Intel wifi 6 ax201 160mhz драйвер для windows 11

Download the latest Intel Wi-Fi driver version 22.230.0 released for Intel’s wireless hardware. This release includes functional updates, but more importantly, it addresses a few operation issues which have been discussed in detail below.

If you have the supported hardware, download and install the latest Intel Wi-Fi driver using the direct download link provided below.

Note: The 32-bit Windows is still on Wi-Fi driver version 22.160.0.

Download Intel Wi-Fi driver v22.230.0

For Windows 11, 10 (x64)

Download Intel Wi-Fi Driver v22.230.0 for Windows 11, 10 (x64) [40.2 MB]

For Windows 10 (x86)

Download Intel Wi-Fi Driver v22.160.0 for Windows 10 (x86) [8.5 MB]

What’s new in Intel wireless driver 22.230.0

The following fixes and improvements have been made in the Intel Wi-Fi driver version 22.230.0:

• Channel allocation alignment is done to IEEE 6E standard. Japan 6E TX power alignment.

• Rarely, after connecting to a wireless network, turning off the Wi-Fi switch, putting the computer into sleep mode, then waking it up again, the wireless 6E-capable adapter might show a yellow bang in the Device Manager. This issue is now resolved.

• The issue of some computers failing to connect to certain Access Points (APs) is fixed.

• The issue of Wi-Fi not being able to search 5 GHz AP Service Set Identifier (SSID) when using 2.4 GHz frequency during Wireless Display (WiDi) screen casting is fixed.

• This release includes functional updates.

Intel Wi-Fi driver 22.230.0 supported hardware

Here is a list of the supported Wi-Fi hardware compatible with this driver:

• Intel Wi-Fi 6E AX411 (Gig+)
• Intel Wi-Fi 6E AX211 (Gig+)
• Intel Wi-Fi 6E AX210 (Gig+)
• Intel Wi-Fi 6 AX203
• Intel Wi-Fi 6 AX201
• Intel Wi-Fi 6 AX200
• Intel Wi-Fi 6 AX101
• Intel Wireless-AC 9560
• Intel Wireless-AC 9461/ 9462
• Intel Wireless-AC 9260

To learn more about the Wi-Fi driver version 22.230.0, read the Release Notes.

How to install Intel Wi-Fi drivers

Once you have downloaded the respective driver(s), the process to install it is simple. Here are the steps to install an Intel wireless driver:

1. Run the downloaded setup file by double-clicking it.

   The installation wizard will launch.

2. Click Next.

   

3. Agree to the End User License Agreement by checking the box below and then click Install.

   

   The driver will then begin installation and the process should not take more than more than a minute.

4. When done, click Finish.

   

The driver will now be successfully installed, automatically replacing the older version.

Roll Back Driver

If a driver has been updated, Windows still keeps the previous version of the driver just in case. This will be made available in case you decide to roll back to it at a later time.

You may need to go back to the previous version of the driver if you find that the newer one is having issues, or is just not compatible with your setup.

That said, Windows only keeps the last installed version of the driver and discards the rest. You can roll back to the latest version using these steps:

1. Press Windows Key + R keys simultaneously to open the Run Command box.

2. Type in “devmgmt.msc” and press Enter to open the Device Management console.

   

3. Expand the branch of the hardware whose driver you want to roll back.

   

4. Right-click on the device and then click Properties from the context menu.

   

5. Switch to the Driver tab and click Roll Back Driver.

   

6. From the pop-up window, select the reason for rolling back and then click Yes.

   

The window will now close. Give your system a few seconds for the driver to successfully rollback.

Note that you will not be prompted whether the driver has rolled back or not. You can confirm this by checking that the “Roll Back Driver” button has been greyed out in the device’s Properties window. If it has, it means that the rollback was successful.

Proceed to close the Properties window and the Device Management console.

Conclusion

The purpose of the driver is to make the communication between the hardware and software seamless. Therefore, it is always recommended that you install the latest driver available, which includes security patches, bug fixes, and other improvements.

Download the latest Intel wireless Wi-Fi driver today using the direct download link from Intel.

From the Wi-Fi release 22.170.X package onwards, the Windows 10 32-bit driver for products 7265(Rev. D),3165 and 3168 will only receive updates to address potential security vulnerabilities.

From the Wi-Fi release 22.100.X package onwards, there will be one INF file as part of the installation package that will support all Intel Wi-Fi 6E adapters. The INF file (Netwtw06e.INF) will provide installation support for current and newer Wi-Fi 6E adapters. Additional Information available here.

Purpose

The 22.200.0 package installs the Windows 10 and Windows 11* Wi-Fi drivers for the following Intel Wireless Adapters:

• Windows 10 64-bit and Windows 11*
  • 22.200.0.6 for AX411, AX211, AX210, AX203, AX201, AX200, AX101, 9560, 9462, 9461, 9260
  • 20.70.32.1 for 8265, 8260
  • 19.51.42.2 for 7265(Rev. D), 3168, 3165
• Windows 10 32-bit
  • 19.51.40.1 for 7265(Rev. D), 3168, 3165

Notes

Drivers for certain Intel Wireless Adapters may not have been updated and are the same as the previous package. You do not need to install this package if the version of the driver is the same.

• WiFi-22.200.0-Driver64-Win10-Win11.exe for 64-bit of Windows 10 and Windows 11*
• WiFi-22.160.0-Driver32-Win10.exe for 32-bit of Windows 10

Note: Windows* 11 is only supported in 64-bit.

Note: This software release version does not include new drivers for the Intel Wireless 7265 Family (Rev.C), Intel Dual Band Wireless-AC 3160 and Intel Wireless 7260 Family adapters. Please refer to the following link for latest available drivers here.

What’s New:

• Regulatory adjustments for: Chile, China
• In Advanced settings, adding option 5&6GHz in preferred band.
• Bluetooth/Wi-Fi coexistence improvements for 11n on some systems.
• Some 5GHz channels in China may not be available in P2P GO or SoftAP scenario.
• This software release version 22.200.0 has been updated to include functional and security updates.
• There may be other minor issues addressed which will impact performance, stability, or vendor specific functionality not listed above. Users should update to the latest version.

Supported Products:

• Intel Wi-Fi 6 (Gig+) Desktop Kit AX210, AX201, AX200
• Intel Dual Band Wireless-AC 9260 Embedded IoT Kit
• Intel Tri-Band Wireless-AC 18260
• Intel Wireless-AC 9260
• Intel Wireless-N 7265
• Intel Dual Band Wireless-N 7265
• Intel Dual Band Wireless-AC 3165
• Intel Dual Band Wireless-AC 3168
• Intel Dual Band Wireless-AC 7265
• Intel Dual Band Wireless-AC 8260
• Intel Dual Band Wireless-AC 8265
• Intel Dual Band Wireless-AC 8265 Desktop Kit
• Intel Dual Band Wireless-N 7265
• Intel Wi-Fi 6 (Gig+) Desktop Kit
• Intel Wi-Fi 6 AX200 (Gig+)
• Intel Wi-Fi 6 AX201 (Gig+)
• Intel Wireless-AC 9260
• Intel Wireless-AC 9461
• Intel Wireless-AC 9462
• Intel Wireless-AC 9560
• Intel Wireless-N 7265

How to Update an Intel Wi-Fi 6 AX201 160MHz Driver?

If you’ve recently purchased a Surface device, it may be relying on an Intel Wi-Fi 6 AX201 160MHz adapter that is not functioning properly. If this happens, you’ll want to update the driver manually. If this doesn’t fix the issue, try resetting your network settings or reinstalling the adapter. So, you can download the latest version of Intel Wifi 6 AX201 160mhz Driver on Windows all versions.

Fixing a dual-band Wi-Fi 6 AX201 160mhz adapter not working:

If you are experiencing issues with your Intel Wi-Fi 6 AX201 160MHz adapter, you may need to update the drivers for your device. These can be found in Control Panel. To update a driver, right-click on the device and choose Update Driver. After updating the driver, restart your PC to test whether the problem has been resolved.

If this does not fix the issue, you might be able to download a new driver for your Intel Wi-Fi 6 AX201 160MHz adapter. You can find the latest drivers for your adapter on the Intel website. Another option is to download and install the Intel Driver & Support Assistant. This software automatically updates drivers for your Intel hardware and keeps your computer updated.

If this does not solve the problem, you can try changing the wireless settings on your laptop or desktop. This is an easy and quick way to fix the issue. You can also try changing the driver settings on your router.

Manually updating the adapter’s driver:

Manually updating the adapter’s driver is a simple process that can be done in two ways. The first option involves downloading the correct driver from the manufacturer. However, if you do not have access to the internet, you can download the required driver to your usb flash drive and then manually install it on your computer.

You can also find the latest driver for your adapter by visiting the manufacturer’s website. You can use the search bar or double-click on the category and then select “Device Manager.” You will need to locate the latest driver for your network adapter. Click on the Update button, which will download the new driver to your computer.

The next option is to download the Network Adapter Intel Wifi 6 AX201 160mhz Driver from the manufacturer’s website. Several network card manufacturers such as Realtek, TP-Link, and Linksys have websites dedicated to network cards. Visit these websites and type in the manufacturer’s model number to find the appropriate driver. Once you find the correct driver, double-click it and follow the wizard to install it.

Resetting network settings:

If you’re experiencing internet connection problems, one of the most simple fixes is resetting the network settings. This will clear any saved Wi-Fi connections, Bluetooth pairings, mobile network preferences, and VPN information. To perform this task, press Windows + I and then select the Network and Internet section. From here, you can click the Reset now button. Wait for the network to be reset, and then try connecting again.

In the Network and Internet section, locate the Network Troubleshooter. Select the “Connection” tab and click “Restart Now.” After the Network Troubleshooter has finished troubleshooting, click “Restart Now” to get back online. If the problem persists, run the Network Troubleshooter again.

Another simple solution is to run Windows Update. This is located on the left navigation panel. Click “Check for updates” to see if there are any updates available for your computer. You can also set a schedule to download the updates automatically. After installing the updates, restart your computer and check if your Intel Wi-Fi 6 AX201 driver is working again.

Reinstalling the adapter:

If you have problems using your Intel Wi-Fi 6 AX201 160MHz adapter, you may need to update the driver. You can download and install the latest drivers from the manufacturer’s website. If the driver is still not working, you can uninstall it. To do this, open Device Manager. Select the Network adapters tab.

Once you have uninstalled the old driver, try to install the updated one. The driver is several hundred MB in size, so you may have to wait a while for it to download. After the update is completed, restart your computer and check if your Wi-Fi connection is working properly.

If you are still unable to connect to the internet, you can use the Network troubleshooter to fix the problem. This tool automatically detects and repairs network problems, so it can be helpful in troubleshooting a problem. If the problem persists, you can try running the Network troubleshooter manually from the manufacturer’s website. However, be sure to have enough time and product knowledge to successfully complete the procedure.