Как включить vga режим на windows 10

For a Microsoft Windows 2000 version of this article, see
268852.

IN THIS TASK

• SUMMARY

• • Force Windows to Use the Standard VGA Mode Drivers Without Having to Use Safe Mode

• REFERENCES

Summary

This step-by-step article describes how to force Windows to use a standard VGA mode driver that is included with Windows. This procedure is useful in the following scenario.

If you install Windows on a computer that is using an unsupported video adapter, Windows Setup installs a standard VGA mode driver. However, after you install Windows, you obtain and install a Windows-compatible driver for your video adapter from an original equipment manufacturer (OEM).

In this scenario, the computer may have problems shutting down, or the computer may stop responding (hang). To troubleshoot this problem, you may want remove the new OEM drivers and revert to the standard VGA drivers to determine whether the OEM drivers cause the problem.

This article describes how to remove OEM video drivers and force Windows to use the standard VGA drivers that are included with Windows.

Force Windows to Use the Standard VGA Mode Drivers Without Having to Use Safe Mode

When you install an OEM driver, the Windows installer program copies the OEM installation file (Oemsetup.inf) to the %Systemroot%\Inf folder. Setup then renames the Oemsetup.inf file to Oemn.inf, where n is an incremental number for each OEM driver that is installed.

To identify the OEM video-specific Oemn.inf file, you can open each Oemn.inf file in Microsoft Notepad, and then compare it with the original Oemsetup.inf file. After you find a match, move that specific Oemn.inf and Oemn.pnf files to a different location, or rename the files with a different file name extension.

1. After you locate the matching .inf files, move the Oemn.inf and Oemn.pnf to a different folder.

2. In Device Manager, right-click your video adapter, and then click Uninstall to remove the video adapter.

3. Restart your computer.

   After you log on, you receive a message stating that new hardware has been found and that it is a VGA compatible video controller. The Found New Hardware Wizard starts.

4. Click Next.

5. Click Search for suitable driver, and then click Next.

6. Click to clear all of the search option check boxes, and then click Next.

7. Click Disable the device, and then click Finish.

After you finish steps 1 through 7, Windows uses the Vga.sys generic video driver. This is the same VGA driver that Windows uses in Safe mode.

If the computer becomes stable or shuts down in a typical manner while you are using the standard VGA driver, you may have to contact the OEM driver vendor to report the problems that you have when you use the OEM driver. You may also have to obtain and install a newer driver (if one is available) that resolves these problems.

To restore the OEM drivers, follow these steps:

1. Move the Oemn.inf and Oemn.pnf files back to the %Systemroot%\Inf folder.

2. Use Device Manager to remove the VGA video adapter, and then restart the computer.

   Windows Plug and Play locates the OEM video adapter and reinstalls the OEM drivers automatically.

NOTE: If you press F8, and then click Enable VGA Mode on the Windows Startup menu, Windows starts with a screen area of 640 by 480 pixels with low 8-bit color and may use an OEM video driver, not the standard VGA driver.

Method 1: Booting to VGA Mode Using Windows Advanced Options Menu

1. During the rebooting process, repeatedly press the F8 key to enter Windows Advance Options Menu.
2. Use the up and down arrow keys to select Enable VGA Mode and then press the Enter key.

How do I get my computer to recognize my VGA monitor?

Here are some steps to take:

1. Turn off your computer and monitor. Unplug their power cables.
2. Wait a few minutes. Afterwards, reconnect the VGA cable to the computer and monitor. Plug the power cable back, too.
3. Turn on your computer and monitor and see if the VGA connection works just right.

How do I access VGA mode?

VGA Mode can be accessed by pressing the F8 key shortly after the initial POST screen is displayed on computer start up. If entered properly, a screen similar to the example above appears.

Why is VGA not working?

A missing or outdated graphics card driver can cause the VGA no signal issue, so you should keep your graphics card driver up to date. If you can’t update your graphics card driver with the problematic VGA connection, you should another type of connection, such as HDMI.

How do I enable the VGA port on my motherboard?

Step 1: Hold or tap the ‘Delete’ key immediately after powering on the system to enter the bios. Step 2: Use the arrow keys to choose ‘Advanced’ menu > System Agent (SA) Configuration\Graphics Configuration > iGPU Multi-Monitor setting > Enable as below. Press the ‘F10’ key to save and exit.

How do I activate my monitor?

Select Start > Settings > System > Display. Your PC should automatically detect your monitors and show your desktop. If you don’t see the monitors, select Detect.

How do I find my VGA monitor on Windows 10?

To detect a second monitor manually on Windows 10, use these steps:

1. Open Settings.
2. Click on System.
3. Click on Display.
4. Under the “Multiple displays” section, click the Detect button to connect to the external monitor.

How do I get Windows 10 to recognize my monitor?

Method 1 – Manually detect Monitor settings

1. Click on the Start button to open the Settings window.
2. Under the System menu and in the Display tab, find and press the Detect button under the heading Multiple Displays. Windows 10 should automatically detect and other monitor or display on your device.

Why is my monitor saying no signal?

A faulty, loose, or wrongly-placed cable is one of the most common reasons for a monitor saying no signal. Here’s how to properly check your DVI, HDMI or DisplayPort cables: Unplug each cable and then replug them. Ensure each one is properly connected (fully pushed in).

How do I change my VGA mode resolution?

In the left pane, click on Display. In the right pane, scroll down and click Advanced display settings. If you have more than one monitor connected to your computer, then select the monitor on which you want to change the screen resolution. Click the Resolution drop-down menu, and then select a screen resolution.

What is VGA mode on Windows XP?

If you are running Windows 2000 or Windows XP, there is another mode known as “VGA mode” which allows Windows to be fully functional except it uses a plain old VGA (circa 1987) video mode. You get into VGA mode the same way as safe mode except you select “Enable VGA Mode” rather than “Safe Mode” on the startup menu.

What is full form of VGA?

External Websites. By The Editors of Encyclopaedia Britannica • Edit History. VGA, in full Video Graphics Array, computer chipset standard for displaying colour graphics. With the widespread availability of high-definition monitors, VGA was supplanted by HDMI (High-Definition Multimedia Interface).

How do I plug in VGA?

How To: Connect a VGA Device

Can a VGA port be disabled?

Right click anywhere on the desktop, select graphics options, –> Output to –> Intel Dual Display clone –> Notebook+Monitor –> turn off the external display prior to disconnecting cable –> Select Graphic options, Output to, Notebook. Start >> Control Panel; then look for Graphics Properties.

How do I fix the white VGA on my motherboard?

How To Fix VGA Lights on Motherboard

1. Check Your Power Supply.
2. Remove all Hardware.
3. Reseat the Graphics Card. Removing the Graphics Card. Reinserting the Graphics Card.
4. Boot Without Graphics Card.
5. Check for Any Damages/Stains in GPU or PCIe Slots.
6. Reset and Update BIOS. Reset BIOS. Replace CMOS. Update BIOS.

What is VGA support in BIOS?

Traditionally, a VGA card is initialized by software known as the VGA BIOS, which is considered an extension of system BIOS. It is loaded by the system BIOS from an expansion ROM located on the VGA card into a specific address in system memory.

How do I enable disabled Display?

Make sure the monitor is plugged in with the cable, turn it on, rigth click on your desktop, click screen resolution, if you only see [1] monitor click detect, after that you should see [1] and [2] click [2] and click under multiple displays: extend these displays.

How do I switch screens using Windows with the keyboard?

To switch between desktops:

1. Open the Task View pane and click on the desktop you would like to switch to.
2. You can also quickly switch between desktops with the keyboard shortcuts Windows key + Ctrl + Left Arrow and Windows key + Ctrl + Right Arrow.

How do I use an external monitor with Windows 10?

Windows 10

1. Right click on an empty area of the desktop.
2. Choose Display Settings.
3. Scroll Down to the Multiple displays area and select select Duplicate these displays or Extend these displays.

Why does HDMI work but not VGA?

HDMI cables apply some sort of post-processing to ensure the signal quality and clarity due to which the input lag occurs. HDMI ports and cables are more adaptable than the VGA ports. This means that if you have a VGA port and an HDMI cable you can connect it using an adaptor. However, the reverse will not work.

How do I reset my monitor?

How to reset the LCD monitor to the default settings.

1. On the front of the monitor, press the MENU button.
2. In the MENU window, press the UP ARROW or DOWN ARROW buttons to select the RESET icon.
3. Press the OK button.
4. In the RESET window, press the UP ARROW or DOWN ARROW buttons to select either OK or ALL RESET.

What are VGA settings?

VGA is a low resolution setting.

• Pixel Count in a VGA Picture. A VGA picture is 640 pixels wide and 480 pixels high, for a total of 307,200 pixels.
• When to Use the VGA Setting. The biggest advantage of the VGA setting is the small file size.
• When Not to Use VGA Setting.
• Other Image Resolution Considerations.

How do I change my VGA settings?

How to configure the monitor in VGA Mode.

1. Start the computer in VGA Mode.
2. Click the Start button and then click Control Panel.
3. In the Control Panel window, double-click the Appearance and Themes icon.
4. In the Appearance and Themes window, under pick a Control Panel icon, double-click the Display icon.

How do I force screen resolution on Windows 10?

Right-click on your desktop and select “Intel Graphics Settings”. For simple display settings, you can stay on the General Settings page and adjust the Resolution drop-down menu. If you need a custom setting, then select “Custom Displays”, you’ll be prompted with a warning about risk of overheating, etc.

What does Enable Boot Logging mean?

Enable Boot Logging.

Creates a file, ntbtlog. txt, that lists all the drivers that are installed during startup and that might be useful for advanced troubleshooting.

How do I start last known good configuration?

Boot to the Last Known-Good Configuration

1. Power on the system.
2. Press when the message For troubleshooting and advanced startup options for Windows, press F8 appears.
3. Choose Last Known-Good Configuration.

What is another name for the VGA cable?

Numerous types of Video Graphics Array cables are available in the market, be it the small or mini VGA port or the full size cables. Other names that are used to refer to such cables are the RGB connector, HD15, Mini 015, Mini D15, Mini sub D15, HDB-15, and DB15.

How do I connect my monitor to my PC?

How & Where to Connect Your Monitors

What connects to a VGA port?

A VGA connection sends analog video signals between compatible devices. You would usually use a VGA connector on your AV equipment to connect your PC or laptop to a projector or television.