Как зайти в роутер проксима

Proxim Router Login: To setup & configure the Proxim router, it is very important to access the Proxim router default login page. Kindly check the router bottom area to find the Proxim Router IP Address & Proxim default password or refer to the below table.

Proxim Router Default Login is required to set, enable/disable, change necessary router settings such as., change the username/password, enable/disable network connectivity, upgrade firmware software, reset the router to factory setting, and more. There are several models in Proxim for consumers. But the login procedure remains the same throughout any Proxim model.

Proxim Router Login Instruction Guide

Got a new router? The very first thing required to do is, setting up the router. To do that, log in to the Proxim router is required. We want to help the user with a detailed guide.

The below instructions will help the user on how to login to my Proxim router:

1. The first step is to connect the router with the computer PC /laptop using the LAN cable or use Proxim wifi and connect to the router through the wireless network.
2. After connecting, use the preferred browser (Google Chrome, Mozilla Firefox, Opera, Safari, or Internet explorer of user choice and type the Proxim router address in the browser address bar. Can’t find it? Kindly check the back-side of the router.
3. After accessing the router admin panel, fill the username and password from the above table. Users can find in the default username and password for Proxim on the back-side of the router.

NOTE: The best way to connect with the router is through a wired connection using a LAN Cable which avoids uninterrupted connection whenever any settings are saved.

The above instructions are very simple and easy to follow. We hope this tutorial was really helpful with Proxim login. After getting access to router admin, the user can do any of the above options:

• Setting up the Router
• Router Configuration
• Change Proxim password
• Reset to Factory settings
• Upgrade Firmware

Proxim Router Setup:

We will show users how exactly they can setup Proxim for internet connection.

Follow the steps given below to setup Proxim:

1. Connect to the router and access the router admin interface.
2. Enter the default open source credentials in the field given and log into the router.
3. Click on the Quick Setup option and choose the necessary settings to configure the network connection.
4. Complete the setup and save the necessary option.
5. Click on Save to complete the setup.

Proxim Router Configuration:

The procedure is relatively simple, like the instructions that have already been provided.

Follow the steps given below to configure Proxim settings:

1. Connect to the router and access the router admin page.
2. Log in to the router by filling in the login details in the given field.
3. Now, the user will be able to access several router settings.
4. Enable DNS setting, configure tri-band settings,
5. Click on the required section, and enable or change the settings as per user convenience and requirement.

Change the Proxim Router Password:

After validating the Proxim admin interface with the default password and login, follow the below steps to change the Proxim password.

To change the router default password:

1. Navigate to System Tools/Settings.
2. Select the Password option from the sub-menu.
3. Verify old username & password.
4. Enter the new username and password.
5. Save the settings & restart the router.

To change the Wireless security password:

1. Click on the Wireless tab and then click on the Wireless Security sub-menu.
2. Several security options are available to pick from. Select the WPA/WPA2 – Personal option.
3. Now type the wireless password in the respective field box. This will be the user’s wi-fi password.
4. Click on Save to save the new wifi password.

Reset Proxim to Factory Settings:

Follow the steps given below to factory reset your Proxim:

1. Locate the Reset button present on the router. It is usually present at the back of the router. Use a pen or a paper clip to press and hold it for about 30 seconds.
2. Observe the LED light on the router. If it blinks or flashes, that means your router is resetting.
3. Unplug the router from the power supply for 30 seconds and plug it back in to complete the reset network process.

Update Proxim Router Firmware Software:

Firmware upgrades are basically for bug fixes and general improvements.

Here the steps are given below to perform a firmware upgrade for Proxim:

1. Check the model number and version of Proxim so that the user can download the right firmware.
2. Go to the Proxim Support Site, accept the license agreement, and download the firmware file.
3. Connect the router to the PC computer.
   It is recommended to upgrade firmware through wired connections only.
4. Access the routers web-based setup page from any web browser.
5. Enter the login credentials in the space provided.
6. Click on Administration Tab and then click on Firmware Upgrade.
7. Click the browse button present there.
8. Locate the file that the user downloaded from the support site and then click Open.
9. Click the Start Upgrade option and Continue when it prompts that the Upgrade has been successful.
10. Now TURN OFF and then TURN ON the router to complete the upgrade.

Proxim Router Support:

If the user can’t log in to the Proxim router or any problem while connecting the router, we would recommend checking the below solution for any common router problems.

Here are some of the common problems users might experience while setting up Proxim.

• IP Address issue: Check the Proxim IP address carefully, whether you had entered it correctly. It should not contain any alphabet.
  Wanna help? Refer to our article on how to find default router login ip.

• Forgot Router password: The only way to restore the password is router reset or reset to factory settings. To do the hard resetting, find a small hole on the sides of the router. Using a blunt pin, press and hold on the hole. This process will reset the Proxim back to its factory settings.

• Router Admin not loading: This can be due to the connection problem. Check the cable or router wifi connection or wireless network, whether the router is connected to a laptop or computer, or PC. Try disconnecting the cable and restart the router and connect again.

Still if you experience any problem while connecting, we request you to contact the Proxim support team or customer care. They will be available 24/7 through live chat.

Do comment below, we will take a look and could solve it.

• Published by
• Published: August 22, 2022 Updated: March 24, 2023
• Views:

  869

If you want to log in to the router admin page, then you are in the right place. When you are logged into the router’s administrator settings panel, then you will be able to change the username/password of your WiFi network and other settings such as WAN Settings, SSID, LAN, create a guest network, set up a firewall, port forwarding, and various advance settings, etc.

How to login to Router?

First of all, make sure your router is connected either by an Ethernet cable or WiFi network to your computer, then follow the steps below:

1. Open your web browser and type the IP address of the router into the URL bar and hit the Enter key. The default IP is or

   Tips: If these IP not working, then you can check out common default IP address of router.
2. Then, you will be taken to the router login page, where you will get a username and password field.

   

3. Now, enter the username and password of your router and press the Login button. (List of default router username and password)
4. You will now be logged in to the router’s Admin Control Panel. Now, you will be able to change the settings of the router from here.

Forgot IP Address Username and Password?

Check Manually

If you forgot your router’s login Username and Password for the , then you can check the Router’s Manual/Box or the back of the router.

Resetting the Router

If you can’t get access the router cause you have forgotten router’s username and password, or there are several reasons you need to do reset the router to factory settings. Now, you want to start over with default settings.

Note: After reset the router, your all customized settings will wipe out.

How to reset your router to restore factory default settings?

To reset the router:

1. Find the router’s Reset button on the back or the bottom.
2. Use a paperclip or needle to press and hold the reset button for about 15-30 seconds.
3. Then, release the button.
4. Now, wait the router will automatically reboot, and the router power back on.

Troubleshooting

If you cannot get access the router login page, it may be due to:

• A hardware configuration connectivity issue (such as a bad Ethernet cable)
• The router’s IP address entering incorrectly.
• Using Incorrect username or password.
• An IP address issue on the computer.
• The wireless router an issue with itself.

How to get your router IP address?

Are you trying with this IP to login to your router’s admin page? It doesn’t work?

Now, here we will discuss with you some of the methods to find your router/modem IP address on your device such as Windows, Android Phone, iOS, etc.

For Windows:

1. Go to the Windows search box at the bottom left corner of your screen.
2. Now, type cmd then open Command Prompt app when it shows up.
3. Now, enter the command ipconfig at the prompt. Then press Enter key.
4. Finally, you will get your Default Gateway IP address.

   

• If you are a macOS device user, then follow the above method in your terminal app with the command ipconfig.

For Android Phone:

Go to your phone Settings, search About phone or scroll down to select About phone, or System >> About phone, then find the IP address.

For iPhone/iPad

If you are an iOS device user, then follow those steps:

• Navigate to Settings >> Wi-Fi.
• Then, click on the ‘i’ button which Wi-Fi you are connected to go to the network option.
• Now, the IP address will be displayed.