No device drivers were found при установке windows 11

This guide will make you aware of six different methods to Fix the Windows 11 no device drivers were found error. Now that the latest iteration of OS has been released in a stable state and most of the bugs have been ironed out, many users are looking forward to trying it out on their PC.

In this regard, there exist three different approaches through which you could perform the upgrade- from the Settings menu, via the Media Creation Tool, or by using an ISO file. While the first method passes by without any hiccups, it’s the second and the third methods that are causing quite a few issues.

When users are trying to install Windows 11 via a bootable USB (created either via the official Media Creation Tool or via a third-party app like Rufus), the installation seems to get stuck at the point when it’s time to install the drivers. Users are instead being greeted with the following error message:

“No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK”. If you are also getting bugged with this issue, then fret not. In this tutorial, we will show you numerous methods to Fix the Windows 11 no device drivers were found error. So without any further ado, let’s get started.

Fix 1: Switch to USB 2.0 Port

While the USB 3.0 Port does give a faster read/write speed, however, in some environments, such as in Windows Recovery or BIOS, your system might not be able to identify the device connected to this port.

Therefore, it is recommended to connect your USB drive to the tried and tested 2.0 port. So try out this tweak and then check if it Fixes the Windows 11 no device drivers were found error.

Fix 2: Use a Standalone USB for Drivers

Windows packs in all the required drivers along with the OS, but as of now, the system is unable to unpack and install these drivers from the ISO file. So your next course of action should be to create a standalone bootable USB device, put in only the drivers there, and then try installing the drivers from that secondary USB. Here’s how:

1. To begin with, create a second bootable USB device using third-party software like Rufus.
2. Then download the SATA drivers corresponding to your chipset: AMD | Intel
3. Now transfer the driver files over to this second USB device.
4. After that, start off the installation using the primary USB device that has the ISO file.
5. Once it throws up the “no device drivers were found” error, connect the second USB device that has the driver file.
6. Now click OK to close the error message. Then click Browse, navigate to the driver files present in the second USB device, and hit OK.
   
7. The drivers will now be loaded and subsequently installed. And with that, it should also Fix the no device drivers were found error on Windows 11.

Fix 3: Manually Set the Active Partition

The issue could also be attributed to the fact that the system is unable to identify the active partition and hence install the drivers. Hence you will have to manually let it know of the same so that it could then proceed ahead with the installation. Here’s how:

1. To begin with, insert the bootable USB drive to your PC that has the ISO setup file.
2. Then restart your PC and start again with the installation process. Once you reach the Choose an option screen, click on Troubleshoot.
   
3. After that, click on Advanced Options followed by Command Prompt.
   
4. Now execute the following five commands (one at a time) in this CMD window. Make sure to replace X with the disk and partition name where you are installing the OS:
   

   diskpart
   list disk
   select disk X
   list partition
   select partition X

   

5. Now that you have selected the desired partition, just execute the below command to make it the active one:

   active

6. Once that is done, you may close the CMD window and proceed ahead with the rest of the installation. Check if it manages to Fix the device drivers not found issue.

Fix 4: Enable xHCI hand-off in BIOS

The extensible Host Controller Interface (xHCI), lays down the guidelines for the interaction of the USB 3.0 controller hardware and software. When it is enabled, BIOS gives full authority to the OS to manage the said ports. On the other hand, if you disable it, then BIOS has total control and the OS has no say in the handling and control of the ports.

In the current scenario, many users were able to achieve success after giving the authority to the OS. In other words, they were able to rectify the device driver issues by enabling XHCI hand-off from BIOS. So let’s enable the Host Controller and then check out the results.

1. Start by powering off your PC. Then turn it back on, and as soon as it is booting up, continuously press the Esc key. 
2. This shall bring up the Startup menu. Press F10 to select the BIOS menu from there. Your PC will now boot to the BIOS.
   
3. From there, go to the Advanced tab and scroll to the USB Configuration section.
4. You should now see the BIOS xHCI Hand-Off or BIOS EHCI Hand-OFF option, change its state to Enabled.
   
   
5. Once done, save the changes and then restart the installation process. Check if the Windows 11 no device driver error has been fixed or not.

Fix 5: Disable Secure Boot from BIOS

Secure Boot is basically a security mechanism put in place by Microsoft that verifies the credibility of each driver that is being installed or loaded at boot time. However, in rare instances, it might raise a false positive and could prevent the installation of legitimate drivers as well. The only way to verify and hence rectify this issue is to disable this security check (aka Secure Boot).

1. So start off by booting your PC to the BIOS, as explained above.
2. Then go to the Security tab and you should see the Secure Boot option. Change its state to Disabled and then save the changes.
   
3. However, If the Secure Boot option is not there, then check for it under the Boot/Authentication/System configuration section and then disable it.
4. Once done, restart the PC and you should get the Operating System Boot Mode Change prompt. Type in the requested code and hit Enter to verify the changes that you have made to the BIOS.
   
5. Now proceed ahead with the setup and verify whether the Windows 11 no device drivers were found error stands Fixed or not.

Fix 6: Clean Install Windows 11

If none of the aforementioned methods managed to spell out success, then it could be the case of bad sectors or corrupt data on your C drive. Hence the only way out is to perform a clean install of Windows 11, which will delete all the data in the process. So if you wish to take this route, then take a backup beforehand and then refer to the below instructions.

1. Boot your device to the Windows 11 setup via the bootable USB Device that has the ISO file.
2. Once you reach the Windows Setup screen, press the Shift + F10 shortcut keys to open the Command Prompt.
3. Then execute the below two commands in the CMD window to bring up the list of the Disk Drive names

   diskpart
   list disk

4. After that, type in the below command to select the partition where the OS needs to be installed. Make sure to replace the X keyword accordingly:

   select disk X

   

5. Finally, execute the below command to wipe the selected disk:

   clean

6. Once the drive has been formatted, restart the installation procedure. This time you shouldn’t get the device driver issues.

Conclusion

So with this, we round off the guide on how you could Fix the Windows 11 no device drivers were found error. We have listed six different methods for the same. Do let us know in the comments section which one worked out in your favor.

If you’ve any thoughts on Fix – Windows 11 No Device Drivers Were Found Error, then feel free to drop in below comment box. Also, please subscribe to our DigitBin YouTube channel for videos tutorials. Cheers!

While installing Windows 11 or Windows 10, if you get No device drivers were found error, here is how you can fix the issue. It happens when you try to clean install Windows 11/10 on your computer. Although it doesn’t appear frequently, you can troubleshoot the problem if you are getting it.

No new devices drivers were found. Make sure that the installation media contact the correct drivers, and then click OK.

The error means Windows didn’t find the correct drivers to go ahead with the installation, which can happen for many reasons. For instance, your installation driver might be corrupted or not signed, you are trying to install unsupported drivers, or Windows is having trouble verifying the drivers. The error occurs during Windows installation when the user tries to install drivers along with Windows setup.

If this problem occurs, you cannot fix it by clicking the corresponding OK button. If your selected hard drive becomes inactive, there is a chance of getting this error. On the other hand, a corrupted ISO file can also cause this issue. Therefore, follow this article to get rid of the issue you are getting while installing Windows 11 or Windows 10.

The Windows installation window allows you to select the correct device drivers. Alternatively you can try using a fresh copy of the driver to complete your Windows Installation. To fix the No device drivers were found error, during Windows installation, you can use one of these suggestions:

1. Make Partition active
2. Format Hard drive
3. Browse to Add Device Driver
4. Create fresh bootable USB

To learn more about these steps, continue reading.

1] Make Partition active

It is the first thing you need to follow in order to fix the aforementioned issue. For that, you must continue using the bootable USB you have made earlier to clean install Windows OS. Then, follow these steps:

• Make sure you are in the boot manage and the installation wizard is opened.
• Choose the language and click the Next button.
• Click on the Repair your computer option.
• Go to the Advanced options and select Command Prompt.
• Enter the password and click the Continue button.
• Enter these commands:

diskpart
list disk
select disk [disk number]
list partition
select partition [drive-letter]
active

After that, restart the installation process.

Hopefully, you won’t have any problem. However, if it doesn’t help, you can follow the next solution.

2] Format Hard drive

If there is some problem with the hard drive, you might have the same problem while installing Windows 11 or Windows 10. Whether it is an SSD or HDD, the problem will remain the same. To fix that issue, you need to format your hard drive. For that, do the following:

• Open the install wizard > choose the language > click the Next button.
• Click on the Repair your computer option.
• Navigate to Advanced options > Command Prompt.
• Enter the password and click the Continue button.
• Enter these commands:

diskpart
list disk
select disk [disk-number]
clean
create partition primary
format fs=ntfs quick

Then, you need to close all windows and restart the installation process.

3] Browse to Add Device Driver

The error means that your drivers are not readable, signed, or corrupt. Hence, manually downloading the driver files and adding them to your bootable USB drive would be a good idea. So you can manually select the driver files while installing Windows at a later stage.

Here is a step-by-step guide:

• First, you must download the chipset or storage drivers from your computer manufacturer’s website. For laptops and pre-built PCs, the manufacturer would be the company. For a custom PC, the manufacturer would be the motherboard company.
• To download the drivers go to the OEM’s website and search for the drivers using the model number.
• Once drivers are downloaded, extract them inside your bootable USB Driver.
• After that, boot up your PC using the USB Driver, usually as you do.
• Once you reach the screen where you received the error, choose the browse button.
• Now, select the inf files and click Ok.
• Finally, Windows will verify the driver files and let you complete the installation.

Once the setup is complete, you can go to the device manager and verify if the driver was installed on the PC. Though we still believe installing a driver post-installation is a better choice. However, if you are testing a setup disk, then it’s worth doing it.

4] Create fresh bootable USB

If none of the above-mentioned solutions worked for you, you might need to create a fresh bootable USB drive of Windows 11 or Windows 10. You have multiple options in your hands. For example, you can create a bootable Windows 11 installation media by downloading the Windows 11 ISO, using Media Creation Tool, etc. Either way, you need to create a clean installation media and perform a fresh installation.

Related: A media driver your computer needs is missing.

How do you fix No drivers are installed for this device?

If you get No drivers are installed for this device error in the Device Manager, you need to install the corresponding driver. For example, if you are getting this error for the graphics card, you need to install the graphics driver. Similarly, you need to perform the same thing for audio driver, Wi-Fi driver, or any other.

What is a Signed Device Driver?

A signed device driver is a driver that has been digitally signed by the manufacturer or developer to indicate that the driver works with the Windows version. This is important because it ensures that the driver is not corrupted or altered. If not, then it can cause problems with the PC. To use a signed device driver in Windows, the driver must be signed with a digital certificate recognized by Microsoft. This certificate is used to verify the driver developer’s identity and ensure that the driver has not been tampered with. That said, if you try to install a driver from a non-verified website, Windows will warn you about its legitimacy. It is advised never to install a driver from unknown sources.

How do you tell if a Driver is Signed?

If you have downloaded a driver, and want to check if the driver is signed, then you can use the sigverif tool in Windows. When you launch the Sigverif tool, go to the advanced option and then use the browser button to select the driver package you need to verify. Sigverif will scan the driver package and verify the signatures of all the drivers included in the package. If any of the drivers are not signed, Sigverif will display a message indicating that the driver is not signed and may not work correctly with your system.

How do I fix No device drivers found during Windows 11/10 installation?

To fix No device drivers found during Windows 11/10 installation error, you need to follow the above-mentioned solutions. First, you have to make the partition active so that it can be used for installing Windows 11/10. Secondly, you can format the hard drive. Last but not least is that you can create a fresh Windows 11/10 installation media.

That’s all! Hope this guide helped.

Read: No audio input device found on Windows.

1. Почему возникает ошибка?
2. 3 способа решения ошибки

В процессе установки Windows могут возникать различные сбои. Распространенная ошибка при инсталляции ОС — Драйверы устройства не найдены. Она может появляться из-за разных причин. Разберем основные источники неполадки и пути ее решения.

Почему возникает ошибка?

В большинстве случаев источником проблемы являются либо повреждения ISO-образа или носителя, с которого осуществляется установка, либо отсутствие в инсталляторе необходимых драйверов для оборудования. В первой ситуации для устранения ошибки нужно повторно скачать образ и записать его на флешку. Во втором случае найти нужные для работы устройств компоненты и загрузить их в инсталлятор.

3 способа решения ошибки

Рассмотрим 3 основных метода устранения неполадки для разных случаев.

1. Повторная загрузка и запись образа

Первое, что можно попробовать для решения ошибки, это перезапись установочного образа на флешку. При возможности, для этого лучше использовать другой накопитель, чтобы исключить возможные проблемы с носителем, который использовался ранее. Чтобы избежать повреждения образа, его нужно скачивать с официального сайта Microsoft. После загрузки следует убедиться, что файл загружен до конца и без ошибок.

Затем нужно записать ISO-образ на внешний носитель. Для этого существует множество программ. Рассмотрим процесс записи на примере популярной утилиты Rufus.

В окне приложения выберите используемую флешку, загруженный образ, файловую систему и метку тома. В разделе Схема раздела нужно выбрать пункт GPT, так как использование таблицы MBR на установочном носителе может быть одной из причин возникновения ошибки. Нажмите на кнопку СТАРТ, чтобы начать запись. Программа уведомит об успешном завершении процесса.

2. Использование другого порта USB

При появлении ошибок во время установки Windows можно попробовать подключить загрузочную флешку в другой USB-разъем и провести инсталляцию в такой конфигурации. Неисправность внешних портов нередко становится причиной возникновения подобных проблем. Стоит также попробовать использовать разъем USB 2. 0 вместо USB 3. 0, если ранее использовался порт третьей версии. Разъемы 3. 0 выделены синим цветом, в то время как порты USB 2. 0 имеют темно-серый оттенок.

3. Загрузка драйверов SATA/AHCI

Если перечисленные способы решения не помогли, можно попробовать другой метод устранения ошибки — загрузка драйверов SATA/AHCI. Их нужно найти и скачать в Интернете. Если вы используете ноутбук, то для этого нужно искать драйвера SATA или AHCI по точной модели переносного устройства. Если речь о ПК, проводить их поиск следует с моделью материнской платы. Искать нужно именно драйвера на SATA/AHCI для конкретного устройства (ноутбука или материнской платы), а не ПО для комплектующего в целом.

После нахождения и загрузки драйверов скопируйте их на отдельный внешний носитель (флешку или переносной жесткий диск). Затем перезагрузите компьютер и начните установку в обычном режиме. При появлении окна с ошибкой Драйверы устройства не найдены кликните на кнопку ОК в диалоге с уведомлением и нажмите на пункт Обзор в установщике. Укажите путь к носителю, на который записаны драйвера для SATA/AHCI. Если системе удастся корректно определить их, вы сможете нажать на кнопку Далее и продолжить инсталляцию в нормальном режиме.