Intel gma 3650 driver windows 10

Downloaded: 38,933 times
Last Time: 07 October 2023

Option 1: Update Intel gma 3650 driver windows 10 with the Device Manager

The Device Manager software displays all of your system’s connected devices. This Windows integrated utility makes it simple to manage your devices. As a result, when you connect the printer to your PC, you may use Device Manager to download and update the Intel gma 3650 driver windows 10 driver download and update. To learn more about the same, follow the guidelines:

So that was the manual technique for getting Intel gma 3650 driver windows 10 software for free and updating it. Check out the following solution if you want an automatic way (because this one is a little complicated).

Option 2: Automatically Download Intel gma 3650 driver windows 10 With Iobit Driver Updater (Prefered)

As you may have noticed, the prior process for downloading and updating Intel gma 3650 driver windows 10 was a little convoluted. Furthermore, due to technological issues, the procedure may not even operate at times. As a result, we’ve outlined the most effective way to obtain driver updates for Intel gma 3650 driver windows 10 and other devices.

For your convenience, we recommend that you use the Iobit Driver Updater. The Quick Driver Updater, as its name implies, provides quick driver updates for a variety of devices. Furthermore, the program provides you with so many other advantages that you will never have a difficulty using the drivers. All of your driver needs are taken care of by the tool, including updates, backups, restores, update schedules, rapid updates, safe updates, and so on.

All of this is available with a single tool for PCs running Windows 11, 10, 8, 7, or earlier versions of Windows. You might wonder what the tool’s best feature is. The best feature, in our opinion, is single-click updates. This allows both novices and pros to apply updates without difficulty.

More drivers for Intel gma 3650 driver windows 10

intel-centrino-advanced-n-6205-driver-debian intel-celeron-3205u-graphics-driver intel-z68-chipset-driver intel-dh55hc-pci-serial-port-driver intel-8-series-c220-usb-ehci-driver dell-optiplex-intel-hd-graphics-4000-windows-10-driver intel-5-series-ahci-driver-windows-10 intel-b960-processor-driver-download intel-g4-express-chipset-driver intel-8-series-ahci-driver intel-driver-update-software how-to-uninstall-intel-graphics-driver-in-windows-7 intel-dual-band-wireless-n-7260-driver-update intel-iris-pro-580-driver acer-aspire-one-intel-graphics-driver download-driver-sata-intel-windows-7

Intel(R) Graphics Media Accelerator 3600 Series Drivers: A Comprehensive Guide

The Intel(R) Graphics Media Accelerator 3600 Series drivers are software programs that enable communication between the operating system on your computer and devices. These drivers play a crucial role in ensuring optimal performance and stability of your PC.

Installing the Intel(R) Graphics Media Accelerator 3600 Series Drivers

To install the Intel(R) Graphics Media Accelerator 3600 Series drivers, follow these steps:

• Visit the official website of the developer and navigate to the Drivers section.
• Use the search bar or select your device model from the list.
• Choose your operating system and click on «Search.»
• Click on the «Download» button next to the latest version of the drivers compatible with your system.
• Once downloaded, double-click on the installer file and follow the on-screen instructions to complete the installation process.

Updating the Intel(R) Graphics Media Accelerator 3600 Series Drivers

To update the Intel(R) Graphics Media Accelerator 3600 Series drivers, you can follow these steps:

• Open the Device Manager on your computer.
• Expand the category and locate your Intel(R) Graphics Media Accelerator 3600 Series driver.
• Right-click on the driver and select «Update Driver.»
• Choose the option to search for updated driver software automatically.
• If an update is available, follow the prompts to download and install it.

Reinstalling the Intel(R) Graphics Media Accelerator 3600 Series Drivers

If you need to reinstall the Intel(R) Graphics Media Accelerator 3600 Series drivers for any reason, here’s what you can do:

• Open the Device Manager on your computer.
• Expand the necessary category and locate your Intel(R) Graphics Media Accelerator 3600 Series driver.
• Right-click on the driver and select «Uninstall device.»
• Follow the prompts to complete the uninstallation process.
• Visit the official developer website and download the latest version of the driver for your needs.
• Run the installer and follow the instructions to complete the installation process.

Rolling Back or Downgrading the Intel(R) Graphics Media Accelerator 3600 Series Drivers

If you encounter any issues with the latest version of the Intel(R) Graphics Media Accelerator 3600 Series drivers, you can roll back or downgrade to a previous version by following these steps:

• Open the Device Manager on your computer.
• Expand the necessary category and locate your Intel(R) Graphics Media Accelerator 3600 Series driver.
• Right-click on the driver and select «Properties.»
• Go to the «Driver» tab and click on «Roll Back Driver.»
• Follow the prompts to complete the process.

Rolling Back or Downgrading the Intel(R) Graphics Media Accelerator 3600 Series Drivers

If you encounter any issues with the latest version of the Intel(R) Graphics Media Accelerator 3600 Series drivers, you can roll back or downgrade to a previous version by following these steps:

• Open the Device Manager on your computer.
• Expand the necessary category and locate your Intel(R) Graphics Media Accelerator 3600 Series driver.
• Right-click on the driver and select «Properties.»
• Go to the «Driver» tab and click on «Roll Back Driver.»
• Follow the prompts to complete the process.

Uninstalling the Intel(R) Graphics Media Accelerator 3600 Series Drivers

If you need to uninstall the Intel(R) Graphics Media Accelerator 3600 Series drivers completely, here’s what you can do:

• Open the Device Manager on your computer.
• Expand the necessary category and locate your Intel(R) Graphics Media Accelerator 3600 Series driver.
• Right-click on the driver and select «Uninstall device.»
• Follow the prompts to complete the uninstallation process.
• Restart your computer.

It is essential always to have the latest version of the Intel(R) Graphics Media Accelerator 3600 Series drivers installed for optimal performance and stability.

So of late I’ve been getting some hits with the Intel GMA 3600 and I know exactly why. Some months ago I wrote a post on how to fix the low resolution of the chip on Linux systems, and to be specific, on Arch-based distros. On that post I didn’t touch on Windows because I was fully aware the problem was much complicated on that end. Here’s why:

The chip was designed for the Windows 7 system, and particularly the 32-bit variant, though the atom chip it’s paired with is 64-bit capable. Contrary to expectations, that is as you would have with other similar graphic chips, this one became quite problematic in running anything else other than Windows 7.

With Linux it was expected but when it showed issues with Windows 8/8.1 I wasted no time getting back to Windows 7. The new UI was enough of a reason to downgrade then. Flash forward to 2015 and Microsoft is all up on our desktop’s paining us to upgrade to their new OS – Windows 10.

Knowing very well the problems I had faced with Windows 8.1 I decided not to take up the offer. It’s been over a year now and thanks to those queries I’ve decided to revisit that decision. As it turns out I wasn’t mistaken.

After loading Windows 10 on my Samsung netbook as I expected it defaulted to the Microsoft Basic driver which meant it had to run with a resolution of 800×600 and of course with no brightness control.

So the next thing I did was use the good old device manager to install the last updated Windows 7 driver from Intel (who by the way we have to thank for all this mess on account of them dropping support for this driver).

The driver installation went smoothly but after the restart came the issues: blank screen followed by BSOD. The error message: VIDEO_TDR_FAILURE. The same exact error witnessed on Windows 8.1 if I’m not mistaken.

After that I didn’t even want to waste my time troubleshooting, but seeing I had nothing to lose, well apart from my time, I decided to tinker around with it using some solutions being offered online. And talking about online, I have to say this issue is troubling quite a good number of us. But going with the response, it’s easy to conclude that we mean very little to both Intel and Microsoft.

The first solution which I came across was to remove the SystemApps and WindowsApp from the system then reinstall the driver. Seemed a bit too drastic but again nothing to lose was the mantra here.

Step 1: Removing the Driver

First order of business was to remove the Intel driver seeing the computer was useless at this point. This is how I did that:

• First get into safe mode. Since the BSOD is triggered after logging in, the trick is to not log in first but instead Restart from the log in screen while holding down the Shift-key. That should take you to the recovery options. Go to Troubleshoot >> Advanced options >> Startup Settings. You should restart from there to enter safe mode.
• After restarting you should be taken to Safe Mode. Logging in won’t trigger the BSOD because only basic drivers are loaded in this environment. Now go to Device Manager, uninstall the Intel Display Driver and Restart to the normal mode. There shouldn’t be a BSOD this time round.

Step 2: Removing SystemApps and WindowsApps Folders

These are essentially System folders, so deleting them is not a walk in the park. It’s either you acquire their ownership first then try deleting them or the more elegant solution, boot into a Windows neutral environment like a Linux Live CD and yank them out from there. All these seem like good ideas but I wouldn’t advise on deleting anything.

While deleting the WindowsApps folder might not be a big deal the same however is not true for SystemApps since it contains important system apps. So a less invasive approach seems to make more sense and that’s just renaming the folders. This is just in case you need to revert to the modern apps at some later point.

At this point I think I should address the big elephant in the room – doing this will mean losing all your modern apps. That’s the price to pay. So if you’re not ready for that, better to stop here.

For renaming the folders I went with a Linux Live CD. There are quite many out there so use what you’re most comfortable with. Of course if you’re in a hurry you can take ownership of the folders from within Windows and rename them form there. You can read on that here.

The exact location of the folders is as follows:

WindowsApps: C:\Program Files\WindowsApps
SystemsApps: C:\Windows\SystemsApps

Rename the folders as you feel like. For instance, I renamed mine as follows:

WindowsApps: C:\Program Files\Back_WindowsApps
SystemsApps: C:\Windows\Back_Systemsapps

After you’re done, restart your system.

Step 3: Reinstall the Driver

After you’re done restarting, reinstall the Intel driver. I would stick to installing it from the Device Manager rather than using the executable so as to avoid compatibility issues. This is what I mean:

1. Put your driver in an easy to locate place like the desktop. If it’s a single executable file (*.exe), first extract it using 7-zip or Uniextract. The latest driver is available from Intel here.
2. Open the Device Manager by opening the run menu (Win + R), type devmgmt.msc without the quotes, then press Enter.
   
3. From the list of devices, locate Display Adapters. Under it, you should find Microsoft Basic Display Adapter. Double click to open it then go to the Driver tab.
4. Select Update Driver… and in the pop-up window select Browse my computer for driver software.
   
5. Point it to the folder containing the driver and make sure to check the Include subfolders option. Click Next to install the driver.
   
6. The driver should be installed successfully as shown below.
   
7. Exit the device manager and restart your computer.

The Results

So after doing all that and restarting, here are the results:

1024 x 600 resolution (native resolution), no more BSODs after logging in and finally brightness control.

Fixes and Some Possible Solutions

However, all these come at some added costs, other than losing the Modern apps:

1. The Start Menu doesn’t launch when clicked.
   Possible Solutions:
   • Install ClassicShell (no longer updated, use its fork Open Shell) to replace the start menu.
   • Use a launcher like Launchy – if you don’t use the start menu that much, Launchy makes it easy to launch apps and do other fancy stuff using your keyboard.
2. The Battery, Sound, Wi-Fi and Time notification icons don’t work when clicked though their tool tips and right-clicking on them works. Just hover over them to get the battery level and Wi-Fi status.
   Possible Solutions:
   • Battery: Right-click Battery icon >> Power Options to manage battery settings. You can also pin it to the task bar or create a desktop shortcut for it.
   • Sound: Right-click Battery to manage volume and sound devices. You can also use your keyboard buttons to adjust the volume
   • Wi-Fi: Connect Wi-Fi from the lock screen. Oddly, the menu works perfectly from there. You can easily go to the lock screen using Win + L.
   • Time: Right click Time to adjust time/date.
3. Search box and Action Centre (Notifications) don’t work.
   Possible Solutions:
   • Search box: Hide the search box by Right-click on the Taskbar >> Search >> Hidden
   • Search function: For local search use ClassicShell Start Menu search or give Everything a try.
   • Action Centre: Disable Action Centre Icon by Right-click Taskbar >> Notification area: Customize >> Turn system icons on or off.
4. Adjusting screen brightness using the keyboard buttons will most likely not work. To do that, right-click on the battery icon on the taskbar and select Adjust brightness.

Conclusion

Initially I had my doubts whether this solution would work but after trying it, the laptop is at last usable. Of course this comes at a hefty price of doing without the modern apps, which is an integral part of Windows 10. Actually I think it’s the main selling point of Windows 10.

So as far as using Windows 10 in this state is concerned, I think I will pass and stick to Windows 7 – and it’s not just about the chip, I’m just too used to the Windows 7 desktop environment. However that’s just me, so if you really need that Windows 10 upgrade badly I think this is worth giving a try.

I’ll advise on trying this on a dual-boot, which by the way is what I did. This way in case you’re not happy with the results, you can easily switch back to your old system without having to start over again. If you find that too complicated, a proper system back up should suffice. Good luck!.