Как установить poppler на windows

Chocolatey

Poppler is available as Chocolatey package:

choco install poppler

By default Poppler is installed in C:\ProgramData\chocolatey\lib\poppler and shims are automatically created for the following tools: pdfdetach, pdffonts, pdfimages, pdfinfo, pdfseparate, pdftocairo, pdftohtml, pdftoppm, pdftops, pdftotext, pdfunite.

To update Poppler, run:

cup poppler

Scoop

Install from the main bucket:

scoop install poppler

By default Poppler is installed in ~\scoop\apps\poppler and shims are automatically created for the following tools: pdfdetach, pdffonts, pdfimages, pdfinfo, pdfseparate, pdftocairo, pdftohtml, pdftoppm, pdftops, pdftotext, pdfunite.

To update Poppler, run:

scoop update poppler

TeX Live

As mentioned in another answer, MiKTeX currently ships with Poppler tools, and so does another LaTeX distribution, TeX Live.
From the guide:

Command-line tools.

A number of Windows ports of common Unix command-line programs are installed along with the usual TeX Live binaries. These include gzip, zip, unzip, and the utilities from the poppler suite (pdfinfo, pdffonts, …)

Poppler suite is located by default in C:\texlive\<year>\bin\win32 and, if you can compile your LaTeX documents, should work out of the box since this location is added to the PATH by the installer.

I just ran above cmd ‘pip install python-poppler’ on windows machine, tried using admin mode also but still unable to install it.. I have installed cmake using ‘pip install cmake’, installed wheel as well.. Below is the error —
ERROR: Command errored out with exit status 1:
command: ‘C:\Program Files\Python310\python.exe’ -u -c ‘import io, os, sys, setuptools, tokenize; sys.argv[0] = ‘»‘»‘C:\Users\User\AppData\Local\Temp\pip-install-ukoz8kqh\python-poppler_be5aae3fb1674a9d9639e78a0351048b\setup.py'»‘»‘; file='»‘»‘C:\Users\User\AppData\Local\Temp\pip-install-ukoz8kqh\python-poppler_be5aae3fb1674a9d9639e78a0351048b\setup.py'»‘»‘;f = getattr(tokenize, ‘»‘»‘open'»‘»‘, open)(file) if os.path.exists(file) else io.StringIO(‘»‘»‘from setuptools import setup; setup()'»‘»‘);code = f.read().replace(‘»‘»‘\r\n'»‘»‘, ‘»‘»‘\n'»‘»‘);f.close();exec(compile(code, file, ‘»‘»‘exec'»‘»‘))’ install —record ‘C:\Users\User\AppData\Local\Temp\pip-record-gnjhwuts\install-record.txt’ —single-version-externally-managed —compile —install-headers ‘C:\Program Files\Python310\Include\python-poppler’
cwd: C:\Users\User\AppData\Local\Temp\pip-install-ukoz8kqh\python-poppler_be5aae3fb1674a9d9639e78a0351048b
Complete output (74 lines):
running install
running build
running build_py
creating build
creating build\lib.win-amd64-3.10
creating build\lib.win-amd64-3.10\poppler
copying src\poppler\destination.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler\document.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler\embeddedfile.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler\font.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler\image.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler\page.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler\pagerenderer.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler\pagetransition.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler\rectangle.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler\toc.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler\utilities.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler_version.py -> build\lib.win-amd64-3.10\poppler
copying src\poppler_init_.py -> build\lib.win-amd64-3.10\poppler
creating build\lib.win-amd64-3.10\poppler\cpp
copying src\poppler\cpp_init_.py -> build\lib.win-amd64-3.10\poppler\cpp
running egg_info
writing src\python_poppler.egg-info\PKG-INFO
writing dependency_links to src\python_poppler.egg-info\dependency_links.txt
writing top-level names to src\python_poppler.egg-info\top_level.txt
reading manifest file ‘src\python_poppler.egg-info\SOURCES.txt’
reading manifest template ‘MANIFEST.in’
adding license file ‘LICENSE.txt’
writing manifest file ‘src\python_poppler.egg-info\SOURCES.txt’
running build_ext
Traceback (most recent call last):
File «C:\Users\User\AppData\Local\Temp\pip-install-ukoz8kqh\python-poppler_be5aae3fb1674a9d9639e78a0351048b\setup.py», line 24, in run
out = subprocess.check_output([«cmake», «—version»])
File «C:\Program Files\Python310\lib\subprocess.py», line 420, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File «C:\Program Files\Python310\lib\subprocess.py», line 501, in run
with Popen(*popenargs, **kwargs) as process:
File «C:\Program Files\Python310\lib\subprocess.py», line 966, in init
self._execute_child(args, executable, preexec_fn, close_fds,
File «C:\Program Files\Python310\lib\subprocess.py», line 1435, in _execute_child
hp, ht, pid, tid = _winapi.CreateProcess(executable, args,
FileNotFoundError: [WinError 2] The system cannot find the file specified

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "<string>", line 1, in <module>
  File "C:\Users\User\AppData\Local\Temp\pip-install-ukoz8kqh\python-poppler_be5aae3fb1674a9d9639e78a0351048b\setup.py", line 76, in <module>
    setup(
  File "C:\Program Files\Python310\lib\site-packages\setuptools\__init__.py", line 153, in setup
    return distutils.core.setup(**attrs)
  File "C:\Program Files\Python310\lib\distutils\core.py", line 148, in setup
    dist.run_commands()
  File "C:\Program Files\Python310\lib\distutils\dist.py", line 966, in run_commands
    self.run_command(cmd)
  File "C:\Program Files\Python310\lib\distutils\dist.py", line 985, in run_command
    cmd_obj.run()
  File "C:\Program Files\Python310\lib\site-packages\setuptools\command\install.py", line 61, in run
    return orig.install.run(self)
  File "C:\Program Files\Python310\lib\distutils\command\install.py", line 568, in run
    self.run_command('build')
  File "C:\Program Files\Python310\lib\distutils\cmd.py", line 313, in run_command
    self.distribution.run_command(command)
  File "C:\Program Files\Python310\lib\distutils\dist.py", line 985, in run_command
    cmd_obj.run()
  File "C:\Program Files\Python310\lib\distutils\command\build.py", line 135, in run
    self.run_command(cmd_name)
  File "C:\Program Files\Python310\lib\distutils\cmd.py", line 313, in run_command
    self.distribution.run_command(command)
  File "C:\Program Files\Python310\lib\distutils\dist.py", line 985, in run_command
    cmd_obj.run()
  File "C:\Users\User\AppData\Local\Temp\pip-install-ukoz8kqh\python-poppler_be5aae3fb1674a9d9639e78a0351048b\setup.py", line 26, in run
    raise RuntimeError(
RuntimeError: CMake must be installed to build the following extensions: poppler.cpp.modules
----------------------------------------

ERROR: Command errored out with exit status 1: ‘C:\Program Files\Python310\python.exe’ -u -c ‘import io, os, sys, setuptools, tokenize; sys.argv[0] = ‘»‘»‘C:\Users\User\AppData\Local\Temp\pip-install-ukoz8kqh\python-poppler_be5aae3fb1674a9d9639e78a0351048b\setup.py'»‘»‘; file='»‘»‘C:\Users\User\AppData\Local\Temp\pip-install-ukoz8kqh\python-poppler_be5aae3fb1674a9d9639e78a0351048b\setup.py'»‘»‘;f = getattr(tokenize, ‘»‘»‘open'»‘»‘, open)(file) if os.path.exists(file) else io.StringIO(‘»‘»‘from setuptools import setup; setup()'»‘»‘);code = f.read().replace(‘»‘»‘\r\n'»‘»‘, ‘»‘»‘\n'»‘»‘);f.close();exec(compile(code, file, ‘»‘»‘exec'»‘»‘))’ install —record ‘C:\Users\User\AppData\Local\Temp\pip-record-gnjhwuts\install-record.txt’ —single-version-externally-managed —compile —install-headers ‘C:\Program Files\Python310\Include\python-poppler’ Check the logs for full command output.

I’ve been trying to install Poppler using the pip command pip install python-poppler-qt4==0.18.1 but it shows a message like this

Downloading/unpacking python-poppler-qt4==0.18.1
Downloading python-poppler-qt4-0.18.1.tar.gz
  Running setup.py (path:C:\Users\BOOMER~1\AppData\Local\Temp\pip_build_Boomerang RMS\python-poppler-qt4\setup.py) egg_info for package python-poppler-qt4
    Traceback (most recent call last):
      File "<string>", line 17, in <module>
      File "C:\Users\BOOMER~1\AppData\Local\Temp\pip_build_Boomerang RMS\python-poppler-qt4\setup.py", line 42, in <module>
        import sipdistutils
    ImportError: No module named 'sipdistutils'
    Complete output from command python setup.py egg_info:
    Traceback (most recent call last):

  File "<string>", line 17, in <module>

  File "C:\Users\BOOMER~1\AppData\Local\Temp\pip_build_Boomerang RMS\python-poppler-qt4\setup.py", line 42, in <module>

    import sipdistutils

ImportError: No module named 'sipdistutils'

----------------------------------------
Cleaning up...
Command python setup.py egg_info failed with error code 1 in C:\Users\BOOMER~1\AppData\Local\Temp\pip_build_Boomerang RMS\python-poppler-qt4
Storing debug log for failure in C:\Users\Boomerang\pip\pip.log

How can I do this correctly?

It’s certainly possible to develop on a Windows machine, in fact, my first application was exclusively developed on the old Dell Precision I had at the time

There are three routes;

1. Install OSx86 (aka iATKOS / Kalyway) on a second partition/disk and dual boot.
2. Run Mac OS X Server under VMWare (Mac OS X 10.7 (Lion) onwards, read the update below).
3. Use Delphi XE4 and the macincloud service. This is a commercial toolset, but the component and lib support is growing.

The first route requires modifying (or using a pre-modified) image of Leopard that can be installed on a regular PC. This is not as hard as you would think, although your success/effort ratio will depend upon how closely the hardware in your PC matches that in Mac hardware — e.g. if you’re running a Core 2 Duo on an Intel Motherboard, with an NVidia graphics card you are laughing. If you’re running an AMD machine or something without SSE3 it gets a little more involved.

If you purchase (or already own) a version of Leopard then this is a gray area since the Leopard EULA states you may only run it on an «Apple Labeled» machine. As many point out if you stick an Apple sticker on your PC you’re probably covered.

The second option is more costly. The EULA for the workstation version of Leopard prevents it from being run under emulation and as a result, there’s no support in VMWare for this. Leopard server, however, CAN be run under emulation and can be used for desktop purposes. Leopard server and VMWare are expensive, however.

If you’re interested in option 1) I would suggest starting at Insanelymac and reading the OSx86 sections.

I do think you should consider whether the time you will invest is going to be worth the money you will save though. It was for me because I enjoy tinkering with this type of stuff and I started during the early iPhone betas, months before their App Store became available.

Alternatively, you could pick up a low-spec Mac Mini from eBay. You don’t need much horsepower to run the SDK and you can always sell it on later if you decide to stop development or buy a better Mac.

Update: You cannot create a Mac OS X Client virtual machine for OS X 10.6 and earlier. Apple does not allow these Client OSes to be virtualized. With Mac OS X 10.7 (Lion) onwards, Apple has changed its licensing agreement in regards to virtualization. Source: VMWare KnowledgeBase

New answer, powershell

TCP

Get-Process -Id (Get-NetTCPConnection -LocalPort YourPortNumberHere).OwningProcess

UDP

Get-Process -Id (Get-NetUDPEndpoint -LocalPort YourPortNumberHere).OwningProcess

Old answer, cmd

 C:\> netstat -a -b

(Add -n to stop it trying to resolve hostnames, which will make it a lot faster.)

Note Dane’s recommendation for TCPView. It looks very useful!

-a Displays all connections and listening ports.

-b Displays the executable involved in creating each connection or listening port. In some cases well-known executables host multiple independent components, and in these cases the sequence of components involved in creating the connection or listening port is displayed. In this case the executable name is in [] at the bottom, on top is the component it called, and so forth until TCP/IP was reached. Note that this option can be time-consuming and will fail unless you have sufficient permissions.

-n Displays addresses and port numbers in numerical form.

-o Displays the owning process ID associated with each connection.