Empire earth не запускается на windows 10

Please keep in mind that Empire Earth is a game designed for Windows 98 and relies on components that are not well-supported on modern versions of Windows. The help provided on this page aims to assist you in running the game. While some solutions may work, most of the time you will need to explore and combine various fixes. This is the trade-off necessary to be able to enjoy this amazing game. We do our best to get the Community Setup to do most of the work, but sometimes that’s not enough.

The following help will attempt to avoid using overly technical terminology and guide you through correcting the game’s errors without requiring advanced technical skills. However, please note that it does have its limitations, and certain sections may require careful attention on your part.

The inevitable, the crash when you think you can finally play.

Here is a list of possible solutions :

If you have used the Community Setup:

• Try to change the DirectX Wrapper version or to don’t use any
• Try to disable compatibility options
• Try to set your monitor resolution to a resolution lower than 1920×1200

If none of the above solutions work for you, continue reading this help.

Open the application “Regedit”:

• Navigate to “HKEY_CURRENT_USER\Software\SSSI\Empire Earth” for Empire Earth
  or “HKEY_CURRENT_USER\Software\Mad Doc Software\EE-AOC” for The Art of Conquest
  (Remplace “SSSI” with “Neo” and EE-AOC with “Art of Conquest” if you use NeoEE)
• Try to set the value of “Rasterizer Name” to “Direct3D Hardware TnL” or “Direct3D”
• Continue to read the help

Disable Anti-Virus:

• Open Windows Defender or your Anti-Virus if you installed another one
• Disable the real-time protection (or any “execution” protection)
• If it work add the game to the Anti-Virus exceptions, and in all cases enable the protection back.

AoC won’t start:

•  If you copied game files from a computer to another that’s normal. AoC require EE to have been started at least one time on the computer.

Empire Earth can be very slow in the following conditions:

– You may not be using the right rendering mode:
Try in the settings of Empire Earth to change between TnL and not TnL, sometimes this is enough. Most of the time TnL is slower because it consume more CPU.

– You are using a laptop with a low performance integrated graphics processor (concerns almost all integrated graphics processor released before 2021):
There is no miracle solution unfortunately, your PC is simply limited, the version of Intel HD Graphics released before 2021 (present on a large part of public PCs) are not only poorly performing but also very poorly realized and poorly optimized. You should be able to get a little more performance using dgVoodoo if the performance is bad without it, try all the dgVoodoo configurations available in the Community Setup, maybe you will see some changes. (If you don’t have used the Community Setup you can try to add it yourself)

– You have set Empire Earth in a resolution higher than 1920×1200 :
Even if the game allows it with some patch from the community it is absolutely not recommended, indeed the game engine (using DirectX 7) is not made for resolutions higher than 1920×1200 and will suffer from heavy performance problems even on good hardware. If you know a little bit about it you can tweak it with dgVoodoo to get an almost correct result.

– You may not be using the right graphics card:
Sometimes computers (especially gamer laptops) have 2 graphics cards, one for general use of the computer, low power and low performance, and the other high performance and very power hungry. It is possible that Windows is launched the game with the low performance card, you should be able to change that in “System > Display > Graphics”

– You are using dgVoodoo:
For some unknown reason, changing the rendering mode (TnL/not-TnL) while the game is running seems to allow dgVoodoo to refresh the display and run better during the current session.

–

If you are using dreXmod.dll or Reborn.dll or any other mod that allows you to modify the game camera, it is possible that the camera is too high. The higher the camera is and the more units to be displayed, the more Empire Earth has an increasing performance requirement.
In that case try to reduce the height of the camera:
dreXmod.config: config -> Camera -> Zoom -> <MaxZ>X</MaxZ>
Reborn.ini: Camera -> MaxZ = X

The iGPU (integrated graphics processor), especially on the Intel (HD Graphics series) side which are the most present on computer, and old AMD graphics cards suffer from compatibility and performance problems on Empire Earth.

– You should be able to solve this problem by using dgVoodoo with the Community Setup. If this is not enough or if new problems appear, refer to the other guides on this page (also maybe read the “Game slow/low FPS” help section).

NeoEE uses an identification system at the time of installation to register your computer with the servers. If this message appears, it is probably because the installation did not go well (too much re-installation in a short time, using a Virtual Machine, etc…).

If you use NeoEE:

• Use the Community Setup and install the game as administrator (this is technically not required but better)
• Disable your Antivirus and then reinstall/repair NeoEE (don’t forget to enable it again after)
• Use the old (deprecated) official NeoEE Setup (don’t forget to disable your Anti-Virus), remember that this setup don’t provide Empire Earth, you need to install it before (Because this setup is a “patch”).
• Ask Empire Earth Reborn devs to give you a CD Key

If you don’t use NeoEE:

• In the folder where Empire Earth (and if installed AoC) is installed, there is a file called “WONLobby.cfg”, open as administrator (can work somethime without admin) a text editor and edit that file by remplacing the line “CDKeyCheck: true” to “CDKeyCheck: false”

For a weird reason you may start the a game and instantly get the end message without being able to play.

To fix the issue, you need to replace the decimal symbol of the Windows region settings.

Control Panel > Region & Language > Additional Settings > Decimal Symbol > Replace , with . (coma with dot)

“Your game version does not match the host’s version”… right ?

This is due to a very simple thing, you try to connect to a game hosted by a player who does not have the same version of the game as you.
But be careful, Empire Earth manages the versions in a very strange way, indeed, some mods modify the version of the game. If you or the remote person has mods that modify the models or some values of the game, Empire Earth will indicate a different version on the main menu.

The original version of Empire Earth (up to date) is 2.0.0.3466.
The original version of The Art of Conquest (up to date) is 2.0.0.2657.

The NeoEE (2.0.0.5) version of Empire Earth is 2.0.0.3750.
The NeoEE (2.0.0.5) version of The Art of Conquest is 2.0.0.7590.

If you didn’t used the Community Setup and installed the game with GOG Setup or GOG Galaxy read the [Warning] at the end of this help section.

Check the game name, maybe the host added “[Name of a mod/modpack]” meaning that he is aware and wait for persons who also have the same mod/modpack.
Else, you or the host player must have modified the game, any content added in \Data\db or \Data\Models will change the game version (or any change to .dll files of the game).
Unfortunately, even if at first sight the game doesn’t look incompatible, it is, just use the original game. Note that custom textures and sounds don’t change the game version you are free to use them without problems (but check that they don’t come with models it could be the cause).

More on EE versions wiki on Github.

[Warning] For some time GOG has been distributing a version of Empire Earth that contains modifications that change the version of the game (2974?). If you have downloaded your setup on GOG (or GOG Galaxy) the problem probably comes from there. Try to use the community setup after uninstalling the version currently installed.

So there’s nothing magical about it. If during the game a snail of your color appears it means that your connection is bad and that you should really stop playing online and bothering others.
More seriously, Empire Earth doesn’t require a lot of bandwidth (on the contrary we are talking about a game from the 2000’s). So it’s probably due to your ping. The ping is the time that passes between the moment you send an information and the person receiving it (in ms).

Try to get as close as possible to your router, or even use ethernet if possible.

But sometimes, when some players are too far away (on the other side of the world) there’s nothing you can do, it’s just not possible to go any faster.

This problem occurs when the game is unable to share the map (saved game) with other players.
It is very likely that you have not set up port forwarding for the game or have never heard of it. As a matter of fact NeoEE has a multiplayer technology that allows you to play online without setting up this famous “port forwarding”, but this technology unfortunately does not support save game sharing.

You have two solutions:

– Set up port forwarding for Empire Earth
– Transfer the saved game (“\Data\Saved Games” from the game directory) to other players computer, it can be done through any app you want to use and he has to place the file in “\Data\Saved Games” from other players game directory folder. Then the game will not have to upload the game save since everyone have it.

Associated help page.

Can’t host a game? Be careful, Empire Earth is an old game, there is not a big server hosting the game for you. No, it’s the person who create the game who host it, so we want to allow computers outside your local network (on the same wifi as you) , we want to allow computers over the whole internet right ?

To do this you need to make a modification from the interface of your internet box (probably at http://192.168.1.1 every router are different check online for help about your router model and port forwarding).
You must port forward the Empire Earth ports to the computer that will host the game.

To port forward, open TCP: 33334 to 33336 and UDP: 33334 and 33336 and as destination your computer. Once this is done, normally computers from all over the world will be able to play on a game you host.
If you use NeoEE the procedure is the same but you may only have to activate the UPnP option on your box, but very rare are the people who reported that it works.

On old computers, EE Lobby can generate a WS_ServerReq_NoServerSpecified if the game can’t even communicate with internet, in that case check the firewall!

Note for China located players:
Well, you proably know that there is a very cool firewall that protect you from the ouside world… Sadly this “great” firewall block a lot of player to play with you, the best thing you can do is to take a VPN to avoid the firewall restriction (Important note: that VPN need to support port forwarding!)

It is possible that the text is strangely small when you play. This is probably due to the fact that your screen has a zoom factor. Easily verifiable in the Windows display settings, laptops are often at 125% or more depending on their resolution.
Normally the Community Setup should fix this bug, but it’s possible that you don’t want to use it if the fix doesn’t work, here’s what you can do:

– In the Windows compatibility options of Empire Earth try to replace the game scaling with the proposed modes (right click on game shortcut or executable, property, compatibility) .

– Set your screen to 100% scale before playing and restore the right size after (don’t change your desktop icons when you are still at 100% or you will lose the usual scale desktop layout of your screen).

On some computers, game startup is slow: several seconds may pass between the request to start the game and the display of the logo informing you that the game is loading. Sometimes this same logo is displayed for several seconds before the main menu appears.
Under normal circumstances, the logo should appear almost instantly, and loading should be fairly short.

This problem is usually solved by changing the compatibility settings with an earlier version of Windows.

You should be able to do it yourself, right ?
…but here are 2 informations:

You should be able to install Empire Earth from Lutris automatically or manually with the Community Setup.
If your game crashes with NeoEE when you try to create a game (at the same time as a black connection page is supposed to appear) then go to the NeoEE.cfg file and edit “ShowGUI” to false (the Community Setup do it for you automatically).

Hello guys,

I’m actually a old Neoee player. I could play EE on NeoEE on Windows 10 before. Now i wanted to play again and trying to make it work for like 2 days straight.

System : Windows 10.
GPU : Nvidia 1660 TI and Intel HD Graphics 4600.
CPU : Intel I7-4790 3.60 GHz

(I already tried all Compability settings on any EE i installed)

First I installed «EE UNLIMITED» and tried to run setup but i get the same error message from all setup files which is «An error occured while launching the setup. The remote procedure call failed.»

Then I found 3-4 different EE already installed in a folder. (Including pre NeoEE installed from Neoee’s official website.)
and one of them is GOG.

One of them is perfectly opening EE(No NeoEE or anything). But neither NeOEE installed EE or GOG version of EE is working.). I do not even see the Empire Earth Logo at the start.

Then I installed NeoEE installer to working EE’s folder and it did not work as usual.

Then I started to swap files from working EE to pre-installed NeoEE EE one by one. To see which file is making the problem. Then I think i found the file that makes EE not run which is low level engine.dll. When you run NeoEE installer, it changes the low level engine.dll and then it does not work. When I copy low level engine.dll from working EE to NEoee, it just gives an error.

I have no anti-virus and turned off Windows Defender.

I have no idea how to solve it. Please help!

It is said that many many installations and registration keys could be a problem. I also had similar issues a few years ago (weird errors, dll. missing or nothing happened).

But before you try my suggestion below: Are you sure you chose the right EE.Exe or directory when you install Neo? As you said one folder works to start, maybe you just need to manually select this folder and it works? You can chose manual or express choose.

IF this not works may try this:
I advise you to remove all remnants of EE completely with a program
(incl. Registry clean, use «CCleaner» free program after deinstallation to clean up unused or old registry keys, suggest you make a «safe» as the programm recommends but i never had an issue tbh). You may want to save your Names/civs/saves/lobby background images, friendlists or whatever *_*)

To delete all files / keys, use a program like «revo uninstaller» or similar (a free program i recommend cause i had success with it with similar issue, https://www.revouninstaller.com/revo-un … -download/). With this you can also search for remnants of the deinstallation and remove it completely.

I also suggest to restart your Pc after cleaning the PC of EE first before the new installation (make sure all folders are gone).

I have solved similar stuff with this. GL

try this for the moment

1. Go to Control Panel -> Apps&Features and delete every instance of Empire Earth
2. You can do what the guy above said, it can be true, although it’s kind of a hard case when it comes to EE, as EE doesn’t make that many registrys, and not even installs files into windows folders.
CCleaner can help to remove those kind of stuff, although just Right-Clicking the partition in where the windows is, and do a Disk Cleanup should be enough.

3. Download and install this Installer, it’s based on the GoG version ( even tho i saw that you tried that, try this aswell )
https://drive.google.com/file/d/1tltvKv … lK6QV/view

4. Once installed, enter the game to check if it does.
5. If it does, Install NeoEE and check again, but make sure firewall is allowed, both public and private.
6. If it still doesn’t, say it here again.

If it’s indeed just that file, there might be the case in which your windows blocked the .dll file as it doesn’t trust it.
To do so, right click that .dll -> Security Tab and check if you have a «unblock» box.If you do, check it, if you don’t, and something like this appears :

Press on the Edit button : and check the boxes except for Full Controll and Special Permissions.

Hello guys. I recorded all the actions i made. VIDEO -> https://www.youtube.com/watch?v=XKC_zth5dbA

I tried everything you guys said above. First I cleaned Empire Earth and its registry points with CCleaner. Then I restarted my computer and start recording.
Bogdan, I tried giving full access to every single exe or setup i tried before so it does not fix it.

As you guys can see in the video it does not even show the EE logo. Actually this EE version in the video : «Empire Earth Working Windows 10 By Wildone Productions» works perfectly. I just forgot to change compability mode to windows 8 in the video so it just shows the logo and closes.

I’m pretty sure the problem is low level engine dll. There is a size difference between neoee’s and original ee’s low level engine.dll. And you cannot swap them.

Maybe something is conflicting with neoee’s low level engine.dll in the windows 10. Neoee’s developer should know about this one, i guess.

[EDIT] Also GoG’s The Art of Conquest version is working too. (Before I install Neoee). I forgot to change compability mode to windows 8 as well. (It does not work after i install neoee patch tho).

Any other suggestions?

not the EmpireEarth.exe security

the .dll security…
low-level-engine.dll -> Security -> and check the boxes i said, except Full Cotroll and Special Permissions.

Also, try to open the game with the Shortcuts that NeoEE is creating on the desktop.

At this point there would be just one more way to see if it works.

Reinstalling a fresh windows, followed by ee abd neoee.

There’s small chance of certain windows files missing or being in conflict with neoee files. If it would still not work, then i honestly dont know what could cause it and how to solve it. Only Jodocus might

Omg. I actually solved it by myself. I checked Event Viever to see what is the error for not starting the game.

Then I saw the error code is : «Exception code: 0xc0000005» and the Event name is «BEX».
Which is often about Data Execution Prevention(DEP). Causes old games not to run.

I made it inactive for Empire Earth then BOOM, it works.

For people facing the same problem for Windows 10.

1-> Type «view advanced system settings» to search bar.
2-> Go to Advanced tab.
3-> In performance section, open «Settings».
4-> Go to Data Execution Prevention tab.
5-> Select «Turn on DEP for all programs and services except those I select:»
6-> Click «Add» and Select your Empire Earth.exe