It looks like windows didn t load correctly что делать

If you see an error message It looks like Windows didn’t load correctly in Windows 11/10 while trying to boot or recover your operating system, you can follow these troubleshooting tips to get rid of this issue. This error may appear randomly due to some corrupted system or boot files.

It looks like Windows didn't load correctly in Windows 11/10

The entire error message says something like this:

It looks like Windows didn’t load correctly

If you’d like to restart and try again, choose “Restart my PC” below. Otherwise, choose “See advanced repair options” for troubleshooting tools and advanced options. If you don’t know which option is right for you, contact someone you trust to help with this.

To fix the It looks like Windows didn’t load correctly error in Windows 11/10, follow these steps:

  1. Restart your PC
  2. Rebuild BCD
  3. Run Automatic Startup Repair
  4. Use System Restore point
  5. Troubleshoot in Safe Mode

To know more about these solutions in detail, keep reading.

1] Restart your PC

It is the very first thing you need to do when you are getting the aforementioned error. At times, a simple restart fixes countless problems within moments. If a bug is causing this issue in Windows 11 or Windows 10 PC, you may be able to bypass it by restarting your computer.

To restart your computer, you do not need to use the physical restart button. Instead, you can click on the Restart my PC button visible on the error screen.

It will restart your computer immediately and allow you to sign in to your user account. However, if you are still getting the same error message frequently, you need to go through the subsequent solutions.

Read: Windows PC will not boot up or start

2] Rebuild BCD

BCD or Boot Configuration Data is one of the most important things to start or boot your computer. Whether it is the installation or the regular start of the system, you must have the BCD intact in order to get a smooth system. However, if there are some issues with the Boot Configuration Data, you may encounter the aforementioned issue.

That is why it is recommended to rebuild the BCD or Boot Configuration Data. The best thing is that you do not need third-party apps, and it is possible to do that with the help of the Command Prompt. For that, you need to click on the See advanced repair options and choose the Command Prompt option.

Then, enter the following command and hit Enter:

bootrec /rebuildbcd

Read: Windows computer unable to boot to BIOS

3] Run Automatic Startup Repair

winre-windows-8-3

Run Automatic Startup Repair and see if that works for you. Clicking on the See advanced repair options button that you see on the error screen may help you get there quickly.

Read: Windows does not boot after compressing System Drive

4] Use System Restore point

Fix 0xc0000094 error on Windows computer

If there are some corrupt system files, you must use the System Restore point to restore your computer to an earlier point when there was no issue. However, this solution works only when you created a System Restore point in the past. If so, you can follow this guide to restore your computer using System Restore point.

You may need to boot into Windows with your Windows Installation Media or Recovery Drive and select Repair your computer to enter Troubleshoot > Advanced Startup Options > Command Prompt. You can now use the System Restore option or CMD to run commands.

Read: Windows computer won’t boot after System Restore

4] Troubleshoot in Safe Mode

Can you boot in Safe Mode? If you can, then it makes things easier. If you have recently installed any driver or software, you can boot Windows in Safe mode and troubleshoot. If you had already enabled the F8 key earlier, things are easier as you press F8 while booting, to enter Safe Mode.

At times, a corrupt or incompatible driver can also cause the same issue. In such situations, using the Safe Mode is probably the best and most straightforward solution you have.

How do you fix Recovery It looks like Windows didn’t load correctly?

To fix the It looks like Windows didn’t load correctly error, you need to use the aforementioned solutions. First, you can restart your computer to check if it resolves the problem or not. Then, you can rebuild the BCD, use the System Restore point and troubleshoot the issue in the Safe Mode.

Why does my computer say It looks like Windows didn’t load correctly?

If there are some corrupt system files, your Windows computer may display that message on your screen. The other reason is the corrupt Boot Configuration Data. In that case, you can simply rebuild the BCD on your computer using the bootrec /rebuildbcd command.

Hope this guide helped.

Read: How to boot to Windows Recovery Environment to fix problems?

“Recovery it looks like Windows didn’t load correctly” is a common error message during the PC startup process in Windows 11/10. If you are hit by this issue when booting your Dell or Lenovo, take it easy and MiniTool collects multiple methods to fix it easily.

It Looks Like Windows Didn’t Load Correctly Windows 11/10 Dell/Lenovo

According to users who are using a Dell or Lenovo, the error message “Recovery it looks like Windows didn’t load correctly” appears on your computer when trying to boot or recover the PC. Sometimes your PC accidentally stops working with a blue screen and after a restart, you get the error. Sometimes Windows not loading correctly appears randomly. See an example from a Windows 11 user:

Windows didn’t load correctly

The screen gives you two options – See advanced repair options and Restart my PC. To troubleshoot the issue, click the first one. If you would like to restart and try again, click the second one. The error screen is shown below:

recovery it looks like Windows didn’t load correctly

This issue is mainly triggered by damaged Windows files, missing/corrupt BCD, compromised system integrity, etc. It usually happens on Windows 11, 10, and 8. After knowing the reasons to some extent, you can find out how to fix them. Of course, some other solutions are also can help. Now, let’s go to the next part to figure out what you should do.

Tips:

Sometimes you see another error when performing an automatic repair – “Automatic Repair, Your PC did not start correctly.» To find solutions, refer to this post — 7 Solutions: Your PC Did Not Start Correctly Error in Windows 10.

Fixes for It Looks Like Windows Didn’t Load Correctly Dell/Lenovo

Enter Safe Mode

Safe Mode is a diagnostic mode in Windows and it boots the system with the minimum drivers and services. When it comes to PC troubleshooting, entering Safe Mode is a safe and reliable way. If you are plagued by the issue of Windows not loading correctly, try this way.

Step 1: On the Recovery page, click on See advanced repair options to enter the troubleshooting interface. Alternatively, you can restart your PC several times when seeing the Windows logo to enter the WinRE page.

Step 2: Click Troubleshoot > Advanced options and you can see several options.

Step 3: Click Startup Settings > Restart. Then, you see the following figure and press F4 or F5 to open Safe Mode.

Windows 10 Safe Mode

In Safe Mode, you can run a quick diagnostic, for example, uninstall suspicious software or a recently installed driver. To uninstall the driver, go to Device Manager, locate the driver, and right-click on it to choose Uninstall device. To uninstall an app, go to Control Panel > Uninstall a program, right-click on the program and choose Uninstall.

After that, restart your Dell or Lenovo PC to see if the error “it looks like Windows didn’t load correctly” is fixed. If not, continue the troubleshooting.

Turn Off Hybrid Sleep

According to some users, the Hybrid Sleep feature can cause the error of Windows not loading correctly in Windows 10/11. To fix this issue, make sure you disable Hybrid Sleep and see how to do it:

Step 1: In Safe Mode, type Control Panel into the search box and click this app to open it. View items by large icons.

Step 2: Click Power Options > Change plan settings.

Step 3: Click the Change advanced power settings link to open the Advanced settings tab.

Step 4: Expand Sleep > Allow hybrid sleep and then change On to Off.

disable Hybrid Sleep

Step 5: Click Apply > OK.

Run SFC and DISM Scans

Sometimes Windows not loading correctly is triggered by corrupted system files. To get rid of this issue from Windows 10/11, you need to fix the corruption in the Windows system. To do this work, System File Checker (SFC) is helpful. Besides, you can run a DISM scan to repair bad system images. See how to do the scans:

Step 1: In Safe Mode, type cmd to the search box, right-click on Command Prompt, and choose Run as administrator. Alternatively, you can boot the PC to WinRE and go to Troubleshoot > Advanced options > Command Prompt.

Step 2: Type sfc /scannow and press Enter to begin the scan. This scan will take some time and wait patiently.

sfc scannow Windows 10

Tips:

SFC isn’t always working and sometime it may get stuck. If you encounter this issue, go to find solutions from our previous post — Windows 10 SFC /Scannow Stuck at 4/5/30/40/73, etc.? Try 7 Ways.

Step 3: After the SFC scan, run a DISM scan. Just execute these commands one by one, as shown below. Remember to press Enter after each one.

Dism /Online /Cleanup-Image /ScanHealth

Dism /Online /Cleanup-Image /CheckHealth

Dism /Online /Cleanup-Image /RestoreHealth

Run CHKDSK

Sometimes the file system is corrupted or there are bad blocks on the hard drive, as a result, “Recovery it looks like Windows didn’t load correctly” appears on your Windows 11/10 PC. In this case, it is necessary to run the CHKDSK scan.

Step 1: Open Command Prompt (as shown in the above way).

Step 2: Type chkdsk /f /r and press Enter to check for file system errors and hard drive errors, and then fix the found errors and recover the readable information from the bad sectors.

Tips:

If you want to know the difference between chkdsk /f and /r, refer to this article — CHKDSK /F or /R | Difference Between CHKDSK /F and CHKDSK /R.

Rebuild BCD

If the BCD files in Windows 11/10 are missing or corrupted, the error “it looks like Windows didn’t load correctly” may appear on the screen. To fix it, try to rebuild BCD. In WinRE, go to Troubleshoot > Advanced options > Command Prompt. After opening Command Prompt, type bootrec /rebuildbcd and press Enter.

rebuild BCD

Run Startup Repair

Some users recommend running Startup Repair in Windows Recovery Environment. When seeing the error “Recovery it looks like Windows didn’t load correctly”, click See advanced repair options. Then, go to the Advanced options page and click Startup Repair.

startup repair Windows 10

Perform System Restore

If you have a habit of backup via System Restore, you can use a restore point to revert Windows 11/10 to an earlier state to fix Windows not loading correctly on Dell, Lenovo, etc. PC.

Step 1: Click System Restore in WinRE.

Step 2: You can use the recommended restore point or choose to use a different restore point.

Step 3: Then, click Finish to start the restoration operation.

If there are no restore points created previously, this way cannot fix your issue.

Reset Your PC

If all of the above ways fail to solve your issue, the last resort to remove “it looks like Windows didn’t load correctly” from Windows 10/11 is PC resetting. This operation can help to reinstall your system.

Windows 11 gives you an option to keep your personal files during the resetting process. But if you save some important files on your desktop, we still recommend you to back up them in advance to avoid unexpected data loss.

Back up Data Before You Do

To back up significant files/folders, you can seek help from a piece of professional and free backup software. MiniTool ShadowMaker is worth trying. This backup program allows you to easily create a system image, back up your important data via image backup or sync, and clone a hard drive for disk upgrade/disk backup.

To back up your files when encountering the error “it looks like Windows didn’t load correctly”, it is a bit difficult but you can use MiniTool ShadowMaker to create a bootable USB drive on a working PC and boot the unbootable PC from that drive. Then, back up data with the Bootable Edition of this backup software.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Step 1: Download and install MiniTool ShadowMaker on another PC. Then, launch it to the Tools interface and click Media Builder to create a bootable USB drive.

MiniTool ShadowMaker media builder

Step 2: On your problematic PC, go to BIOS, change the boot sequence to let Windows start up from the bootable drive, and then enter the MiniTool recovery environment.

Step 3: Launch MiniTool ShadowMaker to its Backup page, choose files/folders you want to back up, specify a storage path and click the Back up Now button to execute the data backup.

To know more information about the backup steps, refer to our previous post – How to Back up Data without Booting Windows? Easy Ways Are Here.

Reset Your PC

After finishing the file backup, follow the steps below to reset the PC with the error Windows not loading correctly.

Step 1: Boot your PC to WinRE by restarting the machine several times when seeing the Windows logo.

Step 2: Go to Troubleshoot > Reset this PC.

Step 3: Choose the Keep my files option to continue.

reset this PC

Step 4: Select Cloud download or Local reinstall. If you don’t know which one to choose, refer to this post – Cloud Download vs Local Reinstall: Differences on Win 10/11 Reset.

Step 5: Continue the resetting operation by following the on-screen wizards.

“Get the error ‘Recovery it looks like Windows didn’t load correctly’ in Windows 11/10? After trying these ways, it can be easily removed. You can share these solutions with more persons on Twitter.”Click to Tweet

Recover Data from Your Unbootable PC

Sometimes when encountering the situation – it looks like Windows didn’t load correctly Windows 11/10, you choose to recover data before fixing it to avoid additional trouble. Well then, how to do this task? Data recovery is not easy but things can turn simple if you use professional data recovery software – MiniTool Power Data Recovery.

It enables you to recover files from a variety of situations like an unbootable PC, inaccessible hard drive, formatted/lost/deleted/RAW partition, Windows update, etc. In case of Windows not loading correctly, you can also easily get your data from the hard disk.

Just get a paid edition like Personal Ultimate to create a bootable USB drive by clicking the CD icon and then run the machine from that drive. Launch the bootable edition of this program for data recovery. Just go to the Devices tab and click Scan after hovering your mouse over the system disk. Wait some time until the scan finishes. Then, find what you want to recover, choose them and click Save.

MiniTool Power Data Recovery

Bottom Line

Run your PC but get a blue screen saying “Recovery it looks like Windows didn’t load correctly” in Windows 11/10? To remove this error from your Lenovo or Dell computer, you can try the above solutions collected by us. Just have a shot one by one by following the steps. Of course, if you figure out some other workarounds, welcome to share them with us. Thanks a lot.

It Looks Like Windows Didn’t Load Correctly FAQ

What to do when it says it looks like Windows didn’t load correctly?

There are many solutions you can try:

  1. Enter Safe Mode
  2. Turn off Hybrid Sleep
  3. Run SFC and DISM Scans
  4. Run CHKDSK
  5. Rebuild BCD
  6. Perform Startup Repair
  7. Run System Restore
  8. Reset PC

What causes Windows to not start correctly?

File system corruption, missing/corrupt BCD, compromised system integrity, a buggy driver and software, and more can cause Windows to not load correctly.

Have you gotten the error “it looks like Windows didn’t load correctly” when starting your Windows 10/11 PC? If you are troubled by this issue, this article is what you need. MiniTool Partition Wizard will define this issue and provide several feasible solutions to this issue.

Here is a true example from the Reddit forum:

Today, I tried to turn it on but after going through the Windows logo it went to a black screen. After a few seconds, it shut down and started itself back up and this time went to a blue screen with «it looks like Windows didn’t load correctly» written, with recovery options. I tried to get it to boot a few times but it didn’t work.vhttps://www.reddit.com/r/buildapc/comments/136hgkh/looks_like_windows_didnt_load_correctly_error_is/

What is the “it looks like Windows didn’t load correctly” error? How to fix this error? Please keep reading to know the answers.

It Looks Like Windows Didn’t Load Correctly

Many users reported that they ran into the error “it looks like Windows didn’t load correctly” when trying to boot their PC. Actually, it is a BSOD error. On the screen, it gives you two options: See advanced repair options and Restart my PC. The error screen is shown below:

error message

What are the reasons behind this issue? It is mainly caused by damaged Windows files, missing/corrupt BCD, compromised system integrity, etc. After learning about the reasons behind the “it looks like Windows didn’t load correctly Windows 11” error, you can find out how to fix it.

Because the computer cannot boot successfully, in this case, you should boot the computer into Safe Mode and then perform these actions. For how to start a PC with a blue screen in Safe Mode, the steps are:

  1. Press Win + X and then click Shut down or sign out. Then press Shift and click Restart to enter Windows Recovery Environment (WinRE).
  2. When you are in WinRE, navigate to Troubleshoot > Advanced options > Startup Settings > Restart.
  3. After the computer restarts, there is a list of options. Press the F5 key to choose the Enable Safe Mode with Networking option.

Tips:

For some complex operations on Windows, you should back up your data in advance to avoid data loss, MiniTool Partition Wizard can help you do that easily through its Copy Disk feature. If your computer is unbootable, you should use MiniTool Partition Wizard Bootable. How to create a bootable media, you can refer to solution 7 below.

MiniTool Partition Wizard DemoClick to Download100%Clean & Safe

Copy Disk with MiniTool Partition Wizard

How to Fix It Looks Like Windows Didn’t Load Correctly

Now, try the following solutions one by one to get rid of the “it looks like Windows didn’t load correctly Windows 11/10” issue.

Solution 1: Turn Off Hybrid Sleep

Some users have indicated that the Hybrid Sleep feature may also trigger the “Windows couldn’t load correctly” error. So, when you encounter this error, you can try disabling Hybrid Sleep to fix it.

Step 1: Type control panel into the Search box and choose it to open.

Step 2: In the Control Panel window, set view items with Large icons. Then click on Power Options > Change plan settings.

Step 3: Click on the Change advanced power settings link to open the Advanced setting tab.

Step 4: Expand Sleep > Allow hybrid sleep and then change On to Off.

Step 5: Click on Apply > OK.

turn off Hybrid Sleep

Solution 2: Run DISM and SFC Tools

The “Windows not loading correctly” error may be caused by corrupted system files. You can repair them by running DISM and SFC tools. These two tools should be used in Windows PowerShell or Command Prompt. So, launch PowerShell or Command Prompt first. Here shows how to use DISM and SFC in Command Prompt.

Step 1: Type cmd in the Windows search bar. Then right-click on Command Prompt and select Run as administrator.

Step 2: In the Command Prompt window, type sfc /scannow and press Enter.

Step 3: When the SFC tool completes its task, type DISM.exe /Online /Cleanup-image /Restorehealth and press Enter.

run DISM and SFC tools

Step 4: Wait patiently until the process is 100% complete.

Tips:

If you encounter the SFC not working issue, you can refer to this post: Quick Fix: SFC Scannow Not Working in Windows 10

Solution 3: Check the Hard Drive

Sometimes, the file system is corrupted or there are bad sectors on the hard drive, as a result, “it looks like Windows didn’t load correctly” appears on your Windows 10/11 PC. In this case, it’s important to check if the hard drive gets faulty. There are 2 methods to check the hard disk for errors. For that:

Method 1: Use CHKDSK

CHKDSK is a disk error checking and repair utility built into Windows. It scans hard drive partitions for internal errors and repairs them at the same time. To use CHKDSK to repair a corrupted hard drive partition, follow these steps:

Step 1: Type cmd in the Search box. Then right-click on Command Prompt and select the Run as administrator option to open Command Prompt as administrator. Then click Yes to get Admin access.

Step 2: In the Command Prompt window, type the chkdsk G: /f command and press Enter.

check hard drive errors using CHKDSK

Tips:

“G” represents the hard drive partition letter.

Method 2: Use MiniTool Partition Wizard

Although CHKDSK can be used to check the hard drive for errors, this tool often runs into various issues like CHKDSK being write-protected, CHKDSK getting stuck, etc. So, it’s highly recommended you use a powerful disk manager – MiniTool Partition Wizard. It can help you check bad sectors but also repair file system errors easily and quickly.

MiniTool Partition Wizard FreeClick to Download100%Clean & Safe

Step 1: Launch the MiniTool software to get its main interface, and then select the target drive and click on Check File System from the left action panel.

Step 2: Select Check & fix detected errors and click on the Start button. This tool will check and repair file system errors immediately.

Check File System using MiniTool Partition Wizard

Step 3:In the main interface, select the drive again and click on Surface Test from the left pane.

Step 4:Click on the Start Now button in the pop-up window. After that, this tool will scan the whole drive immediately and show you the test result.

Surface Test using MiniTool Partition Wizard

Step 5: When the hard drive error test process is completed, the bad sectors on the hard drive will be marked with red color. In this case, you can either use this bad sector repair guide or consider replacing it with a new one.

Solution 4: Rebuild BCD

BCD (Boot Configuration Data) is the most important Windows component to start or boot your computer. If the BCD is missing or corrupted, Windows couldn’t load correctly. Therefore, you can rebuild BCD to fix the error.

Step 1: When seeing the error “it looks like Windows didn’t load correctly”, click on See advanced repair options, and then select Command Prompt.

Step 2: In the Command Prompt window, type the following commands in order and press Enter after each one.

  • bootrec /fixmbr
  • bootrec /fixboot
  • bootrec /scanos
  • bootrec /rebuildbcd

rebuild BCD

Solution 5: Run Startup Repair

You can also try to run Start Repair to fix the “it looks like Windows didn’t load correctly” error and see if that works for you. When you see the error screen, click on the See advanced repair options button. Then, go to the Advanced options page and select Startup Repair. Then follow the on-screen instructions to complete the repair.

run Startup Repair

Solution 6: Perform System Restore

If you created a Windows restore point before the Windows not loading correctly error occurred, you can perform a system restore to take care of the issue.

Step 1: Go to the Advanced options page like the steps mentioned above. Then click on System Restore.

Step 2: Select your user account and enter a password.

Step 3: Select the system restore point created earlier, then follow the prompts and wait for the process to complete.

Solution 7: Reset or Reinstall Windows

If the above methods can’t solve the “it looks like Windows didn’t load correctly” error, you can try to clean reinstallation Windows to solve it. Some users report that they have solved this error through this method. But pay attention that you need to recover the lost data or back up them before you do.

Facing the situation that Windows cannot boot normally, you should take advantage of the third-party software called MiniTool Partition Wizard which can help you recover data before resetting or reinstalling Windows. Since Windows cannot boot normally, you should create a bootable media in advance, and then recover data.

MiniTool Partition Wizard DemoClick to Download100%Clean & Safe

Here is a tutorial on how to recover data with the help of MiniTool Partition Wizard.

Step 1: Plug the prepared USB into the working computer or insert the prepared CD/DVD into its CD/DVD burner.

Step 2: Download the software and then launch it to access its main interface. Click Bootable Media in the upper right corner and follow the on-screen instructions to create a bootable USB, CD, or DVD.

click on Bootable Media

Step 3: Plug the bootable USB into the original computer which the operating system cannot boot or put the bootable CD or DVD into it.

Step 4: Restart the computer and press F2 or another key to enter BIOS menu. Change boot settings to make your computer boot from the USB or CD/DVD flash drive.

Step 5: In the main interface of MiniTool Partition Wizard, click on Data Recovery from the top toolbar.

click on Data Recovery

Step 6: Click on the Scan button under the partition you need to recover the data.

data recovery

Step 7: Then wait for the scan to complete. Once the scan is complete, check all items that you need to recover and click on Save.

click on Save

Step 8: In the pop-up window, select a directory to save the selected files and click on OK.

Note:

You’d better save the recovered files to another drive. Otherwise, the lost/deleted data could be overwritten.

save the recovered files

After recovering and backing up data, you can reset or reinstall your operating system.

For resetting Windows, please carry out the following operations in order.

  • Boot your PC to WinRE;
  • Go to Troubleshoot > Reset this PC.

For reinstalling Windows, please click here.

Are you bothered by the “it looks like Windows didn’t load correctly” error when booting your PC? This post provides several feasible solutions to this issue. Just have a try!Click to Tweet

Bottom Line

All 7 solutions have been displayed in the above content. Have you solved the error successfully with the 7 solutions? Hope this article can help you solve the “it looks like Windows didn’t load correctly” error. If you run into some problems during the fixing process, you can leave them in the following comment zone.

Certainly, if you have any questions about or suggestions for MiniTool Partition Wizard, please do not hesitate to contact us via [email protected].

Quick Access to Fix It Looks Like Windows Didn’t Load Correctly

To fix this error — it looks like windows didn’t load correctly, you can choose to restore your PC to an earlier point, only accepting the fact that some downloaded files and applications, plus personal files you saved in the system partition will be missing. The easiest way to fix the error is to watch the video and fix Windows didn’t load correctly in three ways. 

  1. 1 — Fix MBR and System File
  2. 2 — Fix BCD Error
  3. 3 — Uninstall Software or Driver in Safe Mode

If you prefer a step-by-step guide, you can read the fixes below to get more help.

Workable Solutions Step-by-step Troubleshooting
Fix 1. Restore Data to Another Drive Make sure that all hard drives and other devices were correctly connected and recognized…Full steps
Fix 2. Boot into Safe Mode Connect the Windows Installation Media to the computer. Choose to boot from…Full steps
Fix 3. Run CHKDSK Insert Windows 10/8/7 installation disk or installation USB into PC > boot from the disk or USB…Full steps
Fix 4. Rebuild BCD Insert Windows installation disk > boot from the disk or USB. Click «Repair your computer»…Full steps
Fix 5. Perform System Restore Choose «Advanced options» on the blue screen and then navigate to «Troubleshoot»…Full steps

It Looks Like Windows Didn’t Load Correctly

«Automatic Repair 

Windows couldn’t load correctly 

System Restore can try to restore your PC to an earlier point in time when it worked correctly. This repair will not change personal data, but it might remove some apps that were installed recently. You cannot undo this process. 

Restore | Cancel»

it looks like Windows didn't load correctly

This is a Windows Automatic Repair topic called Windows couldn’t load correctly, or perhaps you received the variants, such as Windows couldn’t start correctly, your PC did not start correctly or Windows couldn’t restart correctly. Each specific error has detailed supplementary information behind, telling you what you should do next. Before you are going to fix this error, you must learn about the causes.

What Causes Your PC Did Not Start Correctly

Windows didn’t load correctly error is often caused by these reasons:

1 — BCD is missing or corrupt

BCD became missing or corrupt. This could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually.

2 — File system integrity compromised

The file system itself may become corrupt or damaged. 

3 — System files are damaged

The system files may also become damaged.

After you have learned about the reasons, you can fix Windows couldn’t load correctly error accordingly. To solve your problem, I have gathered 5 effective solutions to fix Windows couldn’t load correctly in Windows 10/8.1/8/7.

  1. Fix 1. Restore Data to Another Drive
  2. Fix 2. Boot into Safe Mode
  3. Fix 3. Run CHKDSK
  4. Fix 4. Rebuild BCD
  5. Fix 5. Perform System Restore

Fix 1. Restore Data to Another Drive to Avoid Data Loss

Before you are going to fix Windows couldn’t load correctly error, you must export or restore your data to avoid additional trouble. Since your PC cannot load and boot, you need to create a bootable disk to enter your PC. You can run EaseUS Data Recovery Wizard WinPE Edition. With it, you can restore data to another drive even you can’t boot into Windows. Besides, this data recovery software has many highlights:

  • Recover data from dead hard drive
  • Restore data from corrupted Windows 10/8/7
  • Retrieve photos, videos, documents, and emails

Step 1. Run EaseUS Data Recovery Wizard. Choose the drive where you lost files and start scanning. This software allows you to recover lost data from all devices, including HDD, SSD, USB drive, SD card, pen drive, camera, etc.

select a location to scan

Step 2. Browse the full scan results. You can choose the file type you need by clicking on the file type filter. EaseUS data recovery software supports 1000+ file types like photos, videos, documents, emails, audio files, and many more. 

Choose files to recover

Step 3. Select the files you want to preview. Click «Recover» and set a storage location to save the recovered data. 

Recover lost data

Fix 2. Boot into Safe Mode to Fix Windows Not Loading Correctly

Safe Mode is a diagnostic mode of Windows. It is the safest and most promising option when it comes to troubleshooting your pc. Since you cannot boot into Windows when you are faced with Windows didn’t load correctly error, you need a Windows installation CD/DVD for the following methods. If you don’t have the installation disc, follow the guide from Microsoft to create a Windows Installation Media. Then enter Safe Mode:

Step 1. Connect the Windows Installation Media to the computer.

Step 2. Choose to boot from the installation media from the screen.

Step 3. Wait for the files to be loaded.

Step 4. In the Windows Setup window, choose «Next».

Step 5. Again, in the Windows Setup window, choose «Repair your computer» > «Troubleshoot» > «Advanced options» > «Startup Settings».

Step 6. Choose a Safe Mode option (Safe Mode, Safe Mode with Networking, and Safe Mode with Command Prompt) to enter.

fix Windows couldn't load correctly by booting into safe mode

You can uninstall suspicious software or drivers in Safe Mode.

Fix 3. Run CHKDSK to Fix Windows 10 Didn’t Load Correctly

Since you can boot correctly, you need to create a Windows 10/8/7 installation disk. Then, follow the steps below:

Step 1. Insert Windows 10/8/7 installation disk or installation USB into PC > boot from the disk or USB.

Step 2. Click «Repair your computer» or hit F8 at the install now screen.

Step 3. Click «Troubleshoot» > «Advanced options» > «Command Prompt».

Step 4. Type chkdsk E: /f /r /x, and press «enter».

«E» means the drive letter of the partition you want to repair.

run chkdsk to fix Windows didn't load correctly

Fix 4. Rebuild BCD If Windows Couldn’t Load Correctly

If BCD became missing or corrupt, Windows 10/8/7 cannot load correctly. Thus, you can rebuild BCD to fix the error. You also need a Windows installation disc.

Step 1. Insert Windows 10/8/7 installation disk or installation USB into PC > boot from the disk or USB.

Step 2. Click «Repair your computer» or hit F8 at the install now screen.

Step 3. Click «Troubleshoot» > «Advanced options» > «Command Prompt».

Step 4. Type each command line and hit Enter each time:

ren BCD BCD.old

bcdboot C:\Windows /1 en-us /s G: /f ALL (Note: c:\ is the drive where Windows 10/8.1/8 is installed on.)

rebuild bcd to fix Windows 10 didn't load correctly

Step 5. Type exit in Command Prompt when the process completes and then restart your PC.

Fix 5. Perform System Restore If Windows Still Cannot Load

If you have created a Windows restore point before the Windows not loading error occurs, you can perform a system restore to deal with the issue.

Step 1. Choose «Advanced options» on the blue screen and then navigate to «Troubleshoot» > «Advanced Options» > «System Restore». 

Step 2. Choose a restore point to restore your computer to the state.

Step 3. Wait until the restore process finishes and then restart your computer.

perform system restore

If you don’t have a system image, you can install Windows 10/8/7 from USB by yourself.

Conclusion

How to fix if it looks like Windows didn’t load correctly error? If you are wondering then you are in the right place. Here you will find out how to fix this issue with five useful solutions. If you have extra tips, you can contact us and share your solutions.

Windows Couldn’t Load Correctly FAQs

If you still have problems, read on to these related questions. You can get additional help about Windows boot problems.

How do I fix it looks like windows didn’t load correctly?

You can fix Windows 10 didn’t load correctly with these solutions:

  • Restore Data to Another Drive
  • Boot into Safe Mode
  • Run CHKDSK
  • Rebuild BCD
  • Perform System Restore

What causes your PC did not start correctly?

As mentioned above, the Windows did not start correctly issue can be caused by a third-party program or a recent hardware change on your system, a BCD error, or a file system error.

Why Windows 10 is not working properly?

In some cases, third-party anti-virus and anti-malware software can disrupt certain Windows programs. 

How do I fix Windows startup problems?

You can fix it by uninstalling new software or drivers:

  • Insert the Windows bootable drive and boot from it.
  • Select your language preferences, and click Next.
  • Click Repair your computer.
  • Select Troubleshoot > Startup Settings > Restart.
  • Press the F4 key to boot Windows into Safe Mode.
  • Then, you can uninstall new software or drivers.

Windows 10 запущена некорректноВ этой инструкции пошагово будут описаны способы исправить проблему, когда при загрузке Windows 10 на экране «Автоматическое восстановление», вы видите сообщение о том, что компьютер запущен некорректно или что система Windows загрузилась неправильно. Также поговорим и о возможных причинах такой ошибки. Если перед появлением сообщения появлялась информация о том, что на вашем ПК возникла проблема и коде остановки 0xc000021a, об этом здесь: Как исправить ошибку 0xc000021a при загрузке Windows 10.

Прежде всего, если ошибка «Компьютер запущен некорректно» возникает у вас после выключения компьютера или после прерывания обновления Windows 10, но успешно исправляется нажатием кнопки «Перезагрузить», а потом появляется снова, или же в тех случаях, когда компьютер включается не с первого раза, после чего происходит автоматическое восстановление (и опять же все исправляется путем перезагрузки), то все нижеописанные действия с командной строкой — не для вашей ситуации, в вашем случае причины могут быть следующими. Дополнительная инструкция с вариантами проблем запуска системы и их решениями: Не запускается Windows 10.

Первая и распространенная — проблемы с питанием (если компьютер включается не с первого раза, вероятно, неисправен блок питания). После двух неуспешных попыток запуска Windows 10 автоматически запускает восстановление системы. Второй вариант — проблема с выключением компьютера и режимом быстрой загрузки. Попробуйте выключить быстрый запуск Windows 10. Третий вариант — что-то не так с драйверами. Замечено, например, что откат драйвера Intel Management Engine Interface на ноутбуках с Intel на более старую версию (с сайта производителя ноутбука, а не из центра обновлений Windows 10) может решать проблемы с выключением и сном. Также можно попробовать проверку и исправление целостности системных файлов Windows 10.

Если ошибка появляется после сброса Windows 10 или обновления

Один из простых вариантов появления ошибки «Компьютер запущен некорректно» является примерно следующий: после сброса или обновления Windows 10 появляется «синий экран» с ошибкой наподобие INACCESSIBLE_BOOT_DEVICE (хотя эта ошибка может быть индикатором и более серьезных проблем, в случае с ее появлением после сброса или отката обычно все просто), а после сбора информации появляется окно «Восстановление» с кнопкой «Дополнительные параметры» и перезагрузка. Хотя, этот же вариант можно опробовать и в других сценариях появления ошибки, способ безопасен.

Зайдите в «Дополнительные параметры» — «Поиск и устранение неисправностей» — «Дополнительные параметры» — «Параметры загрузки». И нажмите кнопку «Перезагрузить».

Параметры загрузки при восстановлении Windows 10

В окне «Параметры загрузки» нажмите клавишу 6 или F6 на клавиатуре для запуска безопасного режима с поддержкой командной строки. Если он запустится, войдите под администратором (а если нет, то этот способ вам не подходит).

Запуск безопасного режима с поддержкой командной строки

В открывшейся командной строке используйте по порядку следующие команды (первые две могут показывать сообщения об ошибках или долго выполняться, «зависая» в процессе. Ожидайте.)

  1. sfc /scannow
  2. dism /Online /Cleanup-Image /RestoreHealth
  3. shutdown -r

И дождитесь, когда компьютер будет перезапущен. Во многих случаях (применительно к появлению проблемы после сброса или обновления) это позволяет исправить проблему, восстановив запуск Windows 10.

«Компьютер запущен некорректно» или «Кажется, система Windows загрузилась неправильно»

Если после включения компьютера или ноутбука вы видите сообщение о том, что идет диагностика компьютера, а после этого — синий экран с сообщением о том, что «Компьютер запущен некорректно» с предложением перезагрузить или зайти в дополнительные параметры (второй вариант того же сообщения — на экране «Восстановление» сообщение о том, что система Windows загрузилась неправильно), это обычно говорит о повреждении каких-либо системных файлов Windows 10: файлов реестра и не только.

Система Windows загрузилась неправильно

Проблема может проявляться после внезапного выключения при установке обновлений, установки антивируса или очистки компьютера от вирусов, очистки реестра с помощью программ-клинеров, установки сомнительных программ.

ошибка Компьютер запущен некорректно

А теперь о способах решения проблемы «Компьютер запущен некорректно». Если так сложилось, что у вас в Windows 10 было включено автоматическое создание точек восстановления, то прежде всего стоит попробовать именно этот вариант. Сделать это можно следующим образом:

  1. Нажмите «Дополнительные параметры» (или «Дополнительные варианты восстановления») — «Поиск и устранение неисправностей» — «Дополнительные параметры» — «Восстановление системы». Использование точек восстановления в среде восстановления
  2. В открывшемся мастере восстановления системы нажмите «Далее» и, если он найдет доступную точку восстановления, используйте её, с большой вероятностью, это решит проблему. Если нет, нажимаем «Отмена», а в будущем, вероятно, имеет смысл включить автоматическое создание точек восстановления.Доступные точки восстановления Windows 10

После нажатия кнопки отмена, вы снова попадете на синий экран. Нажмите на нем «Поиск и устранение неисправностей».

Теперь, если вы не готовы предпринимать все следующие шаги по восстановлению запуска, в которых будет использоваться исключительно командная строка, нажмите «Вернуть компьютер в исходное состояние» для сброса Windows 10 (переустановки), которую можно осуществить и с сохранением ваших файлов (но не программ). Если готовы и хотите попробовать вернуть все как было — нажмите «Дополнительные параметры», а затем — «Командная строка».

Внимание: шаги, описанные далее, могут не исправить, а усугубить проблему с запуском. Беритесь за них только лишь в случае готовности к этому.

В командной строке мы по порядку проверим целостность системных файлов и компонентов Windows 10, попробуем исправить их, а также произведем восстановление реестра из резервной копии. Все это в совокупности помогает в большинстве случаев. По порядку используйте следующие команды:

  1. diskpart
  2. list volume — после выполнения этой команды вы увидите список разделов (томов) на диске. Вам нужно определить и запомнить букву системного раздела с Windows (в столбце «Имя», она, скорее всего, будет не C: как обычно, в моем случае это — E, дальше буду использовать ее, а вы — свой вариант). Определение системного раздела с Windows
  3. exit
  4. sfc /scannow /offbootdir=E:\ /offwindir=E:\Windows — проверка целостности системных файлов (здесь E: — диск с Windows. Команда может сообщить о том, что Защита ресурсов Windows не может выполнить запрошенную операцию, просто выполняем следующие шаги).
  5. E: — (в этой команде — буква системного диска из п. 2, двоеточие, Enter).
  6. md configbackup
  7. cd E:\Windows\System32\config\
  8. copy * e:\configbackup\
  9. cd E:\Windows\System32\config\regback\
  10. copy * e:\windows\system32\config\ — на запрос о замене файлов при выполнении этой команды, нажмите клавишу с латинской A и нажмите Enter. Этим мы производим восстановление реестра из резервной копии, автоматически создаваемой Windows. Восстановление реестра Windows 10
  11. Закройте командную строку и на экране «Выбор действия» нажмите «Продолжить. Выход и использование Windows 10».

Есть немалая вероятность, что после этого Windows 10 запустится.  Если нет, вы можете отменить все сделанные изменения в командной строке (запустить которую можно так же, как и раньше или с диска восстановления), вернув файлы из созданной нами резервной копии:

  1. cd e:\configbackup\
  2. copy * e:\windows\system32\config\ (подтвердить перезапись файлов, нажав A и Enter).

Если же ничто из описанного не помогло, то могу рекомендовать лишь сброс Windows 10 через «Вернуть компьютер в исходное состояние» в меню «Поиск и устранение неисправностей». Если после указанных действий попасть в это меню не получается, используйте диск восстановления или загрузочную флешку Windows 10, созданную на другом компьютере, чтобы попасть в среду восстановления. Подробнее в статье Восстановление Windows 10.

  • It is required that your private key files are not accessible by others windows
  • It is recommended that you play this title in windows 7 compatibility mode
  • It is getting a bit cold i the windows
  • Isunshare windows password genius standard
  • Ista bmw скачать на русском для windows 7