Mediatek usb vcom drivers windows 10

MediaTek USB VCOM Driver is used to connect MediaTek Smartphones with Windows PC. The Driver is needed for many tasks like installing the firmware on a bricked device and more. If you are looking forward to executing such tasks you can use VCOM Drivers. Here you can Download MediaTek USB VCOM Drivers for Windows with an installation guide.

What are VCOM Drivers?

VCOM Drivers are specific USB Drivers to detect MediaTek phones on Windows-based computers. The driver allows users to flash Firmware on bricked phones and also allows modifications of MediaTek phones. It helps Windows PC to detect MediaTek phones even without a battery.

So, if you have a phone with a MediaTek chipset, you should use MTK VCOM Driver on your PC for any modification by different tools.

Supported Platforms:

• Windows 7 (32/64 bit)
• Windows 8 (32/64 bit)
• Windows 8.1 (32/64 bit)
• Windows 10 (32/64 bit)
• Windows 11

Download VCOM Driver

The VCOM driver is a small utility driver (in kb’s) yet very useful. And if you want to flash firmware or any other functions on MediaTek based phones, use the below link to download MTK VCOM USB Driver on Windows PC.

The VCOM Driver is for Windows 10 32 bit and Windows 10 64 bit operating systems along with other Windows versions. After downloading the driver, follow the given guide to install VCOM Driver on your PC. The installation process is different than common executable files. So, it is recommended to follow the guide.

How to Install MediaTek VCOM Drivers on Windows PC

Check out the Windows version (32 bit or 64 bit) in the system properties. And if you have Windows 10 64 bit, then you have first to disable driver signature enforcement. No need to disable driver signature enforcement on Windows 10 32 bit.

Disable Driver Signature Enforcement Window 64 bit

1. Click on Start and go to Settings > Update & Security.
   
2. In left pane select Recovery.
3. Under Advanced Startup, click on Restart Now.
   
4. Click on Troubleshoot and select Advance options.
5. Click on Startup settings > Restart.
6. It will restart to Startup Settings with various options.
7. Press F7 or 7 to disable driver signature enforcement.
8. Now you can install the driver.
9. Repeat this procedure after installing MTK VCOM USB Driver on your computer.

Step to Install MTK VCOM Driver on Windows PC

1. Extract the downloaded zip file using Winrar or Winzip.
2. Right click on the start icon and open Device Manager.
   
3. In Device Manager click on the first item.
4. Click on Action > Add legacy hardware.
   
5. On the Add Hardware Wizard window click on Next.
6. Select “Install the hardware that I manually select from a list (Advanced)” and click Next.
7. Select Show All Devices and click Next.
   
8. Now click on Have Disk and locate to the extracted folder.
9. Select Windows 10 x64 MTK USB Drivers.inf for 64-bit Windows or select Windows 10 x86 MTK USB Drivers.inf for 32-bit Windows.
   
10. After selecting click on OK. From the Model list select MTK USB Port and click Next.
    
11. If a warning window pops up, click on Install the driver software anyway.
12. This will install MediaTek Preloader USB VCOM Port, MTK DA USB VCOM Port, MTK USB Debug Port, MTK USB Modem Port, and MTK USB Port.
13. Open Device Manager again and expand Ports (COM & LTP).
14. Right click on MTK USB Port (COM3) and click Uninstall.
15. In the Confirm Device Uninstall window uncheck “Delete the driver software for this device” and click OK.

That’s it, you have now installed MTK VCOM USB Drivers on your Windows PC. Now you can connect your MediaTek phone with your PC to transfer files, flash firmware, install recovery, and other modifications. Tools like SP flash tool can easily detect MediaTek smartphones if the VCOM USB Driver is installed.

---

Still any questions in mind? Let’s take a dig at the FAQ!

What is a VCOM Driver?

VCOM USB Drivers detect your MediaTek smartphone on Windows. The Driver allows users to flash Firmware on bricked phones and also allows modifications of MediaTek phones.

How to Install MTK VCOM Drivers on Windows 10?

First, download the appropriate driver from the given link. Transfer the downloaded Driver to your Windows PC and then Install it on your system. You can follow the step-by-step mentioned in the guide.

Is VCOM Driver available for Windows 11?

Yes, you can download & Install the MediaTek USB VCOM drivers on Windows 10 and Windows 11 (on both 32-bit & 64-bit).

What is the use of MTK VCOM USB Driver?

The MediaTek VCOM driver lets you transfer the files between phone and computer. You can easily share the media files with the help of MTK drivers.

Related to Drivers

• Download All MTK USB Drivers for Windows 32 & 64 bit
• Download MTK FRP Tool to Bypass/Unlock/Remove FRP
• MT65xx Preloader Drivers Download for Windows 7/8/10

By Ashutosh singh

Computer Science graduate and tech enthusiast. Love testing new tech gadgets ever since my first windows phone from Samsung. Working as a technical writer for more than five years, and I believe I have also developed good SEO skills. In my spare time, I like watching movies, and playing games.

MediaTek USB VCOM Drivers Windows 10 free download now. MediaTek drivers are most critical free programming to interface your MediaTek Android gadgets with a PC Windows frameworks. The post is composed of the MediaTek USB VCOM Drivers and is being given at the base of this article to download for nothing. 

You are going to download the refreshed MediaTek USB VCOM Drivers and are given at underneath to free. By introducing this driver, you will have the capacity to associate your MediaTek VCOM gadgets by means of a perfect USB information link. Presently times there is critical to associate your Android cell phones to the PC through utilizing a USB link availability however one all the more thing is a pressing need to finish this procedure. 

Exchange your records, pictures, tunes, music to your PC framework by the only establishment of this driver on your Windows 7. Before the download, read the establishment guides and the directions to introduce the driver on your framework Windows 7 32-bit or 64-bit. 

• 
  Above all else, download the refreshed MediaTek USB VCOM Drivers from the given downloading join area URL underneath. 

• 
  At that point introduce it on your Windows 7 by utilizing the downloaded .exe record. 

• 
  After fulfillment of the procedure of establishment, restart your framework Windows. 

• 
  Your everything the availability settings will oversee after a solitary reboot. 

• 
  Presently, you can associate your gadget with the PC Windows 7 through a good USB information link. Note: must utilize an authority USB information link. 

• 
  You are finished. 

Much obliged for picking our webpage to download the MediaTek USB VCOM Driver for your Windows 10 32-bit or 64-bit. Continue going by and download more required drivers for nothing.

MediaTek USB VCOM Drivers Windows 10

Through this page, you can download the latest version of the MediaTek USB VCOM drivers for Android devices with the MT65xx, MT67xx, and MT68xx chipsets. Further, we will also guide you on how to install the MediaTek USB VCOM drivers on any Windows 11-to-XP PC using two different methods.

Table of Contents

• What are MediaTek USB VCOM Drivers?
• Download MediaTek USB VCOM Drivers
• How to Install MediaTek USB VCOM Drivers
  • Method 1: Automatic & Direct Installation
  • Method 2: Manual Installation
• FAQs: Frequently Asked Questions

What are MediaTek USB VCOM Drivers?

MediaTek USB VCOM Drivers allow your computer to connect and communicate with a MediaTek-powered Android device over a USB connection.

So, why and when would you need to install MediaTek USB drivers on your PC? The primary purpose of these drivers is to help your Windows PC recognize the device’s Preloader for flashing firmware using the SP Flash Tool. To further understand this, let us first take a look at what the “preloader” is.

All Android devices come with a bootloader that executes the kernel and defines how the Android system is booted (known as the “Boot Process”). When it comes down to MTK Android devices, this is called the “Preloader”, a proprietary loader developed by MediaTek. Apart from being responsible for the boot process, the Preloader on MediaTek devices can also act as an interface to download/flash firmware files to the NAND memory of the device, which is where the Android OS resides. Something very identical to the EDL mode on Qualcomm Android devices.

The figure below explains how the Preloader on MediaTek-powered Android devices can communicate with the SP flash tool over USB (Courtesy of mcgrady_tracy at CSDN).

So, you would need to install the MediaTek USB VCOM drivers (or MediaTek Preloader Drivers) on your PC to be able to flash firmware files on any MTK Android device using the SP Flash Tool. This can allow you to flash the stock ROM for unbricking the device or upgrading the software on it. It can even help you install custom binaries like TWRP recovery, Magisk Root, and more.

Further, they also hold an important role when and if you need to transfer files to/from your Android device over MTP protocol, and also when operating with Android tools like ADB and Fastboot.

Download MediaTek USB VCOM Drivers

Below, you will find the links to download the latest MediaTek USB VCOM drivers for devices with MT65xx, MT67xx, and MT68xx chipsets. Choose the driver package according to the installation method you prefer to use.

Name:	MediaTek USB VCOM Drivers
File size:	8.85 MB
Supported OS:	Microsoft Windows 11, Windows 10, Windows 8.1/8, and Windows 7
Developer:	MediaTek Inc.
Download link:	For automatic/direction installation: Click here to download For manual installation: Click here to download

How to Install MediaTek USB VCOM Drivers

The provided MediaTek USB drivers could be installed on any Windows 11, Windows 10, Windows 8.1/8, Windows 7, Windows Vista, and Windows XP PC using two different methods.

The first method follows an automatic and direct approach and lets you install the said drivers by simply using the setup wizard. This is the easiest and recommended way to install MediaTek USB VCOM drivers on your PC.

However, if you find that the automatic installation method doesn’t work and your particular MTK Android device is still not detected by the computer, then you can follow the second method that takes the manual approach for the installation.

Method 1: Automatic & Direct Installation

1. Download the ZIP package of the MediaTek Preloader USB VCOM drivers to your Windows PC.
2. Go to the directory where the file was downloaded and extract its contents using an archive utility like 7-Zip.
3. Now double-click on the “MediaTek_Preloader_USB_VCOM_Drivers.exe” executable file.
4. If you’re operating on a PC with Windows 10 or Windows 8, you’d be prompted to allow “User Account Control“. Click on “Yes“.
5. The InstallShield Wizard will prompt you to select the destination folder where the USB drivers should be installed. By default, these are installed to “C:\Program Files\MediaTek\SP Driver“. If you wish to change the folder, you can do so by clicking on “Browse“.
   
6. Click on “Next” once you have finalized the destination folder.
7. Now, click on the “Install” button to begin installing the MediaTek Preloader USB VCOM drivers on your Windows PC.
   
8. If the setup prompts you to remove USB devices first, then make sure that you have disconnected your MTK Android device from the PC and click “Yes“.
9. Once the installation finishes, click “Ok” and then on “Finish” to close the setup wizard.
   
10. Finally, restart your PC.

That’s it! The MediaTek USB VCOM drivers are now successfully installed on your Windows PC.

Method 2: Manual Installation

If the automatic method does not work and your PC still doesn’t recognize your MTK Android device, then you can follow the steps below to manually install MediaTek USB VCOM drivers on Windows.

Step 1: Download the “MediaTek_Preloader_USB_VCOM_Drivers.zip” package on your PC. Then extract the contents of the downloaded file to a suitable location. The extracted folder should contain the Windows driver information files.

Step 2: Go to “Control Panel” > “Device Manager” on your Windows PC. Click on your PC’s name at the very top of the Device Manager’s list, then click “Action” and select “Add legacy hardware”.

Step 3: The Add Hardware Wizard should now be launched on your PC, click on “Next”.

Step 4: Then choose “Install the hardware that I manually select from a list” from the menu and hit “Next”.

Step 5: Select “Show All Devices” from the top of the shown list and click “Next”.

Step 6: The hardware wizard will now prompt you to select the device driver that you want to install. To do this, click “Have Disk”.

Step 5: Now click on “Browse” and navigate to the location where the USB driver package was extracted. Open the “Android” folder, select the “android_winusb.inf” file and click “Open”.

Step 6: You should now see a list of device drivers available for installation. Depending on what your use-case is, select the driver and click on “Next”.

For example, if you’re working with ADB and need the ADB drivers, select “Android ADB Interface”. On the other hand, if you want to flash a firmware file on your device using the SP Flash Tool, then choose “Android Bootloader Interface”.

Step 7: The hardware wizard should now be ready to install the driver. Finally, click “Next” to begin installing the MediaTek USB VCOM drivers.

That’s it! Once the driver installation is complete, click “Finish” and restart your PC.

FAQs: Frequently Asked Questions

Now before you leave, we have tried to answer some of the most frequently asked questions regarding the MediaTek USB VCOM drivers.

Question 1: I have encountered the “Code 10” error message towards the end of the installation process, what should I do?

• Answer: If you see the “Code 10” error message stating “The software for this device is now installed, but may not work correctly”, then you can safely ignore it. Make sure that you reboot your PC after the USB drivers have been installed.

Question 2: I have installed the USB drivers and my MediaTek Android device is still not recognized by the computer, what should I do?

• Answer: In rare cases, the drivers may not work because they detect a previous installation of another set of drivers. That means you have several MediaTek USB drivers installed on your machine.
  In such a case, you will need to uninstall all MediaTek USB drivers from your PC (we suggest using USB Deview for this purpose). Once done, you can re-install the USB drivers from above.

Question 3: I am operating with the Android ADB command-line tool, where can I download the MediaTek ADB drivers?

• Answer: The MediaTek ADB drivers are already included in the USB drivers package provided on this page, so you wouldn’t need to install them separately. If you opted for the manual installation, make sure to choose “Android ADB Interface” to install the ADB drivers.

Question 4: The driver installation fails and shows that “The third-party INF does not contain digital signature information, what should I do?

• Answer: The USB drivers provided here are all digitally signed. Though you might not encounter this error, if you do, then you’d need to disable driver signature enforcement on your Windows 8 or 10 PC. We’d suggest following this guide to do this.

So there you go! You have just been able to download MediaTek USB VCOM drivers and learned how to install them using two different methods. You can now go ahead, transfer files, work with ADB, or flash stock ROM using the SP Flash Tool for unbricking or upgrading your phone.

If you have any questions regarding the drivers or the installation steps shared on this page, please feel free to let us know via the comments section below.

Also download OEM-specific USB drivers for:

• Samsung
• Xiaomi
• LG
• OnePlus
• Realme

MTK Preloader VCOM USB Driver is a small Windows program that helps users to detect any MediaTek-powered Android phones to the computer. The driver is required for performing many tasks, such as installing the firmware on a bricked device, upgrading, Updating, or flashing the phone for free. If you want to execute such tasks then follow these simple installation guides and download MTK VCOM Preloader Driver to your PC for free.

MediaTek VCOM driver allows to unlock Pattern, Password, FRP lock, upgrade, update, and repair IMEI from all MTK powered devices. In case, if you facing any soft bricking issue then follow the full guide from here. Here, you get the link to download MTK VCOM Driver for your windows PC.

You wouldn’t be able to use any MTK Flash or other Unlock tool without installing a proper USB Driver on your Win 10, Win 11 computer. Here I provide you with the all the installation processes Direct & Manual. So, follow the full article carefully.

The Preloader program is known as the proprietary loader developed by MediaTek for Android devices. The Preloader is mainly used on MediaTek devices to initiate the boot process. Apart from that, It is also used as an interface for flashing the firmware files to the NAND (Android OS Stored) memory of the device.

Note: These drivers are compatible with all versions of Microsoft Windows 7, Windows 8, Windows 10, & Windows 11 version (32 & 64bit).

Download MTK Preloader VCOM USB Driver latest version supports up to Win 10, Win 11 (x32 & x64 bit). The drivers work both on Installer & manual method and it is 100% working and fully verified no need to worry about viruses or malware.

File Name: (Auto Installation) MediaTek_Preloader_USB_VCOM_Drivers_Setup_Signed.zip
Size: 10 MB
Supported Chipsets: MTK (MediaTek)
Download Latest: Click Here
Password: BYPASSFRPFILES.COM
Other: MTK USB Driver

File Name: (Manual Installation) MediaTek_Preloader_USB_VCOM_Drivers.zip
Size: 10 MB
Supported Chipsets: MTK (MediaTek)
Download Latest: Click Here
Password: BYPASSFRPFILES.COM

More: Download Libusb Win32 Driver Latest Version 2022 | New Update

Here we share with you three different methods to install MTK Android Drivers on any Windows 32 and 64bit PC. The first method we share here is an automatic method by simply using the setup wizard.

Method 1 : Automatic Installation

• Download the USB drivers according to your PC’s OS architecture (32-bit or 64-bit).

• Then Open the folder, and double click to run the setup.exe.

• Then click on the Next => Next => Install.
• The installation wizard will open
• Select Install this driver software anyway
• Do it for several times

• Wait for a few seconds to complete the Installation.
• It will ask you to restart the Ccomputer
• Tap Ok
• That’s it.

If somehow you have failed to installed the MTK VCOM Preloader Auto installation file then you can follow our below manually installation guide to install it on your pc successfully.

Manually Installation on Windows

• Open the Control Panel > Device Manager on your Windows PC.

• Now click on the Action =>> Add legacy hardware.

• After that, a new popup will be opened, click on the “Next” button from there.

• Then select on the “Install the hardware that I have manually select from a list (Advanced)” and click on Next.
• Now select “Show All Devices” and then click on Next.

• After that, Another popup will be opened, click on Browse.
• Now select the downloaded driver files there.
• Once selected then click on the “OK” button.
• Then you will be going back to the Add Hardware popup, and click on the Next button from there.
• Again click on the Next button and wait for a few seconds.
• That’s it.

Disable Driver Signature Windows

• Open Start menu =>
• Select Power Options

• Press & Hold Shift Button and Press Restart
• Your PC will be restarted and Boots with the Safe mode menu

• Click on Troubleshoot =>>> Advance Options

• Then Click on Startup Settings =>> Restart
• The Startup Settings will appears

• Press 7 to select Disable Driver Signature enforcement
• Your Computer will be rebooted
• Now re-extract the USB Driver Setup file
• Install the driver by following the above listed process
• That’s it.

How to Update MTK VCOM Driver

• Open the Control Panel > Device Manager on your Windows PC.

• If there you will see “MTKPreloader” under the device manager.

• Then right-click on the “MediaTek Com“, then select the “Search Automatically Updated Driver Software“.
• Then the windows will automatically find the right USB driver for your device.
• Wait for the finish.
• That’s it.

Read More: Oppo Preloader Driver For All Oppo MTK Devices

I write about Android FRP Solutions, Android problems, GSM tutorials. If your device stuck at the Google Account Verification screen then here you can find all the possible ways to Bypass it. In my free time, I love to play games: