Как убрать тиринг windows 10

Как я раньше(и судя по всему ошибочно) полагал, разрыв изображения возникает, когда кадров больше, чем может отрисовать монитор. В итоге столкнулся я с разрывом на Valorant, где ноут с небольшой 1050 мог в целом обрабатывать эту игру с частотой более чем 100 кадров в секунду(монитор лишь 60Гц). В итоге почитав разные рецепты, я понял, что ограничив частоту кадров, можно избавиться от этой проблемы. Удивление было, когда ни ограничение частоты кадров в самой игре, ни ограничение частоты кадров в драйвере нвидиа ни сколько не помогло. Разрывы так же остались. В чём может быть причина и как от этого можно избавиться?

P.S. Vsync не хочется включать, т.к. увеличивается инпут лаг. Хотя он решает проблему разрывов.

Are you annoyed by screen tearing when you use your computer? It becomes worse for gamers when they observe screen tearing. Screen Tearing is a kind of disturbance that may occur on your PC’s monitor. It is one of the worst nightmares for gamers. So what is screen tearing? How to fix screen tearing? Is it easy to solve this problem? These are the questions that we are going to answer in this article.

Screen tearing is not a dangerous issue, but there are several reasons for it to occur. We have provided some easy steps that you should follow to solve the problem. Before going to the part of solutions, let us understand what screen tearing is and its causes. Without further ado, let us go into the topic.

What Is Screen Tearing And What Causes It?

Screen Tearing is a kind of display distortion that occurs on the PC’s monitor. The effects of screen tearing can disturb the representation properties of the monitor. The consequences include,

• A horizontal line appears while playing videos or games 
• Multiple frames are observed on a single screen
• Corners of the monitor emit a small amount of light (this is the reason to say the word “tearing”), and more.

Screen Tearing is directly related to the graphical properties of the system. It occurs when the graphical processor is not in sync with the display. In terms of application, when a video being fed to the PC is not in synchronization with the refresh rate of the monitor, screen tearing will occur. The graphical processor will not keep up with the refresh rate of the monitor if it is under a heavy load. The outcome is that part of the screen is redrawn on one edge and the remainder of the screen is redrawn in another. On the off chance that this proceeds for numerous edges, an observable vertical line will show up on the screen. 

Now, let us find how to fix screen tearing.

12 Easy Way To Fix Screen Tearing In Windows 10

Method 1: Restart Your PC

Restarting your PC is one of the best ways to get any problem solved. Restarting your PC starts everything anew and frees the RAM. It might bring back the track of synchronizing your GPU and display. Close all your programs, games, other applications, and restart the system. After the restart, re-open the game that you were playing and see whether screen tearing is visible or not. If yes, continue playing! Your problem is solved. If not, then try the next method.

Method 2: Change Your Monitor’s Resolution and Refresh Rate

• Search for Resolution in the search bar of Windows
• Select the option Change the resolution of the display

• In the window, scroll down and select Advanced Display settings

• In the new screen, select Display Adapter Properties for Display 1

• A new window will open. Here, in the Adapter tab, click List All Modes

• Now, you will find a list of resolution & refresh rate options that are supportable by your PC. Here, try out other resolutions according to your graphics cards and device’s specifications. 

• Select one option and check if the screen tearing is observed
• If yes, change the resolution and check again
• Change the resolution until you don’t see any screen tearing and stay in that resolution

Method 3: Change The FPS Settings Of The Game

Screen tearing will occur if the refresh rate of your monitor is less but you play the game at a higher FPS. For example, a monitor that has 60hz as a refresh rate refreshes the screen 60 times per second. Therefore, it is only capable of outputting 60fps. It very well may be conceivable that you are playing the game on a higher FPS setting than your graphics card can uphold.  

Check Also: 10 Best Easy Way To Fix High Ping In Online Games In Windows 10

To fix this issue, go to the Settings menu in your game and look under video/illustrations settings. There, you will discover the alternative to change the FPS/Frame Rate. Attempt to make changes with the FPS esteem by letting down a touch and check if this tackles the issue. If this doesn’t work out, try the next method.

Method 4: Disable Game-Mode And Full Screen Optimization

The new Windows update comes with many features and one among them is the Game mode. But many users have complained that it causes the game to crash and also leads to screen tearing. So, disabling it might solve the problem

• Open Settings by pressing Win+I keys together
• In the list of settings available, select Gaming

• In that menu, select the Game bar option on the left side. 
• Then, disable the Record game clips, screenshots, and broadcast using the Game bar option

• Now, go back to the left side and select Broadcasting 
• On the right side, disable the Record audio when I broadcast option

• Close the settings and Restart your PC

After the restart, check whether screen bleeding occurs or not. If yes, try the next step to turn off full-screen optimization.

• Right-click on the icon on the game with which you are facing the screen tearing issue and click Properties

• In the new window that opens, go to the Compatibility tab, then select the Disable full screen optimization option
• Lastly, click on the Ok button

Method 5: Turn Off Frame Limit In The Game

One of the highlights numerous games and applications utilize is the Frame Limit alternative. If the Frame Limit is enabled, it very well might be causing the screen tearing issue. 

Search for Frame Limit choice in the in-game menu under the video or graphics segment and turn it off. If you find the issue even after changing these properties, revert to the default settings.

Method 6: Turn on Vertical Sync 

• Open the Intel HD Graphics Control Panel by pressing the  Ctrl + Alt + F12 buttons together
• Click 3D

• Select General Settings > Custom Settings.
• Select any Use Application Settings or On to enable Vertical sync

The upcoming methods are for people who use Nvidia graphics cards.

Method 7: Turn on/Turn off Nvidia VSync feature

Nvidia’s Vsync is an extraordinary tool for fixing graphical issues such as this screen tearing. Vsync automatically takes care of this issue when your GPU’s rendering speed is more than what your PC’s display can handle. Enabling this feature will help you in solving this issue. But at the same time, it can also cause this issue because Vsync is powerful for some systems which cannot handle it. So, disabling it might also solve the issue, Checking both the option will be good. To do so,

• Right-click on your PC’s screen and select the NVIDIA Control Panel option 

• The NVIDIA Control Panel window will pop up on the screen. On the left side, click the Manage 3D Settings option available under the 3D Settings section. 
• Now, on the right side, locate the Vertical Sync option and disable or enable it. 
• If it is already enabled but still you observe screen tearing, disable it and check whether the problem is solved.

Method 8: Update Graphics Driver

Screen Tearing can also occur if you have an old and obsolete graphical driver in your system. Updating the drivers might solve the issue.

• Right-click on the Windows icon 
• Click Device Manager

• Expand the Display Adapters section
• Right-click on the graphics card driver option and choose Update Driver

• Click on Search automatically for updated driver software
• Now, windows will look for the new version of the driver and installs it in your PC
• When the process is complete, restart your computer

If your drivers are already updated but still the issue is not solved, then uninstall and reinstall the driver. Follow the next method to do so.

Method 9: Uninstall/Re-Install Graphics Driver

• Right-click on the Windows icon 
• Click Device Manager

• Expand the Display Adapters section
• Right-click on the graphics card driver and click Uninstall Device

• Go to the website of your GPU manufacturer. Go to this website for Nvidia GPUs
• Install the latest driver that will be compatible with your Graphics Card 
• After the download process is completed, go to the downloaded location and install it manually by running the downloaded driver file on your PC.

Method 10: Turn on the “Wait for Vertical Refresh” option (For AMD users only)

 If you are an AMD user, then there is an option that you can use to get rid of screen tearing. 

• Right-click on your PC’s screen and select the AMD Control Panel option 
• Now, go to the Global Settings menu, then set the Wait for Vertical Refresh option to Always on

You can also try the methods 8 and 9 for AMD GPUs. Go to this website for getting the drivers.

Method 11: Turn off Smooth Scrolling In Browsers

Smooth scrolling is a good feature in browsers that allows scrolling webpages in a hassle-free experience. But sometimes it requires more GPU rendering power and causes screen tearing. Disabling it will be helpful.

In Chrome

• Open Chrome and type chrome://flags/#smooth-scrolling and press Enter
• Disable the smooth scrolling option

In Firefox

• Open Firefox and type about: preferences in the address bar and press Enter
• In the menu, remove the tick mark from Use smooth scrolling feature under the Browsing section

In Edge

• Open Run program by pressing the  Win + R keys together.
• Type “systempropertiesadvanced” and press Enter

• In the Performance tab, click Settings

• On the next screen, disable the smooth-scroll list boxes 
• Finally, press Ok 

Method 12: Set Launch Options in Steam (Only for Steam Users)

Game launch settings can be utilized to change game settings before running the game. Launch options permit the client to override the internal settings of the game. This is a viable way to heal from inconsistent video settings and well as investigating a wide scope of issues. 

This method covers setting game dispatch choices from Steam’s Library. Because many people use Steam as their Game Launcher since they buy games from the store, download them and launch them.

• Right-click on the game with issues and select Properties

• In the small window, click the Set Launch Options button

• In the new box that opened, type -windowed -noborder and click on the Ok button

Method 13: Upgrade your hardware

If any of the above-mentioned solutions didn’t work, it is advisable to upgrade your hardware. Buy the latest GPU or monitor and check whether both are compatible with each other. Buy a monitor that can handle higher frame rates,i.e, and the one that has higher refresh rates. Do this decision only if none of the solutions worked and you can afford to buy the devices. 

Conclusion

We’ve mentioned some different options to forestall screen tearing without utilizing V-Sync. These methods will sufficiently eliminate screen tearing. Try these steps one-by-one, and if one solution didn’t work, then move to the next solution. We hope that we have answered the question of how to fix screen tearing.

Screen tearing is a common problem that you could encounter on your computer. You can also address the problem of screen tearing by facing multiple frames in a single frame on your computer screen display.

The screen tearing issue is only experienced on computers where you have installed display hardware such as graphics cards.

What is the reason for screen tearing?

You experience screen tearing on your monitor when your Windows 10 PC is not synchronized with the refresh rate of your PC, and your display hardware shows the information from multiple frames in a single frame, which leads to screen tearing.

The users of the NVIDIA graphics card have complained about facing the issue of screen distortion. Moreover, if you play video games or watch videos using an NVIDIA graphics card, experiencing the screen tearing issue is quite common.

However, you can implement simple settings change like changing the resolution, game mode, full-screen optimization, or V sync to minimize screen tearing.

Therefore, you will only encounter the screen tearing issue on your monitor when your graphics card is heavily loaded. Therefore, the frame rate could not sync with your computer’s refresh rate, which results in the display of information from many frames in a single frame.

You can try to fix the screen tearing issue in many ways. However, you cannot resolve the screen tearing issue if the frame rates are not in sync due to your monitor’s hardware specifications. You could diagnose or replace your monitor with a g-sync monitor.

So if you are thinking about how to fix screen tearing? Here are some ways that you can try to solve the issue. Check out this article if you want Install Windows 10 on a Raspberry Pi 4

Try to restart your computer

The primary solution to the screen tearing issue is closing your game applications on your monitor and restarting your computer. Restarting your computer will make the frame rate get in sync with your PC’s refresh rate, which thereby helps solve the screen distortion problem.

Therefore, you can check whether the problem is solved after restarting your PC. If not, you can try another method for solving screen tearing.

Try to change the game FPS

If you face the problem of screen tearing while you are playing a game, then you could try and change the game FPS (frames per second). There are chances that you may be playing the game at a higher FPS than what your graphics card can support, and this may cause the screen to distort.

To change the game FPS, you need to open your game settings, and under ‘video/graphics’ settings, you will find the option of changing the frame rate or FPS. You can try and adjust the FPS setting by lowering it and simultaneously checking if it solves the problem.

Try to change the resolution and refresh rate

Another solution for fixing the screen distortion issue; you can try to change the resolution and refresh rate of your PC. You could follow these steps to change the refresh rate.

Step1- The first step is pressing the start button to your search box. Then, you could type ‘resolution’ to open the resolution settings and click on the screen resolution to change the display’s resolution.

Step2- After you click on the option to change the resolution of the display in your search results, a window will pop up, where you have to select ‘Advanced display settings.

Step3- After selecting the option of ‘Advanced display settings,’ you have to select the option of ‘display adapter properties for display 1.’

Step4- Once you click the option ‘display adapter properties’ under the display settings, a window will pop up, where you have to go under the ‘Adapter’ section and, in the left bottom corner click on the option of ‘List all modes.’

Step5- After clicking on the option of ‘List all modes,’ you will come across another window with a list of resolution and FPS modes, which are valid for your PC. Now, you need to check the different resolutions as per the specification of your graphics card and device. You need to check whether you still experience the screen tearing issue simultaneously.

Step6- After completing all the above steps, you can restart your computer to check whether the problem is solved.

Try to enable/ disable NVIDIA v-sync

If you are using the NVIDIA graphics card, you can use the NVIDIA V sync option, which is designed to handle issues like screen tearing. NVIDIA V sync option takes care of when your frame rate is higher than what your monitor’s display can handle.

You may still have not enabled the NVIDIA V sync option on your PC, and it is still disabled. However, if it is enabled, try to disable it to check if that fixes the screen tearing problem. Follow these easy steps for enabling or disabling the NVIDIA V sync option.

Step1- The first step is to go to your main desktop screen and make a right-click, where you will get a window with the option of NVIDIA control panel.

Step2- After you click on the option of NVIDIA control panel, a window will pop up. Now, on the left side of the NVIDIA control panel window, you need to click on the option of ‘Manage 3d settings’ under 3d settings and then go to the option of ‘Vertical sync’ on the right panel. You could right-click the vertical sync option to enable or disable it and apply it to save changes.

So, this was another solution for fixing the problem of screen tearing on your computer.

Try to turn off the game mode and full-screen optimizations

Game Mode is a new feature introduced in the latest Windows updates. Some of the features of this gaming mode are system optimizations, recording game clips, screenshots, broadcasts using the Game bar, and more. However, according to some users, these features lead to the problem of screen tearing.

Therefore, to solve the issues, you can try to disable game mode in your windows 10. Follow these steps to disable it.

Step 1- The first step is to go to your windows settings and click on the game section.

Step2- After you click on the gaming section, you need to click on the option of the game bar. Then on the right panel, you need to turn off the toggle switch of the option ‘record game clips screenshots, and broadcast using game bar’.

Step3- The next step for you is to select the broadcasting options, and under this option, you need to turn off the toggle switch of the option’ Record audio when I broadcast.’

Step4- Once you switch off the ‘record audio when I broadcast’ option, you can restart your computer to check whether the issue is solved.

However, if you still encounter the problem of screen tearing, then you can try to disable the fullscreen optimizations. Follow these steps to disable the full-screen optimizations.

Step1- Select the game for which you are experiencing the display tearing problem, right-click on the game icon, and select the option of ‘properties.’

Step2- After clicking on the properties option, a window will pop, where you need to go to the compatibility section and then choose ‘disable fullscreen optimization.

Now, try to rerun your game and check whether the issue is solved.

Try to update/reinstall the graphics driver

Another reason you are experiencing display tearing is because of broken or damaged graphics card drivers. Therefore, to solve this, you can update the driver on your PC. However, if it does not work, you can uninstall the drivers and then reinstall it. Follow these steps to implement this solution.

Step 1- The first step is to open the device manager by pressing the WIN+ X keys on your keyboard.

Step2- Under device manager, find display adapters and click on it. Under the adapters tab, right-click on the graphics card driver and then choose the update driver option.

Step3- After a new window pops up, you need to select the option of search automatically for updated driver software.

Now your computer will look for new updates. However, if it is already updated, then reinstall your driver. Follow these steps for reinstallation.

Step1- Under device manager, find display adapters and click on it. Under the adapters tab, right-click on the graphics card driver and then choose the option of uninstall device.

Step2- Now you can download the latest version of the driver that is compatible with your graphic card model. After downloading the driver, you can install the driver by running the file on your monitor.

Conclusion

If you are wondering how to fix screen tearing, you can easily follow the abovementioned ways to fix the issue. We hope you liked the ways to solve the issue, and also, if you know any other methods, then do tell us.

• Home
  
• Partition Manager
  
• How to Fix Screen Tearing on Windows 10

By Sherry |
Last Updated September 19, 2023

Are you bothered by the screen tearing when you play games? The cause of screen tearing is something related to display’s refresh rate. Fortunately, MiniTool offers some solutions about how to fix screen tearing.

Screen tearing is where the display hardware shows information from multiple frames in a single image. The cause of screen tearing is the desynchrony between the video which is fed to the system and the display’s refresh rate.

It could be quite annoying if screen tearing occurs when you are playing games. Don’t worry. Here are some solutions to help you solve it, and you can try them one by one until screen tearing on Windows 10 is fully removed.

Solution 1: Change Resolution and Refresh Rate

Considering that the cause of screen tearing is the refresh rate of monitor or incorrect resolution, you can try these steps.

Step 1: Press Win + S to open Search, and enter resolution in the box. Then click Change the resolution of the display from the results.

Step 2: Scroll down to the end and select Advanced display settings. In Advanced display settings, click Display adapter properties for Display 1 to configure your current display settings.

Step 3: You can see your hardware properties in the pop-up window. Just click List All Modes in the Adapter tab.

Step 4: Choose another valid mode and click OK. Then restart your computer and check if screen tearing on Windows 10 has been fixed.

Solution 2: Disable Game Mode and Full Screen Optimization

To helps users optimize their system and play any game more smoothly, Windows 10 offers a feature named Game Mode. It can deliver maximum performance to the game processing.

Besides, the Game Mode allows users to record the gameplay and enables them to take screenshots with a single button.

However, it could be the cause of screen tearing and game crashing. If you are wondering how to fix screen tearing, you can try to disable Game Mode.

Step 1: Press Win + I to open Settings.

Step 2: Disable Game Mode.

• Click Game bar from the left side and turn “Record game clips, screenshots, and broadcast using Game bar”
• Click Broadcasting and turn “Record audio when I broadcast”

Step 3: Restart the computer and check whether your game works well without screen tearing.

If you can still see screen tearing when you play games, you should disable the full-screen optimization of your game.

1. Right-click on your game icon and select Properties.
2. Select Compatibility tab and check Disable fullscreen optimizations.
3. Click Apply to save changes and then restart your computer.

Solution 3: Update Graphics Driver

Sometimes the out-of-date driver can also be the cause of screen tearing. Here’s how to fix screen tearing by updating graphics driver.

Step 1: Press Win + R to open Run window. Then type devmgmt.msc in the box and click OK to get into Device Manager.

Step 2: Double-click Display adapters to expand it.

Step 3: Right-click your graphics driver shown under Display adapters and choose Update driver.

Step 4: You will be asked how to search for drivers. Choose Search automatically for updated driver software. Then Windows will search online driver, and then download and install it automatically.

Step 5: After the latest graphics driver has been installed, you need to restart the computer and the screen tearing error should be fixed.

Of course, you can also use third-party software like Driver Easy Pro to detect problematical drivers, and then search, download, and install the latest driver version with just one click. Here is the guide:

Step 1: Install Driver Easy and launch it. Click the Scan Now button.

Step 2: After the scanning process is completed, click the Update All button to download and install the latest drivers for all devices with outdated drivers.

That’s all about how to fix screen tearing on Windows 10. Feel free to have a try if you are facing screen tearing when you play games or watch videos.

About The Author

Position: Columnist

Sherry has been a staff editor of MiniTool for a year. She has received rigorous training about computer and digital data in company. Her articles focus on solutions to various problems that many Windows users might encounter and she is excellent at disk partitioning. She has a wide range of hobbies, including listening to music, playing video games, roller skating, reading, and so on. By the way, she is patient and serious.