Cp2102 драйвер windows 7 x64

Как правило, платы Arduino имеют встроенный USB-TTL преобразователь, позволяющий без труда подключить Arduino к компьютеру для загрузки прошивки. Оригинальные Arduino, как правило, используют для этих целей программатор FTDI от Шотландской компании FTDI Chip. Однако на рынке представлено и много других неплохих программаторов, позволяющих прошивать большой ассортимент различных микроконтроллеров. Одним из таких программаторов является CP2102 от американской компании Silicon Labs.

Программаторы серии CP2102 обрели популярность ввиду своей дешевизны и качественных драйверов с поддержкой большого количества операционных систем. Драйверы CP210X являются универсальными, поэтому установив их единожды, вам не придется искать дополнительные для другой версии программатора.

Как установить драйвер CP2102 на компьютер?

Установка драйвера CP2102 производится в несколько простых шагов:

1. Скачиваем драйвера по ссылкам выше
2. Распаковываем архив с установочными файлами
3. Запускаем исполняемый файл (SETUP)
4. В открывшимся окне соглашаемся с установкой
5. Перезагружаем компьютер для корректного обновления данных в реестре

После установки драйвера заново подключаем контроллер и смотрим, чтобы плата корректно отобразилась в списке диспетчера устройств. Устройство будет иметь название SILABS CP2102.

Программаторы CP2102 в нашем магазине

Смотрите также

The CP2102 USB to UART Bridge driver you can download below. Silicon Labs who manufactures the CP2102 chipset has stated that this chip should not be used in new designs and to look at other options. The CP2102N is now the recommended chipset instead of the CP2102 which they also make. The drivers for the CP2102 USD to UART bridge are royalty free and it is plug and play compliant.

CP2102 USB to UART Bridge Driver

The CP2102 USB to UART is a plug and play compliant and are also USB 2.0 compliant. You can also see other drivers for the UART such as the FT232r USB UART driver as well as the FT232R USB UART which you will also find on this website.

This article covers the CP2101, CP2102, CP2103, CP2104, CP2105 and CP2108 USB to UART bridge devices. This will show you how to obtain the port number of a specific CP210X device be this the CP2102 or any other devices in this range of bridges. Note that the vendor ID (VID), product ID (PID) and serial number determine the port number of the device.

The CP2102/9 USB-to-UART Bridge Controller allows you to update RS232 designs to USB using minimum  components and PCB space. The CP2102/9 also includes a USB 2.0 full-speed function controller as well as a USB transceiver, oscillator, the EEPROM or in some cases the EPROM, as well as an asynchronous serial data bus (UART) with full modem control signals. See also the CP2102 driver and Installing the CP2102 Driver as well. Download the CP2102 driver Windows 10 below.

With the on-chip programmable ROM you can also customise the USB Vendor ID, Product ID as well as the Product Description String, Power Descriptor, Device Release Number, as well as the Device Serial Number. This can be changed and programmed via the USB connection from your computer. This is the easiest way to setup and test the CP2102 USB to UART Bridge device. See the cp2102 driver listed below.

In most cases you will not need to change or modify the existing system firmware as the CP2102/9 UART interface implements all RS-232 signals which includes control and handshaking signals. You can download the cp2102 driver listed below.

CP2102 USB to UART Bridge Driver – Windows (Win 7.1 +Win

CP2102 to UART Bridge Driver – Windows (Windows 10)

CP2102 to UART Bridge Driver – Linux

Latest CP2102 Driver:

CP210x Universal Windows Driver (Version v11.2.0 Date:  10/21/2022)

CP210x VCP Mac OSX Driver (Version v6.0.2 Date 10/27/2021)

Latest MAC OSX driver.

Driver 3/22/2022 Version  v11.1.0

• CP210x Universal Windows Driver (Version : v11.1.0 Date : 3/22/2022)

• CP210x VCP Windows (Version : v6.7 Date: 9/3/2020)

• CP210x Windows Drivers (Version: v6.7.6 Date: 9/3/2020)

• CP210x Windows Drivers with Serial Enumerator (Version: v6.7.6 Date: 9/3/2020)

Driver 10/29/2021 / Version 11.0.0.509

• CP2102 USB to UART Universal Bridge Driver (Windows)

What is Silicon Labs CP210x USB to UART?

The Silicon Labs CP210x USB to UART is a range of devices made for serial communication. The CP210x is a USB 2.0 full-speed function controller as well as a USB transceiver, oscillator with an EEPROM and works with the RS232 protocols. You can also write to it and change its ports.

Show the CP2102 driver install

You can see here how to install the CP2102 drivers. Install the drivers be this Linux or Windows and then use the software from there. You will first need to test the Ports on the bridge and you will need to see how to test the ports and then implement this in your system.

CP2102 USB to UART bridge controller driver?

Likewise the CP2102 USB to UART bridge controller will need a driver which you will need to download and install. Additionally these are the Windows drivers and well as the Linux drivers. Lastly see how to install and test the ports on the CP2102 UART bridge and implement it from there.

How to install CP210x driver?

Download and install the CP210x Windows driver as shown above. You will need to install it and then check in the Windows 10 Device Manager and see it it reflects correctly. If there is an error then right click and uninstall and then try to re-install the driver again.

Incoming Search Terms:

• cp2102 usb to uart bridge driver

Before you connect your Pololu CP2102 device to a computer running Microsoft Windows, you should install its drivers:

1. Download the CP2102 drivers for Windows (4MB zip).
2. IMPORTANT: You must extract the zip archive into a temporary directory. DO NOT attempt to double-click or run any of the files until you have extracted them.
3. Open the temporary directory and run the appropriate executable. If you have a 64-bit operating system, you should run pololu-cp2102-setup-x64.exe. If you have a 32-bit operating system, you should run pololu-cp2102-setup-x86.exe.
4. During the installation, Windows will ask you if you want to install the drivers. Click “Install” (Windows 10, 8, 7, and Vista) or “Continue Anyway” (Windows XP).
5. The installer should complete successfully.

Windows 10, Windows 8, Windows 7, and Windows Vista users: Your computer should now automatically install the necessary drivers when you connect a Pololu CP2102 device. No further action from you is required.

Windows XP users: You need to follow steps 6–10 for each new device you connect to your computer.

1. Connect the device to your computer’s USB port. Your computer will detect the new hardware and open the Found New Hardware Wizard.
2. When the Found New Hardware Wizard is displayed, select “No, not this time” and click “Next”.
3. On the second screen of the Found New Hardware Wizard, select “Install the software automatically” and click “Next”.
4. Windows XP will warn you again that the driver has not been tested by Microsoft and recommend that you stop the installation. Click “Continue Anyway”.
5. When you have finished the Found New Hardware Wizard, click “Finish”.

If you now go to your computer’s Device Manager and expand the “Ports (COM & LPT)” list, you should see “Pololu USB-to-Serial Adapter” as one of the COM ports.

Windows 8 device manager showing a Pololu CP2102 device.

Some software will not allow connection to higher COM port numbers. If you need to change the COM port number assigned to your USB adapter, you can do so using the Windows device manager. Bring up the properties dialog for the “Pololu USB-to-Serial Adapter” COM port and click the “Advanced…” button in the “Port Settings” tab. From this dialog you can change the COM port assigned to your device.

1. Overview

1. Downloads

1. Tech Docs

1. Community & Support

×

По вопросам приобретения товара

По техническим вопросам