Just a moment windows 11

Have you ever felt the frustration of getting stuck on a never-ending loading screen? Well, imagine the anticipation of setting up the brand new Windows 11, only to be halted by the notorious “Just a moment” screen.

It’s enough to make anyone’s blood boil. But fear not, dear reader, for today we dive into the depths of troubleshooting and offer you a lifeline out of this technical nightmare.

In this article, we will explore various solutions to combat this issue, ranging from simple USB disconnects to performing a fresh Windows 11 installation. So, grab your keyboard and mouse, buckle up, and let’s navigate our way to a smooth setup experience.

Troubleshooting Steps For “Just A Moment” Screen Stuck Issue

If you encounter the frustrating issue of Windows 11 getting stuck on the “Just a moment” screen during setup, there are several troubleshooting steps you can take to resolve the problem. Here are the recommended actions to try:

1. Unplug all USB devices and disable network connections: Sometimes, external devices or network connections can interfere with the setup process. Disconnecting all USB devices and disabling network connections can help eliminate these potential obstacles.
2. Try reconnecting mouse and keyboard, restore internet access, and repeat if necessary: In some cases, the issue might be related to a loose connection with your mouse or keyboard. Try unplugging and reconnecting them properly.

   Additionally, make sure you have a stable internet connection during the setup process.

3. Perform a hard shutdown if previous steps fail: If the previous steps do not resolve the issue, a hard shutdown might be necessary. Hold down the power button to completely shut down your computer, then power it back on and attempt the setup process again.
4. Disconnect and reconnect power for desktop, remove and reattach battery for laptop: If you are using a desktop computer, try disconnecting and reconnecting the power source. For laptops, remove the battery and reattach it.

   This step can help reset the hardware and potentially resolve any underlying issues.

5. Consider performing a fresh installation of Windows 11 using a bootable disk or USB drive: If all else fails, you might need to perform a fresh installation of Windows 11. This can be done using a bootable disk or USB drive.

   Ensure you have a backup of your important files before proceeding with this option, as it will erase all existing data on your system.

Resolving Hardware And Network Connection Problems

In some cases, the issue might be related to specific hardware or network connection problems. Here are some additional troubleshooting steps to resolve these issues:

1. Check for faulty hardware: Make sure all your hardware components, such as the mouse, keyboard, and display, are in good working condition. Replace any faulty hardware if necessary.
2. Update drivers: Ensure that all your device drivers are up to date. Outdated or incompatible drivers can cause various issues during the setup process.

   Visit the manufacturer’s website for your hardware devices and download the latest drivers available.

3. Test network connectivity: If you are experiencing network-related issues during setup, test your network connectivity. Restart your modem or router, ensure all cables are securely connected, and check for any error messages.

   If the problem persists, consider contacting your internet service provider for assistance.

Additional Options For Windows 11 Setup Issues

If the previous troubleshooting steps do not successfully resolve the “Just a moment” screen stuck issue during Windows 11 setup, you might consider exploring alternative options. Here are a few additional suggestions:

1. Perform a system restore: If you recently installed any programs or made system changes that could be causing the issue, perform a system restore to a previous point when Windows was functioning correctly. This can help revert any problematic changes and restore your system to a stable state.
2. Seek expert advice: If you are not confident in troubleshooting the issue yourself, it might be wise to seek expert advice. Consider reaching out to a knowledgeable friend or contacting Microsoft support for further assistance.

While these troubleshooting steps and options can be helpful in resolving the “Just a moment” screen stuck issue during Windows 11 setup, it is important to note that they might not work in every case. For more in-depth information and specific remedies for login issues and the “Just a moment” loop in Windows 10, refer to other articles available online.

Setting up Windows 11 can be a complex process, but once you get through the initial setup hurdles, you can enjoy the many benefits it offers. Windows 11 comes with a range of new features and improvements designed to enhance user experience.

To fully utilize these features, it is recommended to create a Microsoft account during the setup process.

A Microsoft account allows you to sync your settings across devices, making it easier to access your personalized configurations on any Windows 11 device. It also provides seamless integration with Microsoft products and services, such as Microsoft Office, Microsoft Outlook, and Microsoft Teams.

Having a Microsoft account allows you to enjoy a more integrated and seamless computing experience.

Moreover, a Microsoft account comes with 15GB of free online storage through OneDrive. This cloud storage solution offers secure and convenient access to your files from anywhere with an internet connection.

Whether you need to access important documents on the go or share files with others, OneDrive provides a reliable and efficient solution.

In conclusion, if you find yourself stuck on the “Just a moment” screen during Windows 11 setup, there are several troubleshooting steps you can take to resolve the issue. From unplugging USB devices and disabling network connections to performing a hard shutdown or reinstalling Windows 11, these steps can help you overcome the problem.

Additionally, ensuring hardware and network connections are in good condition and exploring alternative options can further assist in resolving the issue. By following these troubleshooting steps, you can overcome the hurdle and begin enjoying the benefits of Windows 11.

When we install an update or reinstall the OS, our system shuts down, and the installation process begins. During the installation, it shows a “Just a Moment” screen, which simply means the computer is almost ready to use, and we can now see the sign-in screen anytime.

But sometimes, it sticks to the same screen and doesn’t let us use it for hours. If your Windows 11 PC is also stuck at this screen, try the workarounds we’ve shared in this troubleshooting guide to fix the Windows 11 Stuck on Just a Moment screen.

Several reasons could make your Windows 11 PC or laptop freeze at the “Just a Moment” screen. Here in this section, we’ll share the most common reasons for this annoying issue:

• SSD Isn’t Properly Installed
• Issues With USB Drive
• Unnecessary Hardware
• Incorrect BIOS Settings
• Wrong Boot Order
• Corrupted System Files
• Issues With BCD

Fix Windows 11 Stuck on Just a Moment

Here in this section, we’ve shared potential workarounds to help you resolve the stuck “Just a Moment” screen. You can follow all the mentioned fixes and see what works for you:

1. Hard Shut Down Your PC

The most common and the easiest way to fix the stuck “Just a Moment” screen in Windows 11 is to hard reboot the PC. This will forcefully close the Windows 11 PC. So follow the below steps to hard reboot your Windows 11 PC and check if the computer starts normally:

1. Find the Power button on your PC or laptop and press & hold it for 10 to 15 seconds. If you have a laptop, you may find it on the edge of it and also on the middle front of it.

2. After doing so, your Windows 11 computer will shut down. Now, wait a minute or two to completely stop the power supply to all the components. Once the estimated time is completed, press the Power button to boot your Windows 11 PC. After booting the system, do the same thing again and check if it still freezes at the “Just a Moment” screen.

2. Make Sure That Your SSD Is Properly Installed

One reason for your Windows 11 computer being stuck to the “Just a Moment” screen could be an improperly mounted SSD. This is because many users faced this problem after installing a new HDD or SSD on their Windows 11 PC.

Therefore, we suggest you make sure your SSD or HDD is properly installed. But only do this if you have a Windows 11 PC. In case you have a laptop, take the help of a PC technician to ensure the same.

3. Try Using a Different USB Drive

It could be possible that the USB drive you’re using to create the installation media has some faults. Otherwise, it may not be compatible, which is why your Windows PC got stuck at “Just a Moment” screen.

To check if this is the reason for this issue, consider using a different USB drive to make a new installation media to install Windows 11 on your PC.

4. Disconnect All Unnecessary Hardware

If you’ve connected a device to your PC that you aren’t currently using, simply remove it, as sometimes, unnecessary hardware leads to these kinds of problems. It could be possible that it’s faulty, which is causing this issue. So try this and check if the issue is resolved.

5. Resetting the BIOS Settings

It could be possible that your Windows 11 PC’s BIOS settings are wrongly configured, due to which it got stuck at the “Just a Moment” screen. Thus, we suggest you restore the BIOS settings to the default state. The process to reset the PC’s BIOS may differ from brand to brand. But we still have added basic steps to reset the BIOS settings to default values:

Note: If you want to know the exact steps to do this, check your manufacturer’s knowledge base.

1. To factory reset your PC’s BIOS settings, first access your Windows 11 PC’s BIOS settings. Below, we’ve mentioned some quick links to access BIOS settings in varied OEMs:

• Lenovo
• MSI (Check the Related Articles Section)
• HP
• Dell
• Asus

2. Once you’re there, proceed to its Security tab and click the Load defaults or similar button.

3. After restoring the settings, use your keyboard to click Save and Exit and then exit BIOS.

4. Lastly, boot your Windows 11 PC and check if it’s now starting properly without any freeze.

6. Change the Boot Order

Microsoft says that to install the new Windows 11, your system should come with UEFI with Secure Boot and TPM enabled. You can’t install Windows 11 on PCs with Legacy Mode, as it doesn’t support Secure Boot, which is necessary to do this.

So, it could be possible that Legacy Mode is enabled on your PC, which is why it got stuck on this screen. So, change it to UEFI and check if it fixes the issue. You can find the steps to do so below:

1. To change your Windows 11 computer’s boot order to UEFI, you must enter the BIOS area.

2. Once there, go to the Boot Maintenance Manager section and click Advanced Boot Options.

3. In the end, click the Boot Mode option, set it to UEFI, and then save the above changes.

7. Try Automatic Repair

Windows comes with the Automatic Repair functionality that enables you to find and fix issues with Windows startup. We suggest you run this troubleshooter on your PC and check if it fixes the issues.

You can find this option in your Windows 11 PC or laptop’s WinRe area. So, follow the below-mentioned prompts to know how to use it in Windows 11:

1. Enter your PC’s WinRe area and choose the Troubleshoot option on the Choose an option screen.

2. Choose Advanced options and then choose the Command Prompt option to open it.

3. In the Command Prompt window, copy-paste the following command and press the Enter key:

cd C:\windows\system32\config

4. Then, execute the md backup command in the following window to create a new backup.

5. After running the above command, execute copy *.* backup to copy all system config files.

6. Copy-paste the cd regback command in it and hit the Enter key to open the regback folder.

7. Run the copy *.* .. command in it to copy all files in regback to the system config folder.

8. Press the A key on your keyboard to select all from the input prompt to overwrite all files.

That’s it!

If the above-mentioned workarounds helped you get rid of that annoying screen, well and good. In case they didn’t help, try the below-mentioned workarounds. But, to try them, you must be logged into your PC.

To do so, you need to enter your Windows PC’s WindowsRE and then enter Safe Mode from there. We’ve already stated the steps to do so in the above solution. You can now follow the below-mentioned steps to enter the Safe Mode:

1. On the Choose an option screen, select the Troubleshoot tile and then Advanced Options.

2. On the next screen, choose the Startup Settings option and then click the Restart button.

3. After clicking the Restart button, your Windows 11 PC will now restart and show a list of options related to Safe Mode. You need to press F5 to enter Safe Mode with network rights.

8. Try Running the Installation in Safe Mode

Once you’ve entered Safe Mode, try running the Windows installation process again, as it could be possible that earlier, a third-party program or service was causing this problem.

9. Run SFC & DISM Scans

It may be possible that your Windows 11 PC’s integral files have been corrupted, which is why it freezes at the “Just a Moment” screen when installing a Windows update. To check whether it’s the main reason, run an SFC and DISM scan on your PC to repair all the corrupted system files and image. You can follow the mentioned steps to run these scans on your PC:

1. Launch the elevated Command Prompt on your Windows PC and run the below command in it:

DISM /online /cleanup-image /checkhealth

2. After executing the above command, run the following command in the same console window:

DISM /Online /Cleanup-Image /RestoreHealth

3. Once the DISM scan is completed, run the sfc /scannow command in it and let it finish.

4. Once both system scans are finished, start the installation again and check the issue’s status.

10. Start an Antivirus Scan

It could be possible that your Windows 11 PC has some viruses, which is why it gets stuck at the “Just a Moment” screen. Considering this, run an antivirus scan on your system to find and delete malware. You can try the below-mentioned steps to know to do this:

1. Press the Windows key to open the Windows search and enter Virus & threat protection in it.

2. Choose the Virus & threat protection option from the search results under Best match.

3. In the Virus & threat protection window, click the Quick scan button to start the virus scan.

4. You need to wait for the mentioned time for the virus scan to complete. Once the quick virus scan is completed, remove the infected files from your PC and check if it fixes the issue.

11. Rebuild BCD

Another easy workaround to get rid of the “Just a Moment” screen in Windows 11 is to rebuild the BCD, also known as Boot Configuration Data, as it could be possible that it’s malfunctioned. So follow the steps mentioned below to rebuild it and get over this screen:

1. Right-click the Windows icon on your PC’s taskbar and choose Terminal (Admin) from it.

2. In the Terminal window, copy-paste the bootrec /RebuildBcd command and press the Enter key to start restoring the missing, misconfigured, or corrupted boot configuration data. 

3. Once the above command is executed, run bootrec /fixmbr in it to fix corrupt master boot record.

4. Run the bootrec /fixboot command in the same console and restart your PC or laptop.

12. Disable Automatically Restart

One reason for PCs being stuck to the “Just a Moment” screen could be the enabled Automatically Restart option. Considering this, disable Automatically Restart on your Windows 11 PC and check if it helps you get rid of the same screen that comes while installing updates. You can follow the below-mentioned steps to know how to disable this feature:

1. Press Windows + R to open the Run utility on your Windows PC and type control in its search box.

2. Press the Enter key on your keyboard to open the Control Panel utility on your PC or laptop.

3. In Control Panel, choose the System and Security option and select the System option.

4. Choose the Advanced system settings option from the left panel of the Settings app.

5. Go to the Advanced tab, and under Startup and Recovery, click Settings to open a new window.

6. Untick the box next to the Automatically restart checkbox in the System failure section.

7. Lastly, click OK and then click Apply in the System Properties window to save the changes.

13. Make Changes To the Registry Editor

If turning off the Automatically Restart function on your system doesn’t resolve the issue, consider making the below-mentioned changes to your PC’s profiles with Registry Editor:

1. Open the Run utility on your Windows 11 PC using the Windows + R keyboard shortcut.

2. Type regedit in the Run’s search box and press the Enter key to open the Registry Editor.

3. Once Registry Editor is opened, navigate to the below-mentioned path in it from the left:

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

4. In the left navigation pane of the utility, select the first folder under the ProfileList directory.

5. After selecting the folder, look for the ProfileImagePath key on the right and right-click on it.

6. From the right-click or context menu, choose the Delete option to delete the key from your PC.

7. Once done, navigate to other similar folders and delete the same registry key from there.

8. In the end, exit the Registry Editor and restart your system to check the problem’s status.

14. Update Your PC

One of Microsoft’s Independent Advisors suggested users update their PC, as pending Windows updates can also fix the issue. So try the same by following the below-listed steps:

1. Use the Windows + I shortcut to launch the Settings app, and choose the Windows Update option.

2. On the Windows Update screen, select Check for updates to scan new Windows updates.

3. In case it shows pending updates to install, click the respective button to download and install it.

15. Reset the PC

If none of the above-mentioned workarounds help you pass on the “Just a Moment” screen, consider resetting your Windows 11 computer back to the default values and see if it helps.

In most cases, it does, as it has helped many users resolve this issue with ease. So follow the below-mentioned steps on your PC to factory reset your Windows 11 PC:

1. Navigate to Recovery of your PC’s Settings app and select Reset PC under Recovery options.

2. Click the Remove everything button in the next window and select the Local download option.

3. Finally, follow the on-screen instructions to reset your Windows 11 computer back to default.

FAQs

How Long Does Just a Moment Take Windows 11?

The “Just a Moment” screen in the latest Windows 11 usually appears for 5 to 20 minutes.

Why Is My Computer Screen White on Windows 11 Just a Moment?

It could be possible that your Windows 11 PC’s integral files have been corrupted, which is why it’s stuck at the “Just a Moment” screen for so long. Other possible reasons could be issues with BCD, wrong boot order, issues with USB drive, incorrect BIOS settings, etc.

What to Do if Windows Is Stuck on Just a Moment?

If your Windows 11 PC is stuck at the “Just a Moment” screen, then consider hard rebooting it. In case this doesn’t work, simply reset your Windows 11 PC to quickly get rid of it.

Why Is Windows 11 Install Stuck?

Peripheral devices and incompatible programs are the most common reasons for the Windows 11 installation stuck at 35%, 85%, and 100%. Another possible reason could be junk PC files.

How Long Is Window 11 Free for?

The new Windows 11 is free for a lifetime. You can get its basic version without paying anything.

Conclusion

Getting stuck on the “Just a Moment” screen in Windows 11 while installing a Windows update is very annoying. Luckily, it’s very easy to eliminate this issue by applying a few fixes.

Here in this troubleshooting guide, we shared all the tips in detail to fix the Windows 11 stuck on Just a Moment issue. We hope this guide assisted you in passing this screen. If yes, then do let us know which of the above-mentioned workarounds helped you do the same.