Не отображаются приложения в автозагрузке windows 10

Судя по тому, что вы читаете этот текст, вы дочитали эту статью до конца. Если она вам понравилась, поделитесь, пожалуйста, с помощью кнопок ниже. Спасибо за вашу поддержку!

Autoplay can be a useful feature, but it appears that Windows 10 users are having some issues with it. According to users, Autoplay isn’t working on Windows 10 for some strange reason, so is there a way to fix it?

There is a way to fix it, and we’re going to show you exactly how, in this article.

How can I fix Autoplay if it isn’t working in Windows 10?

There are various problems with Autoplay that can occur, and in this article, we’re going to cover the following issues:

• Autoplay not working when the camera is connected, external hard drive, pen drive – Many users reported that the Autoplay feature isn’t working on their PC. According to them, this problem affects cameras, external hard drives, pen drives, as well as other removable storage.
• Autoplay enabled but not working – Users reported that the Autoplay feature is enabled on their PC, but it’s not working for some reason. If you have that problem, you might be able to solve it with one of our solutions.
• DVD ROM, removable disk Autoplay not working – This problem can also appear with DVD and removable disks. There are a few ways to fix this problem, so be sure to try out the solutions from this article.
• USB Autoplay not working Windows 10 – This is a relatively common problem with USB devices and Windows 10. However, this isn’t a major issue and it can be easily resolved.
• Autoplay not working SD card Windows 10 – Users reported that the Autoplay feature isn’t working with their SD card. This can be a problem if you want to transfer pictures from your digital camera to your PC.

1) Reset the Autoplay settings

So, the first thing we’re going to try is resetting the Autoplay settings in Windows 10. If you’re not sure how to do that, just follow these steps:

1. Press Windows Key + S and enter the Control Panel. Now select Control Panel from the list of results.
   
2. When Control Panel opens, click on AutoPlay.
   
3. In AutoPlay settings make sure that you check Use AutoPlay for all media and devices.
4. Next, click the Reset all defaults button. Your Autoplay settings should be reset to default.
   

Most users don’t know what to do when the Windows key stops working. Check out this guide and be a step ahead.

You can’t open Control Panel? Take a look at this step-by-step guide to find a solution.

You can also change your Autoplay settings from the Settings app. To do that, just follow these steps:

1. Open the Settings app. You can do that quickly by pressing Windows Key + I shortcut.
2. When the Settings app opens, go to Devices section.
   
3. Select AutoPlay from the menu on the left and in the right pane select Ask me every time for both Removable drive and Memory card.
   

After making these changes, check if Autoplay is working again.

Want to know more about Autoplay settings and how to manage them? Check out this awesome article.

2) Check Registry Editor values

Windows 10 manages Autoplay settings using the registry and speaking of the registry, there’s one specific key that is in charge of Autoplay settings.

Sometimes this key can be changed when you install new antivirus software, so let’s check this key and see if it has been changed:

1. Open Registry Editor. You can open Registry Editor by pressing Windows Key + R and typing regedit. After typing regedit press Enter to run it.
   
2. When Registry Editor opens in the left pane navigate to the following registry key:

   • HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer

     

3. Find the NoDriveTypeAutoRun value name in the right pane and double click it.
   
4. If the data is not 0x00000091 (145), set Value data to 91. Click OK to save changes.
   
5. Now go to the following key in the right pane:

   • HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer

6. Search for NoDriveTypeAutoRun value. If that value exists change its data like we explained in steps 4-6 using the same numbers.

If you can’t find the values we mentioned in Step 7 and Step 8, don’t worry. This is actually a good thing, and it means that those values weren’t changed.

If changing the registry seems a bit complicated, you can just download .reg files, execute them and add changes to the registry automatically. Just download these files:

• Set Default NoDriveTypeAutoRun for Current User
• Set Default NoDriveTypeAutoRun for Local Machine

After downloading them, just run them both to add them to the registry. We also have to mention that there’s one more value in Registry Editor that can cause Autoplay issues on Windows 10.

1. Follow Steps 1 to 3 from this solution to open Registry Editor and to navigate to Explorer key.
2. Now in the right panel, there should be NoDriveAutoRun value. This value can sometimes affect Autoplay options if it’s not set to 0, so double click it.
3. Now set the Value data to 0 and click OK to save changes.
   

After you’ve made changes to the Registry, restart your computer and check if the issue is resolved.

If you can’t edit your Windows 10’s registry, read this handy guide and find the quickest solutions to the issue.

Can’t access the Registry Editor? Things aren’t as scary as they seem. Check out this guide and solve the issue quickly.

3) Check Shell Hardware Detection Service

Shell Hardware Detection Service is in charge of Autoplay functions and if Autoplay isn’t working on Windows 10, maybe Shell Hardware Detection Service isn’t running, as well, so let’s see if we can fix that:

1. Press Windows Key + R and type services.msc. Press Enter to run it.
   
2. When the Services window opens locate the Shell Hardware Detection and double click it to open its properties.
   
3. Now locate the Startup type section and from the dropdown choose Automatic.
   
4. If the service isn’t running click Start and then OK to save changes.

After changing the startup type of this service, the problem should be resolved.

Most users don’t know what to do when the Windows search box goes missing. Read this article to learn how you can get it back in just a couple of steps.

4) Change notification settings

According to users, you might be able to fix this problem simply by changing your notification settings. Users reported that their AutoPlay notifications were disabled and that caused this error to appear. To fix the issue, you need to do the following:

1. Open the Settings app and go to the System section.
   
2. In the menu on the left select Notifications & actions. In the right panel, scroll down to the Get notifications from these senders section. Now locate AutoPlay and make sure that it’s enabled. If not, be sure to enable it.
   

Once you made these changes, check if the problem with AutoPlay still persists.

Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken.
We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
Click here to download and start repairing.

If you’re having trouble opening the Setting app, take a look at this article to solve the issue.

5) Make changes to the Group Policy

Another way to fix this issue is to make changes to Group Policy. Group Policy is a useful tool that allows you to configure various system settings. To start Group Policy Editor and fix Autoplay issues, you need to do the following:

1. Press Windows Key + R and enter gpedit.msc. Press Enter or click OK.
   
2. In the left pane, navigate to Computer Configuration > Administrative Templates > Windows Components > Autoplay Policies. In the left pane, locate and double click on Turn off Autoplay.
   
3. Select Disabled from the menu and click on Apply and OK.
   

After making these changes, the problem should be resolved and AutoPlay will start working again. Few users reported that they had to change this setting for User Configuration instead of Computer Configuration.

To do that, you need to repeat the same steps, but instead of going to the Computer Configuration, you need to go to the User Configuration section and follow the instructions above.

Most Windows 10 users have no idea how to edit the Group Policy. Learn how you can do it by reading this simple article.

You don’t have the Group Policy Editor on your Windows PC? Get it right now in just a couple of easy steps.

6) Disconnect all USB devices

According to users, if Autoplay is not working, the problem might be your USB devices. Users reported that they had a connected USB flash drive that caused this problem to appear.

According to them, the drive was used as a SpeedBoost drive, and while the drive was connected the Autoplay didn’t work with cameras and other devices.

After disconnecting the flash drive the issue was resolved and Autoplay started working for all devices.

7) Use Command Prompt

If Autoplay is not working on your PC, you might be able to fix it simply by using Command Prompt. To do that, follow these steps:

1. Press Windows Key + X to open Win + X menu. Now select Command Prompt (Admin) from the list. If Command Prompt isn’t available, you can use PowerShell (Admin) instead.
   
2. When Command Prompt opens, enter net start shellhwdetection command and press Enter to run it.
   

After running this command, you just have to restart your PC and the problem should be completely resolved.

If you’re having trouble accessing Command Prompt as an admin, then you better take a closer look at this guide.

Turn Autoplay off and on

If you still have problems with Autoplay, you might be able to fix them simply by turning Autoplay off and turning it back on again. This is rather simple and you can do it by following these steps:

1. Open the Settings app and go to Devices > AutoPlay.
2. In the right pane, locate Use AutoPlay for all media and devices option and turn it off.
   
3. Wait for a couple of moments and turn this feature back on again.

You can also turn this feature off from Control Panel. To do that, you need to do the following:

1. Open Control Panel and go to the AutoPlay section.
2. When the AutoPlay window opens, uncheck Use AutoPlay for all media and devices.
   
3. Wait for a few moments and turn this option back on again.

Both of these methods will disable the Autoplay feature, so feel free to use any of them.

After doing that, check if Autoplay is working on your PC. Few users are suggesting to restart your PC after you turn off the AutoPlay feature, so you might want to try that as well.

9) Install the latest updates

If you still have this problem, you might be able to solve it by installing the latest updates. Windows 10 usually installs updates automatically, but sometimes you might skip an important update.

If this happens, you can check for updates manually by doing the following:

1. Open the Settings app and go to the Update & Security section.
   
2. Now click on Check for updates button.

If any updates are available, Windows will install them in the background. After your Windows 10 is up to date, check if the issue still persists.

Having trouble updating your Windows? Check out this guide that will help you solve them in no time.

That’s about it, we hope at least one of these solutions helped you to solve the problem with Autoplay in Windows 10.

As always, leave all your questions and suggestions in the comments section below.

Autoplay can be a useful feature, but it appears that Windows 10 users are having some issues with it. According to users, Autoplay isn’t working on Windows 10 for some strange reason, so is there a way to fix it?

There is a way to fix it, and we’re going to show you exactly how, in this article.

How can I fix Autoplay if it isn’t working in Windows 10?

There are various problems with Autoplay that can occur, and in this article, we’re going to cover the following issues:

• Autoplay not working when the camera is connected, external hard drive, pen drive – Many users reported that the Autoplay feature isn’t working on their PC. According to them, this problem affects cameras, external hard drives, pen drives, as well as other removable storage.
• Autoplay enabled but not working – Users reported that the Autoplay feature is enabled on their PC, but it’s not working for some reason. If you have that problem, you might be able to solve it with one of our solutions.
• DVD ROM, removable disk Autoplay not working – This problem can also appear with DVD and removable disks. There are a few ways to fix this problem, so be sure to try out the solutions from this article.
• USB Autoplay not working Windows 10 – This is a relatively common problem with USB devices and Windows 10. However, this isn’t a major issue and it can be easily resolved.
• Autoplay not working SD card Windows 10 – Users reported that the Autoplay feature isn’t working with their SD card. This can be a problem if you want to transfer pictures from your digital camera to your PC.

1) Reset the Autoplay settings

So, the first thing we’re going to try is resetting the Autoplay settings in Windows 10. If you’re not sure how to do that, just follow these steps:

1. Press Windows Key + S and enter the Control Panel. Now select Control Panel from the list of results.
   
2. When Control Panel opens, click on AutoPlay.
   
3. In AutoPlay settings make sure that you check Use AutoPlay for all media and devices.
4. Next, click the Reset all defaults button. Your Autoplay settings should be reset to default.
   

Most users don’t know what to do when the Windows key stops working. Check out this guide and be a step ahead.

You can’t open Control Panel? Take a look at this step-by-step guide to find a solution.

You can also change your Autoplay settings from the Settings app. To do that, just follow these steps:

1. Open the Settings app. You can do that quickly by pressing Windows Key + I shortcut.
2. When the Settings app opens, go to Devices section.
   
3. Select AutoPlay from the menu on the left and in the right pane select Ask me every time for both Removable drive and Memory card.
   

After making these changes, check if Autoplay is working again.

Want to know more about Autoplay settings and how to manage them? Check out this awesome article.

2) Check Registry Editor values

Windows 10 manages Autoplay settings using the registry and speaking of the registry, there’s one specific key that is in charge of Autoplay settings.

Sometimes this key can be changed when you install new antivirus software, so let’s check this key and see if it has been changed:

1. Open Registry Editor. You can open Registry Editor by pressing Windows Key + R and typing regedit. After typing regedit press Enter to run it.
   
2. When Registry Editor opens in the left pane navigate to the following registry key:

   • HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer

     

3. Find the NoDriveTypeAutoRun value name in the right pane and double click it.
   
4. If the data is not 0x00000091 (145), set Value data to 91. Click OK to save changes.
   
5. Now go to the following key in the right pane:

   • HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer

6. Search for NoDriveTypeAutoRun value. If that value exists change its data like we explained in steps 4-6 using the same numbers.

If you can’t find the values we mentioned in Step 7 and Step 8, don’t worry. This is actually a good thing, and it means that those values weren’t changed.

If changing the registry seems a bit complicated, you can just download .reg files, execute them and add changes to the registry automatically. Just download these files:

• Set Default NoDriveTypeAutoRun for Current User
• Set Default NoDriveTypeAutoRun for Local Machine

After downloading them, just run them both to add them to the registry. We also have to mention that there’s one more value in Registry Editor that can cause Autoplay issues on Windows 10.

1. Follow Steps 1 to 3 from this solution to open Registry Editor and to navigate to Explorer key.
2. Now in the right panel, there should be NoDriveAutoRun value. This value can sometimes affect Autoplay options if it’s not set to 0, so double click it.
3. Now set the Value data to 0 and click OK to save changes.
   

After you’ve made changes to the Registry, restart your computer and check if the issue is resolved.

If you can’t edit your Windows 10’s registry, read this handy guide and find the quickest solutions to the issue.

Can’t access the Registry Editor? Things aren’t as scary as they seem. Check out this guide and solve the issue quickly.

3) Check Shell Hardware Detection Service

Shell Hardware Detection Service is in charge of Autoplay functions and if Autoplay isn’t working on Windows 10, maybe Shell Hardware Detection Service isn’t running, as well, so let’s see if we can fix that:

1. Press Windows Key + R and type services.msc. Press Enter to run it.
   
2. When the Services window opens locate the Shell Hardware Detection and double click it to open its properties.
   
3. Now locate the Startup type section and from the dropdown choose Automatic.
   
4. If the service isn’t running click Start and then OK to save changes.

After changing the startup type of this service, the problem should be resolved.

Most users don’t know what to do when the Windows search box goes missing. Read this article to learn how you can get it back in just a couple of steps.

4) Change notification settings

According to users, you might be able to fix this problem simply by changing your notification settings. Users reported that their AutoPlay notifications were disabled and that caused this error to appear. To fix the issue, you need to do the following:

1. Open the Settings app and go to the System section.
   
2. In the menu on the left select Notifications & actions. In the right panel, scroll down to the Get notifications from these senders section. Now locate AutoPlay and make sure that it’s enabled. If not, be sure to enable it.
   

Once you made these changes, check if the problem with AutoPlay still persists.

Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken.
We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
Click here to download and start repairing.

If you’re having trouble opening the Setting app, take a look at this article to solve the issue.

5) Make changes to the Group Policy

Another way to fix this issue is to make changes to Group Policy. Group Policy is a useful tool that allows you to configure various system settings. To start Group Policy Editor and fix Autoplay issues, you need to do the following:

1. Press Windows Key + R and enter gpedit.msc. Press Enter or click OK.
   
2. In the left pane, navigate to Computer Configuration > Administrative Templates > Windows Components > Autoplay Policies. In the left pane, locate and double click on Turn off Autoplay.
   
3. Select Disabled from the menu and click on Apply and OK.
   

After making these changes, the problem should be resolved and AutoPlay will start working again. Few users reported that they had to change this setting for User Configuration instead of Computer Configuration.

To do that, you need to repeat the same steps, but instead of going to the Computer Configuration, you need to go to the User Configuration section and follow the instructions above.

Most Windows 10 users have no idea how to edit the Group Policy. Learn how you can do it by reading this simple article.

You don’t have the Group Policy Editor on your Windows PC? Get it right now in just a couple of easy steps.

6) Disconnect all USB devices

According to users, if Autoplay is not working, the problem might be your USB devices. Users reported that they had a connected USB flash drive that caused this problem to appear.

According to them, the drive was used as a SpeedBoost drive, and while the drive was connected the Autoplay didn’t work with cameras and other devices.

After disconnecting the flash drive the issue was resolved and Autoplay started working for all devices.

7) Use Command Prompt

If Autoplay is not working on your PC, you might be able to fix it simply by using Command Prompt. To do that, follow these steps:

1. Press Windows Key + X to open Win + X menu. Now select Command Prompt (Admin) from the list. If Command Prompt isn’t available, you can use PowerShell (Admin) instead.
   
2. When Command Prompt opens, enter net start shellhwdetection command and press Enter to run it.
   

After running this command, you just have to restart your PC and the problem should be completely resolved.

If you’re having trouble accessing Command Prompt as an admin, then you better take a closer look at this guide.

Turn Autoplay off and on

If you still have problems with Autoplay, you might be able to fix them simply by turning Autoplay off and turning it back on again. This is rather simple and you can do it by following these steps:

1. Open the Settings app and go to Devices > AutoPlay.
2. In the right pane, locate Use AutoPlay for all media and devices option and turn it off.
   
3. Wait for a couple of moments and turn this feature back on again.

You can also turn this feature off from Control Panel. To do that, you need to do the following:

1. Open Control Panel and go to the AutoPlay section.
2. When the AutoPlay window opens, uncheck Use AutoPlay for all media and devices.
   
3. Wait for a few moments and turn this option back on again.

Both of these methods will disable the Autoplay feature, so feel free to use any of them.

After doing that, check if Autoplay is working on your PC. Few users are suggesting to restart your PC after you turn off the AutoPlay feature, so you might want to try that as well.

9) Install the latest updates

If you still have this problem, you might be able to solve it by installing the latest updates. Windows 10 usually installs updates automatically, but sometimes you might skip an important update.

If this happens, you can check for updates manually by doing the following:

1. Open the Settings app and go to the Update & Security section.
   
2. Now click on Check for updates button.

If any updates are available, Windows will install them in the background. After your Windows 10 is up to date, check if the issue still persists.

Having trouble updating your Windows? Check out this guide that will help you solve them in no time.

That’s about it, we hope at least one of these solutions helped you to solve the problem with Autoplay in Windows 10.

As always, leave all your questions and suggestions in the comments section below.

Один из самых важных и интересных элементов Windows 10, это автозагрузка, ведь именно с неё начинается работа операционной системы. Я могу назвать вам несколько важных причин, почему это именно так:

1. Если ваш компьютер или ноутбук долго загружается, то автозагрузка покажет вам источник проблем, ведь автоматический запуск большого количества нужных и ненужных программ в разы увеличивает время загрузки операционной системы. 

2. Если вы не можете удалить вирус, то исключите его файлы из автозапуска и перезагрузитесь, после этого антивирус будет в состоянии удалить вредоносную программу. 

3. А может наоборот, вы хотите добиться автоматического запуска какой-либо программы, в этом случае добавьте ярлык исполняемого файла этого приложения в папку «Startup» и оно запустится вместе с OS.

Внимательный читатель заметит, что остановка запускаемых при старте системы программ представляет собой сложную задачу, так как не существует одного места, где это можно сделать. Некоторые программы находятся в папке «Startup» и поэтому стартуют вместе с операционной системой, вторые — находятся в планировщике заданий, третьи — запускаются с помощью реестра, но задача только кажется сложной, ведь с помощью определённых инструментов, встроенных в OS, мы сможем очень просто исключить все нежелательные программы из автозагрузки, а необходимый софт — добавить в неё.

Друзья, вообще в этой теме существует очень много нюансов и в сегодняшней статье я попытался написать самое основное. Если у вас возникнут вопросы, то я с радостью отвечу на них в комментариях. Вы можете спросить меня о любом элементе вашей автозагрузки и я вам скажу, нужно его отключать или нет.

Как уже было замечено, автоматический запуск большого количества программ увеличивает время загрузки операционной системы на минуты, но если антивирус должен запускаться вместе с OS, то многим приложениям в этом особой нужды нет. Давайте начнём разбираться с конкретных жизненных примеров.

Нам в сервисный центр принесли на диагностику ноутбук с установленной Windows 10, который очень долго загружается. В первую очередь просмотрим автозагрузку системы. Запускаем Диспетчер задач и идём на вкладку «Автозагрузка», изучаем её опытным взглядом и делаем вывод, что пользователю из 15-ти программ, нужна в автозапуске только одна — Диспетчер Realtek. Доказываю почему, а затем покажу как это всё можно отключить.

Примечание: Обратите внимание на колонку «Влияние на запуск», именно она даёт возможность оценить, насколько программа влияет на скорость загрузки OS. Если влияние приложения на запуск «Высокое», то значит программа может тормозить загрузку системы.

1. AbDocsDllLoader.exe — процесс принадлежит программному обеспечению разработчика Acer и не является необходимым. Что он делает — позволяет пользователям синхронизировать текстовые документы на всех своих устройствах, но как это точно происходит мне в своё время не смогли объяснить даже в поддержке Acer и шёпотом посоветовали не обращать на него внимания.

2. Acronis TIB Monitor — принадлежит программе Acronis True Image, которая может создавать резервные копии операционной системы и в дальнейшем при необходимости восстанавливаться с помощью них. Но что интересно, программа Acronis на данный момент не установлена на этом ноутбуке, хозяин последний раз пользовался ей год назад, а затем удалил, но часть файлов осталась и запускается вместе с OS.

3. Adobe Updater Startup Utility — этот процесс следит за выходящими обновлениями приложений Adobe (‎Photoshop, ‎Adobe Reader, ‎Adobe Acrobat и др.). Перечисленные программы обновляются раз в год, поэтому нет никакой необходимости каждый день тратить время на запуск этого процесса.

4. Вредоносный браузер Амиго! Если вас замучила реклама в браузерах, то это именно из-за него, отключаем из автозагрузки и удаляем в первую очередь.

5. CHP (Create Hidden Process) — принадлежит программе настройки подключения к Интернету от провайдера Билайн, но пользуется хозяин ноутбука интернетом от «Ростелеком».

6. Download Master — известный загрузчик файлов, но хозяин ноутбука никогда им не пользовался и даже не знает о его существовании. Видимо загрузчик установился в виде пакетной установки с каким-либо другим софтом.

7. Epson Status Monitor — рабочая программа принтера Epson. Год назад к ноутбуку подключали принтер этого производителя и больше подключать не будут.

8. games — находящийся в автозагрузке ярлык, запускающий вместе с системой вредоносный браузер Амиго с жуткой рекламой казино «Вулкан».

9. Microsoft OneDrive — облачный сервис от Майкософт. Хозяин ноутбука пользуется Яндекс Диском и OneDrive ему не нужен.

10. Notifier — утилита от Билайна, но так как на ноутбуке сейчас интернет от другого провайдера, то нам она не нужна.

11. NVIDIA Backend — программа, подбирающая из своей базы оптимальные настройки для ваших игр. Хочу сказать, что даже геймеры ей не пользуются и отключают.

12. NVIDIA Capture Server Proxy — процесс, относящийся к GeForce Experience — обеспечивает автоматическое обновление драйверов вашей видеокарты. На этом ноутбуке она сработала некорректно и пришлось в безопасном режиме откатываться к старому драйверу.

13. Skype — всем известная программа для общения, но хозяин ноутбука пользуется ей раз в месяц и способен запустить её вручную.

14. www.rvulkan — находящийся в автозагрузке ярлык, запускающий вместе с системой браузер Амиго с сайтом казино «Вулкан».

15. Диспетчер Realtek — программа для настройки звуковой карты вашего ноутбука.

Чтобы добавить программу в автозагрузку, вы можете просто поместить ярлык этой программы в папку автозапуска. Если не знаете как создать ярлык, то читайте нашу подробную статью.

Друзья, к сожалению автозапуск многих программ (в том числе и вирусов) не может быть отображён в диспетчере устройств на вкладке «Автозагрузка», в этом случае воспользуемся реестром и планировщиком заданий, а также службами.

Диспетчер устройств далеко не во всех случаях покажет вам загружаемые вместе с операционной системой программы, в этом случае нужно попробовать отключить автозапуск приложений с помощью реестра.

Запустите редактор реестра. 

Пуск—>Выполнить, вводим в поле ввода команду: regedit

Статьи по этой теме:

2. Как в Диспетчере задач отобразить путь к файлу или вредоносной программе, находящейся в автозагрузке Windows 10