USB драйвер для персонального компьютера планшета Lenovo IdeaTab A3000
Драйвера идентичны и могут быть совместимы для линейки 2013 (A3000/S6000)
ВНИМАНИЕ!
Для режима прошивки нужен СВОЙ драйвер.
Установка драйвера для работы смартфона в обычном режиме НЕ заменяет
установку драйвера режима прошивки!
Вид: Драйвер расширенной работы смартфона с ПК (Режим модема, режим отладки по USB и т.д.)
Версия: 1.01.1000
Категория: Драйверы и утилиты
Описание: Драйвер USB для ПК — для стандартного режима работы. Идентичен драйверам смартфонов.
Операционные системы: Windows ХР SP2, Windows Vista, Windows 7
Разрядность ОС: х86, х64
Способ установки: Загрузить архив и запустить на компьютере. Согласиться с лицензионным соглашением и нажать далее.
Загрузить пакет драйверов с lenovo-forums.ru
Вид: Драйвер специального режима- драйвер режима прошивки смартфона с ПК
Версия: ——
Категория: Драйверы и утилиты
Описание: Драйвер USB для ПК
Операционные системы: Windows ХР SP2, Windows Vista, Windows 7, Windows 8
Разрядность ОС: х86, х64
Описание:
В пакете содержатся драйвера всех специальных режимов работы планшета и драйвер для получения отладочных данных ADB
Ссылки:Загрузить пакет драйверов для прошивки смартфона (спец-режимы) с lenovo-forums.ru
Установка драйверов для режима прошивки:
Скопировать файлы драйверов *.inf (распакованная папка- копировать только сами файлы, а не папку) в директорию C:\WINDOWS\INF, подключить выключенный планшет к ПК. Windows сам автоматически подтянет нужные драйвера
Если чтото не получиться- просьба отписать в этой теме, ПОДРОБНО изложив свои шаги и реакцию компьютера.
Сообщения типа: «Ничего не получается» будут игнорированы как неинформативные
Having trouble connecting Lenovo IdeaTab A3000 to PC? It might be a driver problem, so download Lenovo IdeaTab A3000 Android USB Drivers and install them on Windows 11, Windows 10, Windows 7, 8, 8.1, or XP PC. The Lenovo IdeaTab A3000 USB Drivers provided here are official and are virus-free. Based on your need, download USB Driver for Lenovo IdeaTab A3000 from the downloads section and install it on Windows PC by following the instructions provided below.
With Lenovo IdeaTab A3000 USB Driver installed on the PC, we can establish a secure connection between Computer and Mobile. It helps transfer data like images, video, documents, and other files from Mobile to PC.
We have also provided Lenovo IdeaTab A3000 ADB and Fastboot drivers, which help pass ADB commands and Fastboot commands to the Phone via Command Prompt (CMD) from the computer.
The Lenovo mobile drivers offered here can be used to flash stock firmware, stock recovery, TWRP recovery, CWM Recovery, Unlocking Bootloader, etc. It can also be used for general purposes, like transferring data and files.
Lenovo IdeaTab A3000 Driver for Flashing Firmware
Download Now
How to install: Follow Tutorial
Lenovo IdeaTab A3000 USB Driver for normal connecting to PC
Download Now
How to install: Follow Tutorial
The Lenovo IdeaTab A3000 Fastboot and ADB drivers can be downloaded below.
Lenovo IdeaTab A3000 ADB and Fastboot Drivers
Download Now
How to install: Follow Tutorial
[!] Note: If you face Driver Signature Error while installing the USB Driver, then watch this video to fix the problem.
Also Download: Lenovo IdeaTab S6000F USB Drivers
How to Install Lenovo IdeaTab A3000 USB Drivers
- Download and extract Lenovo Drivers (LePhone2.0.zip) to your computer.
- After extracting the package, you’ll get the Lenovo USB Drivers setup (LePhone2.0.msi) file.
- Run the Lenovo Mobile Drivers setup file on your computer.
- Now, the Lenovo LePhone Driver Setup window should open, click on Next to continue.
- In the next screen, choose the destination folder where you would like to install the Lenovo LePhone Driver on your computer and click on Next.
- Now, click on the Install button to begin the Lenovo USB Driver installation.
- Wait for the installation to complete.
- Now, click on Finish to exit setup.
- Finally, restart your computer.
- Now you are ready to connect your Lenovo Mobile Phone or Tablet to your computer over USB and use any Lenovo software like Lenovo Downloader Tool, etc.
How to Install Lenovo IdeaTab A3000 USB Drivers Manually
- Download and extract the latest_usb_driver_windows.zip package on your computer.
- Open the Device Manager on your computer by right-clicking Windows Start Button and selecting Device Manager.
- Once the Device Manager window opens, click on your Computer name.
- Now click on Action and then on Add legacy hardware.
- Now Add Hardware Wizard window should pop-up. Click on Next to continue.
- In the next screen, select Install the hardware that I manually select from a list (Advanced) option and click on Next.
- Now select Show All Devices and click on Next.
- Now click on Have Disk… to open the Install From Disk window.
- Click on Browse… and navigate to the folder where you have extracted the drivers in Step #1.
- Now select android_winusb.inf file and click on Open and then on OK.
- Select the Android ADB Interface driver from the list and click on Next.
- Confirm the Hardware driver to install and click on Next to begin the installation process.
- Once installed, click on Finish.
- Follow Steps #3 to #13 again and install the Android Bootloader Interface driver and Android Composite ADB Interface driver.
- Once all the listed drivers are installed, reboot your computer.
Video Tutorial: How to Install Lenovo IdeaTab A3000 Android USB Drivers
Subscribe to Android USB Drivers
How to Install Lenovo IdeaTab A3000 ADB and Fastboot Drivers
- Download and extract 15 seconds ADB installer on your computer to obtain the adb-setup.exe file.
- Now right click on the adb driver installer setup file and click on Run as administrator.
- Now you’ll see a command prompt window with a blue background and white text.
- It should say, Do you want to install ADB and Fastboot? Press the Y key on your keyboard and hit Enter.
- Now, it should ask whether you want to install ADB system-wide? Again press the Y key and hit Enter.
- Now, the ADB and Fastboot installation process should begin.
- When finished, it should say, Do you want to install device drivers? Press the Y key and hit Enter.
- Now the «Device Driver Installation Wizard» window should open.
- Click on Next to continue installing the Google USB Drivers (WinUSB).
- Once installed, click on Finish and restart your computer.
Video Tutorial: How to Install Lenovo IdeaTab A3000 ADB and Fastboot Drivers
Subscribe to Android USB Drivers
Important Notes:
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] Broken link: Report here.
[*] Have we missed any device model? Let us know by contacting us via Contact Us page.
Reader Interactions
Home » Lenovo » Lenovo IdeaTab A3000 USB Driver
If you are an owner of Lenovo IdeaTab A3000 and looking out for USB drivers to connect your device to a Windows computer, you have landed on the right page. Download Lenovo IdeaTab A3000 USB driver from here, install it on your computer and connect your device with PC or Laptop successfully.
Here, we have provided two USB drivers for your Lenovo IdeaTab A3000.
USB Driver Type: Lenovo Driver
USB Driver Purpose: For flashing Stock firmware on your device.
File Size: 9.38 MB
Download Now
USB Driver Type: ADB Driver
USB Driver Purpose: For connecting your device to a computer.
File Size: 8.3 MB
Download Now
Steps To Install Lenovo IdeaTab A3000 Driver In Computer
Video Tutorial
If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.
Step 1: To get started, download Lenovo driver from the link given above and extract it on your desktop.
Step 2: Once extracted, you will see a folder containing the Lenovo USB Driver Setup file.
Step 3: Now click on the Lenovo Driver Setup file to launch the installation Wizard window and then click “Next” in the setup wizard.
Step 4: Again, click “Next” in the Setup wizard to open Choose Install Location wizard.
Step 5: Now you have to select the destination folder. Once done, click “Install” to start Installation.
Step 6: Next, click “Finish” to complete installation.
That’s it. Your Lenovo device driver is now successfully installed on your computer.
Steps To Install Lenovo IdeaTab A3000 ADB Driver In Computer
Video Tutorial
If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.
Step 1: To get started, download the driver and extract it on your desktop.
Step 2: Now, open Device Manager > Action > Add legacy hardware.
Step 3: Next, click “Next” in the Add legacy hardware wizard.
Step 4: Now choose “Install the hardware that I manually select from the list (Advanced)” and click “Next“.
Step 5: Once done choose “Show all devices“, click “Next” and select the extracted file manually from your computer.
Step 6: Now to start installing your new hardware, click “Next” again.
Step 7: Click “Install” in the Windows security prompt window.
Step 8: Next, click “Finish” to complete installation.
That’s it. Now you have successfully finished installing ADB driver in your Computer. If you encounter any issues while following this tutorial, do let me know via comments.
Note: Download Lenovo IdeaTab A3000 stock ROM, flash it on your bricked device and unbrick it easily.
Boopathy Sundaramoorthy is a tech and Android enthusiast working for AllUSBDrivers.com from 2018. He loves helping Android users to find the right USB drivers for their devices so that they can connect their smartphone or tablet to a computer.
Reader Interactions
On this page, we have managed to share the official USB driver of the Lenovo IdeaTab A3000 Device. If you were already searching for the USB driver of the device, then this page will help you out.
There is 1 USB driver available for the device, i.e., ADB Driver. The ADB Driver can be useful for establishing a connection between the mobile and the computer.
Lenovo IdeaTab A3000 ADB Driver
You can use the ADB Driver to connect the mobile (powered by android) to the computer and transfer data between the mobile and the computer.
Driver Name: Android ADB Driver
Package Name: usb_driver_r13-windows.zip
Driver Size: 8.27 MB
How to Install: Follow Guidelines
Get Driver
How to Install any USB Driver Manually
- Download and extract the USB driver on the computer.
- Open Device Manager (devmgmt.msc) and Click on the Computer Name > Action Menu > Add Legacy Hardware.
- Click on the Next button.
- Select the Install the hardware that I manually Select from a list checkbox and Click on the Next button.
- Again, Click on the Next button.
- Click on the Have Disk > Browse > Locate the .inf file (found in the extracted driver folder) and Click on Open Button.
- Click on the Finish button to complete the installation.
Follow Complete Guidelines
Readme Once:
[*] Driver Signature Error: If you are facing Driver Signature Error while installing the USB Driver, then head over to How to Fix Driver Signature Error page.
[*] Driver Easy: We recommend you to use Driver Easy application to update all the computer drivers in a Single Click.
[*] Lenovo IdeaTab A3000 Stock Firmware: If you are looking for the Lenovo IdeaTab A3000 Stock Firmware, then head over to the Lenovo Firmware page.
Lenovo IdeaTab A3000 USB Driver allows you to connect your Lenovo device to the Windows Computer without installing a separate Lenovo PC Suite Application.
In addition, the Lenovo IdeaTab A3000 USB Driver can be helpful if you try connecting your Lenovo device to the computer to transfer/sync data between the device and the windows computer.
Lenovo IdeaTab A3000 USB Driver for Windows
Lenovo IdeaTab A3000 USB Driver allows you to connect your Lenovo device to the Windows Computer and transfer data between the computer and the Lenovo device. It also allows you to sync data between the device and the computer, back up your existing data or restore it on the Lenovo device.
There are several circumstances when you might need to install the Lenovo IdeaTab A3000 driver to connect the computer. They are:
- Transfer data from the Lenovo device to the computer or the device.
- To free up the device space.
- Install the Stock Firmware (OS) on the device.
- To Write/Flash IMEI on the Device.
Download Lenovo IdeaTab A3000 USB Driver
For Device: Lenovo IdeaTab A3000
Driver Size: 9.37 MB
How to Install: Follow Guidelines
Compatible with: Windows Computer (32-Bit and 64-Bit)
Download
Frequently Asked Questions
What is Lenovo IdeaTab A3000 USB Driver?
The Lenovo IdeaTab A3000 USB Driver is a free software primarily used to install the Lenovo Drivers on the Windows Computer with a few clicks.
How do I install the Lenovo IdeaTab A3000 USB Driver?
You can install the Lenovo IdeaTab A3000 USB Driver by downloading the .exe file and installing the driver on the computer. The installation process is quite similar to the standard Windows Application. You can follow the How to install the Lenovo Driver page to install the drivers correctly.
Is Lenovo IdeaTab A3000 USB Driver Free?
Yes. The Lenovo IdeaTab A3000 USB Driver is 100% free since the Lenovo community officially releases it for Lenovo Mobile users.
Is Lenovo IdeaTab A3000 USB Driver Safe?
Yes. The Lenovo IdeaTab A3000 USB Driver is 100% safe for computers, laptops, and Lenovo devices. Furthermore, since the Lenovo community officially releases the driver, it’s 100% safe & secure to use on the computer.
Where Can I find Lenovo IdeaTab A3000 Firmware (ROM)?
If you are looking for the original Lenovo IdeaTab A3000 Firmware (Stock ROM), then head over to the Lenovo Firmware page.