Hp pc hardware diagnostics windows 10 скачать

Are you using an HP laptop? Do you want to check its hardware failures? HP hardware diagnostics tool may be what you need. In this post, MiniTool introduces the HP PC hardware diagnostics in detail and some extra useful tips to you.

When it comes to HP hardware failures or other problems like HP black screen, lots of people may want to use the HP hardware diagnostics tool. However, many of them are unclear about the HP UEFI diagnostics or encounter some issues while using it.

If you are also troubled by these questions, you come to the right place. We will explain the definition and provide a download/install/use guide for this tool.

What Is HP Hardware Diagnostics

As its name implies, HP PC hardware diagnostics is a hardware test tool that can identify, diagnose, and troubleshoot possible hardware issues with HP personal computers. This tool allows you to test many types of devices, including battery, processor, system board, hard drive, memory, wireless module, video memory, etc.

In addition, the HP UEFI diagnostics version can run outside the operating system. So, it can isolate hardware failures from issues that are triggered by the operating system or other software components.

The HP diagnostics tool comes in 2 versions: HP PC hardware diagnostics Windows and HP PC hardware diagnostics UEFI. You can perform different types of tests with the Windows version, while the HP PC hardware diagnostics UEFI version allows you to check hardware failures even when you cannot boot into Windows.

In a word, HP PC hardware diagnostics is a practical and comprehensive hardware diagnostics tool that provides customized test options according to users’ demands. There are 4 main test options in this tool, including:

• System Fast Test: This option helps you identify hardware issues quickly and make sure the main components functioning properly. It’s divided into a 1st pass and 2nd pass and each pass can run multiple tests.
• System Extensive Test: If no system component failed during the Fast Test, you can run this test. But it may take 2 or more hours to complete.
• Component Test: It checks the hardware subsystems to ensure they are functioning properly.
• Symptom Test: This test is only available for the HP PC hardware diagnostics UEFI version. It can be used to identify the root causes of the hardware issues.

How to Download & Install HP PC Hardware Diagnostics

As mentioned above, the HP diagnostics tool comes in 2 versions – the Windows version and the UEFI version. Here you can choose the following download/install guide according to your needs.

#1. Install the HP PC Hardware Diagnostics Windows Version

If your computer can boot normally, we recommend you download/install the HP PC hardware diagnostics Windows version.

Click here to open the HP PC hardware diagnostics Windows download webpage and click on Get in Store app. Then it will open the Microsoft Store app and download and install this tool automatically. Alternatively, you can directly search for the HP diagnostics tool in Microsoft Store and then download/install it.

#2. Install the HP PC Hardware Diagnostics UEFI Version

As mentioned above, the HP UEFI diagnostics tool works like bootable media when your system doesn’t boot. So, you need to install it on an EFI partition or a USB drive. Here’s how to do that:

Step 1. Visit the official HP Hardware Diagnostics website and download the HP diagnostics tool UEFI version.

Step 2. Once downloaded, run the executable file, click Next and accept the license agreement.

Step 3. In the installation location, select the UEFI partition on your hard drive or a USB drive for the HP PC hardware diagnostics tool, and click on Next.

Step 4. Click on Install and then on Yes to create the HP-Tools partition on the selected drive.

Step 5. Wait for the installation to complete and click on Finish to exit the wizard.

Now, you should have installed this tool successfully. Let’s see how to use it for hardware diagnostics on Windows 10.

How to Use HP PC Hardware Diagnostics

Similarly, we will show you how to use the HP PC hardware diagnostics Windows and UEFI version separately. Select one guide according to your situation.

# 1. How to Run the HP PC Hardware Diagnostics Windows

As discussed above, the HP PC hardware diagnostics Windows edition mainly offers 3 test options – Fast Test, Component Test, and Extensive Test. Here’s how to run these tests to check your hardware failures.

How to Run HP PC Hardware Diagnostics System Fast Test:

1. Run the HP diagnostics tool Windows app to get into its main interface.

2. Select System Tests from the left action panel, and then go to the System Fast Test tab and click on Run.

3. Wait for the process to complete and it will show test results for each component.

4. If any component fails are found, you can click on Troubleshoot and follow the on-screen instructions to solve the problem. If no problems are found, click on Run Once to run the 2^nd pass of this test.

5. If the problem cannot be fixed, click on Yes to contact HP Customer Support. When you contact HP Customer Support, write down the failure ID and Product ID. The information can be found in Test Logs from the main interface.

If no system component failures are detected, follow the guide below to run the Extensive test.

How to Run HP PC Hardware Diagnostics System Extensive Test:

1. In the main interface, select System Tests from the left panel again and go to the System Extensive Test

2. Click on Run. This process may take you a while and please wait for it to complete patiently.

3. If any fails are detected, click on Troubleshoot to repair them or click on Yes to contact Customer Support.

If the Extensive Test doesn’t still detect a hardware failure, you can try running the components tests.

How to Run HP PC Hardware Diagnostics Component Test:

1. In the main menu, select Component Tests from the left panel.

2. Expand each hardware category and tick the component that you want to check, and click on Run.

3. Wait for the test to complete. Then you also can check the failure ID from the Test Logs and try fixing the issue.

#2. How to Run the HP PC Hardware Diagnostics UEFI on Startup

Sometimes, however, Windows may fail to boot normally. In this case, you can use the HP PC hardware diagnostics UEFI on startup. Here we will show you run the tool with a USB drive and perform the hardware tests.

How to Run HP PC Hardware Diagnostics UEFI on PC:

1. Hold the Power button for about 5 seconds to power off your computer.
2. Power on your computer and press the ESC key at once repeatedly during the startup. Then press the F2 key to enter the HP PC Hardware UEFI main menu.

How to Run HP PC Hardware Diagnostics UEFI with a USB Drive:

If the diagnostics tool is not available on the computer, you can run it from a USB drive.

1. Insert your USB drive where the HP PC Diagnostics UEFI is installed into the machine, and then power on your computer and press the Esc key repeatedly until the Startup menu displays.

2. Press F2 to select System Diagnostics. Then it will launch the HP PC UEFI diagnostics tool.

3. In the HP diagnostics UEFI menu, you can select a test option to check your hardware. Since the procedure is similar to the process using the Windows version, you can refer to the on-screen prompts to complete the test.

How to Fix HP PC Hardware Diagnostics UEFI No Hard Drive Installed

Many users encounter the HP PC hardware diagnostics UEFI no hard drive installed error. If you are troubled by this issue, you can try the following quick guide below to fix it.

Step 1. Make sure your hard drive is connected/installed problem and no drive cable issues are here.

Step 2. Make sure the related drivers are updated. Also, you can try running the Hardware troubleshooter to check the hard drive.

Step 3. Enter the HP PC Diagnostics UEFI menu as we explain above and select Component Tests.

Step 4. In the Component Tests menu, select Hard Drive to initiate a test and check what causes the error.

If the HP diagnostic tool still can’t run the hard drive test, you may consider using another disk test tool like MiniTool Partition Wizard.

I don’t know how to install HP PC hardware diagnostics UEFI. Fortunately, I found this post. It provides a full download/install/use guide. Probably you are looking for this.Click to Tweet

In addition to the HP PC hardware diagnostics UEFI no hard drive installed error, some users reported that they encounter the black screen issue while using this tool. Under these situations, you may need a professional hard disk test tool. MiniTool Partition Wizard is such a tool that can check bad sectors but also repair logical disk errors and measure disk performance.

MiniTool Partition Wizard FreeClick to Download100%Clean & Safe

#1. Check Bad Sectors on Hard Drive

Step 1. Launch the MiniTool software to enter its main interface, select the target drive and click on the Surface Test from the left pane.

Step 2. Click on the Start now button in the pop-up window. After that, this tool will scan the whole disk immediately and show you the test result.

#2. Check File System on Hard Drive

Step 1. In the main interface, select the drive that you want to check and click on Check File System from the left action panel.

Step 2. In the pop-up wizard, select the Check & fix detected errors option and click on Start. Then the program will start scanning for file system errors and try repairing them. If you want to repair a system drive, you need to click on Yes and check that next time your system restarts.

#3. Measure Your Hard Drive Performance

Step 1. In the main interface, click on Disk Benchmark from the top toolbar.

Step 2. Select the drive letter that you want to check from the drop-down menu and click on the Start button to test the disk performance.

Step 3. Wait for the disk benchmark to complete. Then you can view the data speed, including transfer size, random sequential read and write speed, etc.

Bottom Line

This post focuses on what the HP hardware diagnostics tool is and introduces the install/use guide. In addition, we provide fixes to the HP diagnostics UEFI no hard drive installed issue.

If you have other opinions about this subject, write them down in the comment area. Also, you can directly contact us via [email protected] if you have problems with MiniTool Partition Wizard.

HP PC Hardware Diagnostics UEFI

HP PC Hardware Diagnostics UEFI (UEFI) is a comprehensive diagnostic and system information tool that helps you quickly and easily diagnose and troubleshoot hardware and system issues on your HP PC.

HP PC Hardware Diagnostics UEFI helps quickly identify and troubleshoot hardware problems.

Features:

The following are some of the features of HP PC Hardware Diagnostics UEFI:

• Automated testing – Quickly and easily run a full suite of diagnostic tests on your system to identify potential hardware issues.

• System information – Quickly view system information, including memory, storage, processor, and graphics information.

• System health – Check the overall health of your system and identify potential hardware problems.

• Customizable testing – Customize the tests you run to fit your needs and requirements.

• Comprehensive coverage – Diagnose hardware components such as memory, storage, processor, and graphics.

• Easy-to-use interface – Intuitive and user-friendly interface makes it easy to use.

• Support – Get access to helpful support resources, including the HP Support Assistant.

• Advanced diagnostics – Diagnose more advanced components such as USB and RAID controllers.

• System upgrade – Update system BIOS, drivers, and firmware.

• Software updates – Automatically check for and install updates.

• Troubleshooting – Quickly diagnose and troubleshoot hardware and system issues.

• Easy installation – Easy installation with a simple setup wizard.

• Secure – Data is encrypted during transmission and storage.

• Comprehensive help – Comprehensive help and support resources available.

• Log files – Create and save log files for easy troubleshooting and diagnostics.

• Customizable settings – Create and save settings to fit your needs.

• Multiple languages – Supports multiple languages.

• Compatibility – Compatible with most Windows-based PCs.

• Free trial – Download and use the trial version for free.

Conclusion

HP PC Hardware Diagnostics UEFI is an advanced diagnostic and system information tool that offers a comprehensive suite of tests and system information to help you quickly and easily diagnose and troubleshoot hardware and system issues on your HP PC. With its intuitive and user-friendly interface, automated testing, customizable testing, comprehensive coverage, secure transmission and storage, and support resources, HP PC Hardware Diagnostics UEFI is the perfect tool for diagnosing and troubleshooting hardware and system issues.

На этой странице вы можете бесплатно скачать Драйвер для HP 15-g001sr PC Hardware Diagnostics UEFI v.5.8.1.0 Rev.B

Похожие файлы:

 

If you want to find out details about certain components of you laptop then this software can do it. It will show detailed info about CPU, RAM, video card, BIOS and other hardware components. This is an application that comes in handy to make sure that you have a chance to handle all the diagnostic functions of the HP brand of computers. It is good application for you to run all the testing and diagnostic functions. You really do not need to guess any challenges that the system may experience.

All you need is just to make sure that you have this application downloaded in your system. At the same time, you it is just a portable application in such a way that you just do not need any installation. It just uses the plug and use application for the same purpose. It is a tool that has no discrimination on the level of use. At the same time, you really need no special knowledge for the same.

Using the application, you will just have to make sure that there are no registry files remaining behind. At the same time, you must also be in a position to handle all the simulation function to a point in which the application digs deep down into the system to have a chance too get all the system details and run the diagnostic procedures.

HP System Diagnostics Utility is licensed as freeware for PC or laptop with Windows 32 bit and 64 bit operating system. It is in system info category and is available to all software users as a free download.