you do it:

Step 1. Open File Explorer, go to This PC and find the hard drive.

Step 2. Right-click on it and choose «Properties».

Step 3. Next, select the «Tools» tab.

Step 4. Click the «Optimize button» under the Optimize and defragment option.

Step 5. On the new window under Status, choose the drives you want to optimize and click on the Optimize button.

Fix 5. Format the Disk

While formatting a disk in Windows can effectively fix a drive, the process is complicated. It will delete all the data. Therefore, before implementing this fix, you should move your files from the affected drive to other secure disks.

Step 1. Go to This PC and choose the affected hard drive.

Step 2. Right-click and select «Format».

Step 3. Choose the File System, check the «Quick Format» column, and press Start.

After the format process, restart your computer and check if one of your hard drives needs to be checked for consistency message appearing again.

Further Solution: Recover Data When the Drives Corrupt

In some cases, files may get lost after performing CHKDSK, especially after checking the disk on corrupt drives. And when users want to format the disks to fix the problem, there is an excellent possibility of data loss. So they should protect their data safety first. For Windows users, a specialized data recovery tool can be helpful.

So, we recommend installing EaseUS Data Recovery Wizard, a powerful data recovery program. It was developed to help with data loss due to system crashes, file system corruption, and unintentional file deletion.

Conclusion

Windows comes with a system utility called Check Disk. Admin can use it to check a volume’s file system integrity and repair logical file errors. Additionally, it assists in examining damaged disk sectors and recovering data from them.

Although the disc check that launches with your computer causes no damage, it may indicate a failing hard drive or a file system that needs a fix. If one of your disks needs to be checked for a consistency message appearing on the Windows startup screen, it is often necessary to run it at least once.

If you miss out on running the disk check, the steps mentioned in the article will help you to run the disk check safely. Although this process may erase data from your hard drive, you can always use the data recovery tool EaseUS Data Recovery Wizard to recover your lost data.

One of Your Disks Needs to Be Checked for Consistency FAQS

Below are some frequently asked questions about how to fix one of your disks that needs to be checked for consistency in Windows 7/8/10/11.

1. How do I fix one of my disks that needs to be checked for consistency?

When one of your disks needs to be checked for consistency message appears on your startup screen; immediately run the disk check instead of skipping it. You can also follow the solutions mentioned in the article if you still need to run the disk check.

2. Why are Windows checking the disk for consistency?

When there is inconsistency in the file system, the Windows OS will attempt to fix the system file error hindering a startup procedure. The chkdsk tool checks each sector and tries to correct the problem.

3. Why does my computer keep scanning and repairing the drive?

Malware, poor system upkeep or human mistake are all potential causes. If you receive the error message every time you turn on your PC, run the CHKDSK tool. If it cannot fix the problem, connect to another PC and run the tool. Chances are that the drive has significant issues, and Windows cannot resolve them.

4. How long should scanning and repairing the drive take?

Depending on the size of your drive and the number of faults identified, the time taken for your computer to scan and repair the hard drive may take longer than two hours.

Updated on May 14th, 2021

This post focuses on “one of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue.” error message which appears during Windows booting. If your computer sticks to this black screen, you should continue reading to find out solutions.

Most Windows users must have experienced this issue. We start up computer as normal, but suddenly a black colored screen appears. The onscreen message says your hard drive needs to be checked for consistency, the complete information:

Checking file system on C: 

The type of the file system is NTFS. 

One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue. 

To skip disk checking, press any key within 10 second(s).

If you press any key before the countdown ends, the disk check will be aborted. However, when you restart computer, you’ll get same error message again because operating system still thinks the drive needs to be scanned and checked. If no key is pressed, the disk checking will be done automatically.

Causes of “one of your disks needs to be checked for consistency”

The automatic disk check appears after an improper system shutdown, for example, there is a sudden power outage or your computer froze, battery is removed, or you have to press the restart button

This error also occurs if a USB disk is removed before Windows has finished with it, such as you remove USB disk directly while it is saving data without click the Safely Remove hardware. Therefore, operating system is likely to mark your device as “dirty” and schedule a complete scan before marking it “clean” again.

There is something wrong with operating system. Sometimes Windows just prompts to scan your disk automatically every time you boot even though you have checked disk completely.

How to fix “one of your disks needs to be checked for consistency”?

We suggest you to solutions provided below to deal with the issue that Windows asks to check disk consistency. It should be noted that sometimes chkdsk command may repair error excessively, which might cause data loss. Thus it is necessary to backup important files before performing disk checking and repairing. If your files have been lost, you can restore them following steps provided in next section.

Solution 1: Disable automatic disk check through Registry Editor

Disclaimer: Serious problem might be caused if registry is modified incorrectly. You can backup registry before making any changes so that you can restore it in case of any error occurs. If you follow these steps carefully, you should not any problem.

1. Click Start menu and enter “regedit” in search box. Then you can right-click regedit.exe and choose “Run as administrator”.
2. On the left part of Registry Editor expand the following keys: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
3. Find and double-click key BootExecute on the right pane and you can see the default value is autocheck autochk*. This value means every drive is checked for consistency. To disable aotucheck on C: at system startup, you just need to add /K:C between autochk and *, which will look like: autocheck autochk /k:C *

Solution 2: Run chkdsk command from WINRE

1. Remove all floppy disk, DVDs and CDs from your computer and restart computer by pressing power button. Press F8 before Windows logo appears.
2. The Advanced Boot Option appears and you can use arrow keys to highlight options. Select Repair your computer and press Enter.
3. Choose your keyboard layout and click Next.
4. On the System Recovery Options Window click Command Prompt to open a command prompt window.
5. Type command chkdsk /f and press enter; then type chkdsk /r and hit Enter.

Solution 3: Test hard drive with a diagnostic tool

If disk check cannot solve the problem, you may need to test hard drive with diagnostic tool.

1. Test hard drive with the utility from drive’s manufacture. For example, if your hard drive is WD, then you can go to its site to find if any diagnostic tool is available. If you can find one, then perform a thorough scan for your disk.
2. Test hard drive using 3rd party tool like PartitionGuru which provides free function to rest hard drive status and bad sectors.
3. Run the program from Windows computer, right-click the disk to be tested and choose “Verify or Repair Bad Sectors”.
4. Click Start Verify button and the application starts the complete bad sector scanning.

Recover data from “one of your disks needs to be checked for consistency”?

In some cases files may get lost after performing chkdsk especially after checking disk on corrupt drives. Here are two methods to recover data after chkdsk.

Method 1: Recover lost data from Found.000 folder

Before chkdsk starts deleting files, you can receive a message asking “Convert lost chains to files <Y / N>?” If you enter Y, disk check operation will save each lost chain in found.000 folder which locates the root directory of the disk being checked. If you type N, system will fix the disk without saving lost content of lost allocation units.

Thus, you should find the Found.000 folder first. This folder is usually hidden by default, but you can view it by displaying hidden files and folders: type folder in the search box on the taskbar and select Show hidden files and folders from searching results; select “Show hidden files, folders, and drives” under Advanced settings and click OK.

Now you can see the folder, double-click it to open it, and you can see lots of .chk files. Such files are not accessible before changing extension to correct ones. For example, if you are sure certain file is a .jpg picture file, you can change .chk to .jpg, after which the file can be opened. However, this method won’t be workable if you do not remember the correct extension or there are too many files.

Method 2: Recover lost files with free data recovery software

We recommend you to try free data recovery software to rescue files deleted by chkdsk. Eassos Recovery Free is the free version of Eassos hard drive recovery software, but it works the same as the full version when it searches for lost files. Let’s see how to complete the recovery task using this free tool.

1. Launch Eassos Recovery Free and select recovery mode based on data loss causes.
2. Select the disk where lost files were stored and click Next button. A quick and deep scanning will start.
3. After scan, you can preview all listed files (file preview supports text, documents, picture, video & audio files) and choose files you want to recover. Click Recover button to save selected files to a different drive.

Одна из распространенных проблем, с которой сталкиваются пользователи операционной системы Windows 7, — это ошибка «One of your disks needs to be checked for consistency». Сообщение об этой ошибке может появиться при запуске компьютера или во время работы системы.

Возникновение данной ошибки может быть связано с различными проблемами, такими как повреждение файловой системы, ошибки чтения и записи, а также проблемы с самим жестким диском. Независимо от причины, важно принять меры для исправления данной ошибки, чтобы избежать потери данных и сохранить нормальную работу компьютера.

Первым шагом для исправления ошибки «One of your disks needs to be checked for consistency» является запуск инструмента проверки диска. Для этого следует открыть командную строку с правами администратора и выполнить команду chkdsk с параметром /f. Этот инструмент позволяет сканировать и исправлять ошибки на диске.

Если проверка и исправление ошибок не помогают решить проблему, рекомендуется обратиться к специалисту. Он сможет провести более глубокий анализ состояния жесткого диска и произвести дополнительные действия для его восстановления или замены.

Важно помнить, что ошибка «One of your disks needs to be checked for consistency» может быть связана с серьезными проблемами с вашим жестким диском, поэтому необходимо вовремя обратить внимание на данную проблему и принять необходимые меры. В случае возникновения данной ошибки рекомендуется сделать резервную копию ваших данных, чтобы избежать их потери.

Windows 7: Ошибка «One of your disks needs to be checked for consistency»

Если вы столкнулись с этой ошибкой, есть несколько действий, которые можно предпринять для ее решения:

1. Перезагрузите компьютер.

Первым шагом, который стоит попробовать, является перезагрузка компьютера. Иногда простое перезапуск может помочь исправить проблему, особенно если она была вызвана временной ошибкой.

2. Дождитесь автоматической проверки диска.

При перезагрузке Windows 7 может автоматически запустить проверку целостности диска. В этом случае просто дождитесь окончания процесса и следуйте инструкциям на экране. Это может занять некоторое время, особенно если диск большой, поэтому будьте терпеливы.

3. Проверьте жесткий диск с помощью инструмента CHKDSK.

Если автоматическая проверка диска не запускается или не удается исправить проблему, вы можете вручную запустить инструмент CHKDSK (Check Disk). Для этого:

• Нажмите правой кнопкой мыши на значок «Пуск» в левом нижнем углу экрана и выберите «Командная строка (администратор)».
• Введите команду «chkdsk C: /f» (без кавычек), где «C» — это буква диска, который требуется проверить. Если у вас несколько дисков, вам может потребоваться проверить каждый из них по очереди.
• Нажмите клавишу Enter, чтобы выполнить команду. Вы можете видеть предупреждение о том, что проверка будет выполнена при следующей перезагрузке.
• Перезагрузите компьютер и дождитесь, пока CHKDSK завершит проверку диска.
4. Сохраните важные данные и замените жесткий диск.

Если ни одна из предыдущих мер не помогла решить проблему, скорее всего, вам следует сохранить важные данные и заменить жесткий диск. Ошибки проверки целостности диска могут быть признаком серьезных проблем с жестким диском, и его замена может быть необходима.

Часто, однако, автоматическая проверка или проверка с помощью инструмента CHKDSK помогают решить ошибку «One of your disks needs to be checked for consistency». В любом случае, регулярное резервное копирование ваших данных является важной профилактической мерой для предотвращения потери информации при возникновении подобных проблем.

Что означает ошибка «One of your disks needs to be checked for consistency»

Это сообщение об ошибке указывает на то, что в системе была обнаружена несоответствие данных на диске, и требуется проверка и исправление проблемы для обеспечения нормальной работы компьютера.

При появлении этой ошибки обычно предлагается запустить программу проверки диска (chkdsk), которая будет анализировать данные на диске и исправлять обнаруженные ошибки. Процедура проверки может занять некоторое время, в зависимости от размера диска и объема данных.

Если ошибки не будут исправлены, это может привести к дальнейшим проблемам с работой операционной системы, потере данных или даже полной неработоспособности диска.

Для запуска программы проверки диска можно воспользоваться следующей командой:

chkdsk C: /f /r

где «C:» — это буква диска, который нужно проверить. Ключи «/f» и «/r» указывают, что необходимо исправить обнаруженные ошибки на диске и проверить его на наличие повреждений в физическом состоянии.

Однако перед запуском проверки диска рекомендуется создать резервную копию важных данных, так как в процессе проверки может произойти потеря или повреждение файлов.

Если после запуска проверки диска проблема не устраняется, возможно, проблема связана с физическим состоянием жесткого диска, и вам может потребоваться заменить его или обратиться к специалисту для дополнительной диагностики и ремонта.

Причины возникновения ошибки

Ошибка «One of your disks needs to be checked for consistency» может возникнуть по разным причинам. Вот некоторые из них:

• Проблемы с файловой системой диска.
• Неправильное выключение компьютера.
• Неполадки в жестком диске или других компонентах системы.
• Вирусы или вредоносное программное обеспечение.
• Физические повреждения диска.

Если возникла ошибка, необходимо приступить к проверке и исправлению проблемы как можно скорее, чтобы избежать возможной потери данных или дальнейшего ухудшения состояния компьютера.

Как исправить ошибку «One of your disks needs to be checked for consistency»

Если вы столкнулись с этой ошибкой, не стоит паниковать. Существуют несколько способов ее исправить:

Способ 1:	Запустите утилиту проверки диска chkdsk с правами администратора. Для этого:
	— Откройте командную строку, нажав сочетание клавиш Win + R и введя команду cmd.
	— В командной строке введите команду chkdsk C: (где C — буква диска, требующего проверки).
	— Нажмите клавишу Enter и дождитесь завершения проверки.

Способ 2:	Используйте инструмент System File Checker (SFC), который позволяет восстанавливать поврежденные системные файлы. Для этого:
	— Откройте командную строку с правами администратора.
	— Введите команду sfc /scannow и нажмите Enter.
	— Дождитесь завершения сканирования и исправления ошибок в системных файлах.

Способ 3:	Воспользуйтесь программой Check Disk Utility, которая предоставляет расширенные возможности проверки и исправления ошибок на диске. Для этого:
	— Скачайте и установите программу Check Disk Utility.
	— Запустите программу и выберите диск, который требует проверки.
	— Нажмите кнопку «Начать проверку» и дождитесь завершения процесса.

После выполнения одного из указанных способов проверки и исправления ошибок на диске, рекомендуется перезагрузить компьютер, чтобы изменения вступили в силу.

Если ни один из указанных способов не помог вам исправить ошибку, возможно, проблема связана с самим жестким диском, и вам стоит обратиться к специалисту для проведения более глубокой диагностики и ремонта.

Метод 1: Использование командной строки

Шаг	Действие
1	Откройте меню «Пуск» и в поле поиска введите «cmd».
2	Нажмите правой кнопкой мыши на «Командная строка» и выберите пункт «Запуск от имени администратора».
3	В командной строке введите следующую команду: chkdsk /f C: (где «C» — это буква диска, на котором нужно проверить целостность).
4	Нажмите клавишу «Enter» и дождитесь завершения процесса проверки.

После завершения процедуры проверки диск будет перезагружен, чтобы применить изменения. Будьте осторожны при работе с командной строкой и точно следуйте указанным инструкциям.

Метод 2: Использование утилиты проверки диска

Если вы столкнулись с ошибкой «One of your disks needs to be checked for consistency» в Windows 7, вы можете использовать встроенную утилиту проверки диска для исправления проблемы. Процесс может занять некоторое время, но чаще всего он успешно решает проблему с носителем.

1. Шаг 1: Нажмите клавишу «Пуск» и в поисковой строке введите «cmd».
2. Шаг 2: Найдите результат поиска «cmd.exe» и щелкните правой кнопкой мыши.
3. Шаг 3: В контекстном меню выберите «Запустить от имени администратора».
4. Шаг 4: В открывшемся окне командной строки введите команду «chkdsk C: /f» и нажмите клавишу «Enter». Здесь «C:» — это буква диска, который нужно проверить. Если необходимо проверить другой диск, замените «C:» на соответствующую букву.
5. Шаг 5: Убедитесь, что вы ввели команду правильно, и нажмите клавишу «Y» для подтверждения запуска проверки диска при следующей перезагрузке компьютера.
6. Шаг 6: Перезагрузите компьютер, чтобы начать проверку диска. Утилита проверки диска выполнит сканирование и исправление ошибок на выбранном диске.

The error message – One of your disks needs to be checked for consistency – appears now and then on the computer; it makes people suffering since they don’t know what’s going on and how to fix the problem properly. That’s why I’m writing this post.

Most people will be freaked out when finding that the system is not booted as usual. Different kinds of error messages may appear on the computer screen. “One of your disks needs to be checked for consistency” is a common one.

Are you familiar with this error? Do you know what the best way is to deal with it? If you happen to be the victim of this problem, congratulations, you’ve got to the right place. In the following content of this article, I’ll show you how to deal with the Windows needs to check disk for consistency situation properly (how to recover files after check disk and how to fix check disk for consistency error according to your needs).

You may jump to the paragraph you are interested in directly.

Error Message – One of Your Disks Needs to Be Checked For Consistency

The situations in which Windows asks to check your hard drive for consistency can be roughly divided into two types:

• The disk check can be finished automatically and completely. Then, you can boot into the system as usual.
• The disk check for consistency freeze, so you cannot start your computer successfully.

In this part, I’ll talk about them respectively and show you how to work with the “CHKDSK deleted my data” issue & how to get data off a hard drive that won’t boot.

Files Are Missing after Check Disk

When encountering the “one of your disks needs to be checked for consistency” error, many users are prone to let the disk check run in order to fix the problems they may think exist on their computer disk. Sometimes, the check process can be finished smoothly, but sometimes, it can’t be done. Well, does it mean everything goes fine when the check disk is finished completely and you start the computer successfully? Of course not!

Please look at this case:

Hi, guys. Just got this error when I switched on my computer: one of your disks needs to be checked for consistency. (G:) The disk in question is one of the two partitions (F: and G:) of an old HD that I just slotted into my new system 3 days ago. It was working fine, and able to browse files on it fine until earlier. I let the chkdsk run, and it found some errors and orphaned files etc. Now when I’m in Windows, under My Computer, F: shows with details of space etc., and G: is there but doesn’t show details. What do you suggest I do next? My OS is in my new drive, so it isn’t a problem. This old drive has been with me for 7 years, and I’m wondering if it could be failing. Also, I was shifting the CPU earlier, could it have been due to that? EDIT: Just tried accessing G: in My Computer, and after the green bar filled up for a while, a message popped up saying: G: needs to be formatted before use. Do you want to format it now? I clicked No, and then an error message popped up saying: G: is not accessible. Data Error: Cyclic Redundancy Check.– asked by shank on SevenForums

Shank said that he was in Windows and found that G: didn’t show details. When he tried accessing G:, the message popped up, saying that G: needs to be formatted before use. In this case, he loses access to all the files saved on G:, obviously. If any of those files are important to him, he will definitely make every effort to recover data after check disk.

Press Any Key to Skip Disk Checking Not Working

When Windows asks to check disk for consistency, there are also some people choose to reject this request. They prefer to press any key to skip the disk checking, as prompt said. Yet, how will you respond when one of your disks needs to be checked for consistency stuck? Are you afraid of losing all the data saved on the current computer? Please don’t be, since I have a way to help you recover data from the internal disk (see the next part).

Let’s see a specific case first:

I am currently having an issue. Whenever I start up my PC, the following message appears: Checking file system on C:. The type of the file system is NTFS. Volume label is ACER. One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue. To skip disk checking, press any key within 1 second(s). This message counts down to 1 second and freezes. I tried leaving it for 4 hours today as I went to school. Came home, and it was still on this screen. As I said, every time I start up my computer, this message appears and I am forced to force shut down the computer if I do not hit a key in time. I am wondering if there is an alternative and recommended option to run this disk check to avoid skipping this message on every startup.– put forward by Sean1082 on SevenForums

Sean said that when the message counted down to 1 second, the process froze. Then, he left the computer opening. But when he came home from school 4 hours later, the computer was still stuck on the same screen. And every time when he starts up the computer, the same message appears. In cases like this, people will be wondering how they can avoid the auto check on startup and how to recover files after check disk was stuck.

How to Recover Data after CHKDSK

I’ll teach you how to recover data in detail in the following content.

Recover Data from External Hard Disk

1. Choose a proper edition of Power Data Recovery.

• If you are worried about the performance, please use the Trial Edition first.
• If you need to recover data immediately but don’t have special requirements, please choose the Personal Edition.
• If you need to recover data in a business environment, please select a license for the business.

Click to see the comparison of different license types and click on the corresponding button to buy.

MiniTool Power Data Recovery TrialClick to Download100%Clean & Safe

2. Download & install the data recovery software.

Download the software and run the setup program to install the data recovery software to your computer.

You should copy & paste your license key into the text box to register first if you are using the advanced edition.

3. Choose the certain disk type.

You need to specify the type of the disk needs to be scanned. For instance, to recover data from the local drive, you should click on “This PC”.

4. Select the target drive to scan.

You’ll see a list of all disks available in the column you have selected. At this time, you must select the one on which the error message appears. Then, click on the “Scan” button in the lower right corner to start detecting files.

5. Select the files you need to recover.

You may browse the scan results during or at the end of the scan. Please make sure which files you need and check them to recover by pressing the “Save” button. Then, set a storage path for them and click on the “OK” button to confirm your selection.

Click to Tweet

This method also works for the data recovery from the internal hard disk that is working well

Restore Data from Non-bootable Internal Hard Drive

How to recover data from non-booting computer? You need a bootable edition of MiniTool Power Data Recovery. Of course, you also need to choose a license type for it. The trial edition is not suitable anymore in this case since it is only able to scan the files for you, not recover. (I’ll take Personal License as an example in the rest steps; other license types are basically the same)

Please install the Personal Edition to another computer that works fine. Then, use it to make a bootable disk within a few clicks (see “How to make a Boot Disk?” in part 2 of Data Recovery From Corrupted Internal Hard Disk – Ultimate Guide).

1. Restart your computer and press corresponding button to enter the BIOS. Then, change the boot order of your computer to make this boot disk the first boot device. After that, exit BIOS and save changes.

2. After a while, you’ll see the picture shown below. At this time, you may choose to change the screen resolution or not.

3. Afterwards, the following software launching prompt window will appear. You should choose to run MiniTool Power Data Recovery.

4. Then, select the first option in the MiniTool PE Loader window.

5. Now, you’ll be brought to the main window of MiniTool Power Data Recovery and you should repeat step 3 ~ step 5 mentioned in the previous situation to finish the recovery.

Solutions – Fix Check Disk for Consistency Error

In general, the automatic disk check may appear when:

• The battery is loose or moved.
• The computer shuts down improperly or illegally.
• A sudden power outage occurs while the computer is running.
• The computer case is moved while the computer is running.
• A USB device is unplugged before the computer has a chance to finish the current activity with it.

Check Disk for Errors in Windows

When that happens, you should let the check run to see whether it can be finished and whether you can access your system after that. If you enter the OS successfully, you may check your hard disk for errors in Windows and try to fix them completely or you can test the hard disk with a diagnostic tool to find and solve the problem.

There are steps of how to check hard disk for errors in Windows 7.

Disable Disk Check on Startup in Windows

But, what if Windows run CHKDSK on every reboot? How to stop checking file system on C in Windows 7 or other systems? Those are questions that bother a lot of users.

Here, I’ll show 4 common ways to cancel a disk check on your Windows computer (take Windows 7 as an example).

Method one: disable the check in the registry editor.

1. Click on the start menu; then, type “regedit” into the search box and press “Enter”.
2. Right click on the regedit.exe appeared in the result list and choose “Run as administrator”.
3. Navigate to “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager”.
4. Locate and double-click on the “BootExecute” on the right pane.
5. Change the value from “autocheck autochk *” to “autocheck autochk /k:C *” (C refers to the letter of the drive on which disk check is performed).

Method two: make use of disk defragmenting.

1. Open Windows Explorer and find the drive on which check disk has been performed.
2. Right click on this drive and choose “Properties”.
3. Navigate to “Tools” tab and then click on “Defragment now” under “Defragmentation”.

Please note that you can also open the Command Prompt and type “chkdsk *: /f” (* stands for the target drive letter) to complete this task.

Method three: repair the file system error.

1. Restart the computer and hold down F8 button.
2. Choose to repair the computer.
3. Enter the command line mode.
4. Type “chkdsk *: /r /f” (* stands for the target drive letter).

Method four: format the disk.

If all the above methods fail, you will have to format the corresponding hard drive.

Click to Tweet

Conclusion

When you, unfortunately, run into “one of your disks needs to be checked for consistency” error, you must stay calm. Please remember that your data is always the most important thing of all. So you’re suggested to recover data first before you try any other ways to try to fix the check disk for consistency error (after all, “CHKDSK deleted my files” is not an individual case).

When you’re pretty sure that you have got all the data you need, you can try the methods I have mentioned above or other ways you have found on the internet to fix the error.