Netsend в командной строке windows 10

Была ли эта статья полезной?

Microsoft Windows provides an effortless method for sending messages to other computers on the local network, called Net Send. In this article we will show you how to make the most of this feature.

How to send a message to another PC on a local network?

If you wish to send a message to another computer in your network, follow these steps:

• Start command prompt (cmd) – type cmd in the searchbox and run the app
• Type the following command as:

msg /SERVER:DestinationPC * /TIME:60 “This is the message to be sent to a PC named DestinationPC and closes in 60 seconds."

• You will need to replace DestinationPC with the name of the desired PC (you can find this in the list of computers that are currently sharing your network, if you don’t already know the PC name).
• Now, replace the value for TIME with how long you want the message to appear on the other screen for. For example TIME:30 for 30seconds
• Then replace the text between the quotation marks and the message you want to send.
• Finally, you can hit enter, and the message will be sent.

How to use Net send to send messages?

Here is the first alternative way of sending messages that may work if you have an older version of Windows. Here’s how:

• Click Start > Run.
• Type cmd, and press Enter
• In the window that opens, type Net send followed by the computer’s name to which you wish to send the message.
• Next, enter the message. For example, the format should resemble «Net send PC01 can you read this message?»

How to send messages with cmd prompt?

It is easy to send messages through cmd prompt to other systems here is the answer first we have to set our systems messenger ACTIVE. For it, follow these steps:

• 1. Go to RUN
• 2. Type

  services.msc

• 3. Scroll down and right click on MESSENGER
• 4. Select PROPERTIES
• 5. Then for enabling it go to STARTUP TYPE and select AUTOMATIC
• 6. Then OK

And this should be performed on both sides (SENDER & RECEIVER). After that if you want to send message then do the following steps:

• 1. Go to cmd prompt
• 2. Type syntax as follows:

   net send <ipaddress of reciever>  <message to be send>

Ex:

net send 172.16.6.99 "hello" 

How to fix Error 5, Error 1825

When using the msg command, the following error may occur: Error 5 when getting session names or Error 1825 when getting session names.

These error messages indicate a failure in the connection to the recipient of the message. To correct these errors, you need to act on the side of the recipient. Run the command regedit to open the registry editor on the recipient’s computer and navigate to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server

Here change AllowRemoteRPC from 0 to 1.

Do you need more help with Windows? Check out our forum!

The net send command is a Command Prompt command used to send messages to users, computers, and messaging aliases on the network. It’s one of many net commands.

Net Send Command Availability

The net send command is available from within the Command Prompt in Windows XP, as well as in older versions of Windows and in some Windows Server operating systems.

Windows XP was the last version of Windows to include the net send command, so it’s not available in Windows 11, Windows 10, Windows 8, Windows 7, or Windows Vista. Instead, the msg command replaces the net send command in those versions of Windows.

The availability of certain net send command switches and other net send command syntax may differ from operating system to operating system.

Net Send Command Syntax

net send {name | * | /domain[:domainname] | /users} message [/help] [/?]

Net Send Command Examples

Here are some examples that show how to use the net send command:

Send to All Workgroup Users

net send * Please proceed to CR103 immediately for a mandatory meeting

In this example, net send is used to send the Please proceed to CR103 immediately for a mandatory meeting message to all the members * of the current workgroup or domain.

Send to All Server Users

net send /users "Will the person with the A7/3 client file open please save your work and close it? Thank you!"

Here, the command is used to send all the members of the current server /users the message Will the person with the A7/3 client file open please save your work and close it? Thank you!. The message is in quotes because a slash was used.

Send to All Users in Specific Domain

net send /domain:abcd This is just a tornado drill

Net send is used in this example to message all users in the abcd domain that This is just a tornado drill.

Send to Specific User

net send smithm You're Fired!

While it’s a completely unprofessional way to terminate someone’s employment, in this example, the net send command is used to send the user smithm a message he probably didn’t want to hear: You’re Fired!.

Net Send Related Commands

The net send command is a subset of the net command and so is similar to its sister commands like net use, net time, net user, net view, etc.

More Help With the Net Send Command

If this command isn’t working, you might see the following error in Command Prompt:

'net' is not recognized as an internal or external command, operable program or batch file.

There are two ways to fix this, but only one is a permanent solution…

You can move the current working directory to be System32, the path where the cmd.exe file is located, so that Command Prompt knows how to run the command. Do this with the cd (change directory) command:

cd c:\windows\system32\

From there, you can run the command without seeing that error. However, this is only a temporary solution that you’ll have to do all the time for every command. The real problem is that the current environment variable hasn’t been set up correctly.

Here’s how to restore the proper environment variable necessary for Command Prompt to understand your commands in Windows XP:

1. Open the Start menu and right-click My Computer.

2. Choose Properties.

3. Select the Environment Variables button from the Advanced tab.

4. Select Path from the list of variables in the System Variables section.

5. Choose Edit below the System Variables section.

6. In the Variable value text box, look for any paths that read exactly like this:

   C:\Windows\system32
   

   or…

   %SystemRoot%\system32
   

7. You should only have one in there, but if you have neither, then go to the very end of the text, type a semicolon, and then enter the top path from above, like this:

   ;C:\Windows\system32
   

   Is one already in there? If so, it’s most likely the second one that reads «%SystemRoot%» at the beginning. If so, change that part of the path to be «C:\Windows\system32» (so long as your Windows installation is on the C: drive, which is most likely true).

   For example, you’d change %SystemRoot%\system32 to C:\Windows\system32.

   If it helps, copy all the text into Notepad and do the editing there. When you’re done, just paste the edited variable value back into that text box to overwrite the existing text.

   Don’t edit any other variables. If there happens to be no variables in this text box, then you can enter the above path without the semicolon since it’s the only entry.

8. Select OK a few times to save the changes and exit the System Properties window.

9. Restart your computer.

If net send commands appear to work in Command Prompt with a «successful» message, but the pop-up doesn’t show up on the computers the message is sent to, check that the receiving computers have the Messenger service enabled.

To enable this service in Windows XP, go to Start > Run, enter services.msc, double-click Messenger, change Startup type to Automatic, and then go to Apply > Start.

You can also enable the Messenger service from the command line:

sc config messenger start=auto
net start messenger

Thanks for letting us know!

You can use the net send command to send messages to other computers on your network. The command is used through the Command Prompt. You can open the Command Prompt from the Start menu or by pressing ⊞ Win + R and typing “cmd”. If you are using Windows Vista, 7, 8, 8.1, or 10, see the next section.

How use Net Send in cmd?

In order to send a message using Net Send command, start a command prompt window. To start the command prompt click “Start” button, choose “Run..”, enter “cmd” command and click OK button. Type “net” command with “send” parameter and with other parameters according to the command syntax.

What is net send command?

Net Send is a command within the Microsoft Windows XP Professional operating system’s Messenger Service. Net Send allows messages to be sent to network computers, users and messaging names. MSG.exe replaced Net Send, as Messenger Service is not supported by Windows Vista and Windows Server 2008.

Does Net Send still work?

Net send is no longer used; it wasn’t used in Windows Vista either. Try using the msg command, instead. You can find more information here. The MSG command is only available on Ultimate and Business versions!

Does Windows 10 have net send?

The net send command is a Command Prompt command used to send messages to users, computers, and messaging aliases on the network. The msg command replaces the net send command in Windows 10, Windows 8, Windows 7, and Windows Vista. The net send command is one of many net commands.

What is the net command in Windows?

The net computer command is used to add or remove a computer from a domain. Use the net config command to show information about the configuration of the Server or Workstation service. The net continue command is used to restart a service that was put on hold by the net pause command.

How can I send a message to another computer using WIFI?

If you wish to send a message to another computer in your network, click Start > Run. Type cmd, and press Enter. In the window that opens, type Net send followed by the name of the computer to which you wish to send the message. Next, enter the message.

Can I send message to IP address?

How we can send a message to an IP address? If you mean you want to send something akin to a text message, in short you cannot. Well, you can, but unless there is something (e.g. an app) to receive it, the computer attached to the IP address will ignore it.

How do I send messages on Windows 10?

Sending a message

1. On your PC, in the Your Phone app, select Messages.
2. To start a new conversation, select New message.
3. Enter the name or phone number of a contact.
4. Select the person you want to send a message to. A new message thread opens for you to begin with.

What is net Exe used for?

The net.exe command is used to fix, update, or view the network or the network settings. Net.exe is available in Windows 95, Windows 98, Windows NT, Windows ME, Windows 2000, Windows XP, Windows Vista and Windows 7. The net.exe command can be used to stop and start the IPv6 protocol.

What is persistent yes?

/persistent:Yes: Makes the connection you’re currently creating persistent. Future connections you make using the command during the same session are also persistent (you don’t need to keep using the switch) until you use the /persistent:No switch to turn it off. /persistent:No: Turns off the persistency toggle.

How can I use NET SEND on my computer?

Open the Command Prompt. You can use the net send command to send messages to other computers on your network. The command is used through the Command Prompt. You can open the Command Prompt from the Start menu or by pressing ⊞ Win+R and typing “cmd”. If you are using Windows Vista, 7, 8, 8.1, or 10, see the next section.

How to send a message in net command?

To send NET SEND messages, you need to open a Command Prompt and use the NET command with send parameter. Go to the Start menu, click Run, type cmd, and hit ENTER.

What do I need to know about NET SEND?

Learn more… Net Send is a command line tool used in Windows XP for sending messages to other users and computers on a local network. With Windows Vista, Net Send was replaced with msg.exe, a command line tool that has very similar functionality and syntax.

How to use NetSend to send a message?

First of all click “Start” button, choose “Run..” and enter “cmd” command. Black screen of cmd.exe will appear. Netsend command syntax cmd looks like: Can be user name, PC name, or messaging name to send the message to. If the name is a computer name that contains blank characters, it need to be enclosed the alias in quotation marks (” “).

Open the Command Prompt. You can use the net send command to send messages to other computers on your network. The command is used through the Command Prompt. You can open the Command Prompt from the Start menu or by pressing ⊞ Win+R and typing “cmd”. If you are using Windows Vista, 7, 8, 8.1, or 10, see the next section.

To send NET SEND messages, you need to open a Command Prompt and use the NET command with send parameter. Go to the Start menu, click Run, type cmd, and hit ENTER.

Learn more… Net Send is a command line tool used in Windows XP for sending messages to other users and computers on a local network. With Windows Vista, Net Send was replaced with msg.exe, a command line tool that has very similar functionality and syntax.

First of all click “Start” button, choose “Run..” and enter “cmd” command. Black screen of cmd.exe will appear. Netsend command syntax cmd looks like: Can be user name, PC name, or messaging name to send the message to. If the name is a computer name that contains blank characters, it need to be enclosed the alias in quotation marks (” “).