Как настроить роутер d link dir 605l

Дать ссылку друзьям:

Рейтинг: Пока без рейтинга

Version 3.10(EU) | 12/02/2014

User Manual

Wireless N 300 Cloud Router

Preface

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.

Manual Revisions

3.00July 21, 2014 • B2 hardware revision

Trademarks

D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.

Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc.

Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.

Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.

Copyright © 2014 by D-Link Corporation, Inc.

All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.

Table of Contents

Table of Contents

Section 1 — Product Overview

Package Contents

Power Adapter

Note: Always attach the power cord plug to the power supply, before inserting the power cord and connected power supply to the wall outlet. Using a power supply with a different voltage rating than the one included with the DIR-605L will cause damage and void the warranty for this product.

Section 1 — Product Overview

System Requirements

Section 1 — Product Overview

Features

•Faster Wireless Networking — The DIR-605L provides up to 300 Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio.

•Compatible with 802.11b and 802.11g Devices — The DIR-605L is fully compatible with the IEEE 802.11b and IEEE 802.11g standards, so it can connect with existing 802.11b and 802.11g wireless adapters and devices.

•mydlink Cloud Service — The DIR-605L features a new mydlink cloud service that pushes information such as firmware upgrade notifications, user activity, and intrusion alerts, to the mydlink app on Android and iPhone, iPad, and iPod touch devices. You can monitor a user’s online activity with real-time web-browsing history, maintaining a safe and secure environment, especially for children at home. To ensure that your router is up- to-date with the latest features, mydlink will also notify you when an update is available for your router.

•Easy Setup Wizard — Through its easy-to-use web-based user interface, the DIR-605L lets you control what information is accessible to those on the wireless network, whether from the Internet or from your internal network. Simply configure your router to your specific settings within minutes.

*Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.

Section 1 — Product Overview

Hardware Overview

LEDs

Section 1 — Product Overview

Hardware Overview

Connections

Section 2 — Installation

Installation

This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage.

Before You Begin

•Please configure the router with the computer that was last connected directly to your modem.

•You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).

•If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or Enternet 300 from your computer or you will not be able to connect to the Internet.

•When running the Setup Wizard, make sure the computer is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the modem and make sure you are online.

Section 2 — Installation

Wireless Installation Considerations

The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

1.Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum — each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

2.Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.

3.Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.

4.Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.

5.If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.

Section 2 — Installation

Connect to Cable/DSL/Satellite Modem

If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:

1.Place the router in an open and central location. Do not plug the power adapter into the router.

2.Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down your computer.

3.Unplug the Ethernet cable (that connects your computer to your modem) from your computer and plug it into the WAN port on the router.

4.Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your computer.

5.Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).

6.Connect the power adapter to the router and plug it into an outlet or power strip. Wait about 30 seconds for the router to boot.

7.Turn on your computer.

8.Verify the link lights on the router. The Power, Internet, and the LAN LEDs (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct.

9.Go to page 9 to configure your router.

Section 3 — Configuration

Configuration

Easy Setup Wizard

This section will show you how to configure your new D-Link wireless router using the Easy Setup Wizard.

Step 1: To access the configuration utility, open a Web browser such as Internet Explorer and enter the IP address of the router (192.168.0.1) or http://dlinkrouter.local./

Step 2: Select your preferred language and click Start.

Step 3: Select Auto Configuration (or Manual Configuration if you wish to manually configure your settings) and click Next to continue.

Step 4: If you selected Auto Configuration, the router will detect your Internet type.

Section 3 — Configuration

Step 5: You can configure your custom wireless settings on the next screen. Click Next when you are done.

Step 6:You can change the username and password for your router’s administrator account. Click Next when you are done.

Step 7: Select the Time Zone for your location. Click Next to save the settings. The “Easy Setup Complete” page will display your configuration summary.

Step 8: Click Setting next to“mydlink Account”to proceed to setup mydlink service;

OR

Click Complete to skip mydlink and store your settings.

Section 3 — Configuration

Step 9: If you do not have a mydlink account, click No, I want to register with a new mydlink account and complete the registration form.

Click Register.

OR

If you already have a mydlink account, click Yes, I have a mydlink account and enter your account name and password.

Click Login.

Step 10: On the next screen, there will be a note indicating mydlink service is activated and the status will show “Connected”. You have completed the setup wizard and can click Manual Setup to continue to the management UI or simply close your browser.

Section 3 — Configuration

The next time you access the router’s IP from your browser, you will need to log in with the username and password for the administrator account. Click Login.

The current network settings will be shown and you can click Manual Setup to continue to the management UI for further configuration.

Section 3 — Configuration

After the router is connected to mydlink service, you can download the“mydlink Lite”app from Google Play or App Store for your mobile device!

After installation, simply log in with your mydlink account details and you can manage your router from anywhere!

Section 3 — Configuration

Internet Connection

Static IP (assigned by ISP)

Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in this format. Click Save Settings to apply them.

IP Address: Enter the IP address assigned by your ISP.

Subnet Mask: Enter the subnet mask assigned by your ISP.

Default Gateway: Enter the gateway assigned by your ISP.

MAC Address: The default MAC address is set to the WAN’s physical interface MAC address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP.

You can use the Copy Your PC’s MAC Address button to copy the MAC address of the Ethernet card installed by your ISP and replace theWAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP.

Primary DNS Enter the primary DNS server IP address assigned by your ISP.

Server:

Secondary DNS Enter an optional secondary DNS address.

Server:

MTU: Maximum Transmission Unit — you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU.

Section 3 — Configuration

Internet Setup

Dynamic IP (DHCP)

To manually set up the Internet connection, click the Manual Internet Connection Setup button on the router’s opening window. Click Save Settings to apply them.

Dynamic IP Choose Dynamic IP Address to obtain IP address information Address: automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is

commonly used for cable modem services.

Host Name: The host name is optional but may be required by some ISPs. The default host name is the device name of the router and may be changed.

DIR-605L

MAC Address: The default MAC address is set to the WAN’s physical interface MAC address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP.

You can use the Copy Your PC’s MAC Address button to copy the MAC address of the Ethernet card installed by your ISP and replace theWAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP.

Primary and Enter the primary and secondary DNS (Domain Name

Secondary DNS Server) server IP addresses assigned by your ISP.

Servers:

MTU: Maximum Transmission Unit — You may need to change the

MTU for optimal performance with your specific ISP.

Section 3 — Configuration

Internet Setup

PPPoE

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. Click Save Settings to apply them.

PPPoE: Select Dynamic IP (most common) or Static IP. Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.

User Name: Enter your PPPoE user name.

Password: Enter your PPPoE password, then retype the password in the next box.

Service Name: Enter the ISP service name (optional).

IP Address: Enter the IP address (Static PPPoE only).

MAC Address: The default MAC address is set to the WAN’s physical interface MAC address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP.

You can use the Copy Your PC’s MAC Address button to copy the MAC address of the Ethernet card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP. Tick Receive DNS from ISP or Enter DNS Manually depending on your ISP.

Section 3 — Configuration

User Name: Enter your PPTP account name.

Password: Enter your PPTP password, then retype the password in the next box.

Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity.

MTU: Maximum Transmission Unit — You may need to change the MTU for optimal performance.

Connect Mode: Select either Always-on, Manual, or Connect-on demand.

Section 3 — Configuration

Internet Setup

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.

L2TP: Select Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.

L2TP IP Address: Enter the IP address (Static L2TP only).

L2TP Subnet Enter the primary and secondary DNS server addresses

Mask: (Static L2TP only).

L2TP Gateway Enter the gateway IP address provided by your ISP.

Address:

Primary DNS The DNS server information will be supplied by your ISP

Server: (Internet Service Provider.)

MAC Address: The default MAC address is set to the WAN’s physical interface MAC address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP.

You can use the Copy Your PC’s MAC Address button to copy the MAC address of the Ethernet card installed by your ISP and replace theWAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP.

L2TP Server IP Enter the server IP address provided by your ISP (optional).

Address:

Section 3 — Configuration

User Name: Enter your L2TP account name.

Password: Enter your L2TP password, then retype the password in the next box.

Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this

feature, enable Auto-reconnect.

MTU: Maximum Transmission Unit — You may need to change the MTU for optimal performance with your specific ISP.

Connect Mode Select either Always-on, Manual, or Connect-on demand.

Select: