Bootcamp audio drivers windows 10

Столкнулся с такой же проблемой.
На своём iMac 2011 после установки Windows 10 — нет звука.
После месяца танцев с бубном, прочитанных всех русскоязычных и англоязычных форумов, просмотра десятков youtube видео и переустановки раз двадцать Windows10, нашёл решение проблемы.
Для этого потребуется:
1. Флеш накопитель,
2. Два пустых DVD,
3. DVD привод,
4. SSD диск + рамка HDD to SSD,
5. Ключ Windows 10.
Отступление. Почему вообще заморочился насчёт установки Windows 10 — MacOS High Sierra больше не поддерживает Microsoft Office программы и Onedrive. И поэтому нужен Windows 10.

— Скачать образ Windows 7 и Windws 10.
— Записать Windows 7 и Windows 10 на DVD. Установки с флеш-накопителя не прокатят — звука не будет.
— Через встроенную MacOs утилиту bootcamp создаём флеш с драйверами windows.
— Меняем старый HDD на SSD (Устанавливал на встроенный HDD — система работает очень медленно).
— Через встроенную MacOs утилиту диск менеджер форматируем наш SSD в fat32.
— Отключаем все интернет-соединения – это важно. Вставляем диск с Windows 7 в дисковод и перезагружаем компьютер.
— С зажатой кнопкой “option” запускаем установку Windows 7 с дисковода (не спешите, начальная загрузка происходит довольно долго).
— Устанавливаем windows 7 попутно отформатировав диск в NTFS. Установка производится довольно медленно поэтому набираемся терпения и пьём чай.
— После загрузки на рабочий стол вставляем наш флеш-накопитель и находим драйвера cirrus logic. Устанавливаем. Перезагружаемся. И должен появиться звук.
— С флеш-накопителя запускаем boot camp установщик и ждём окончания установки всех драйверов. Перезагружаемся.
— Вставляем диск с Windows 10, запускаем установщик и выбираем установку с сохранением всех данных.
— Набираемся терпения, пьём уже не чай, и ждём окончания установки Windows 10.
— После установки Windows 10 опять находим драйвера cirrus logic, устанавливаем, перезагружаемся, и радуемся звуку.
— Запускаем установщик boot camp с флеш-накопителя, устанавливаем все драйвера, перезагружаемся и обновляем boot camp. После обновления boot camp можно будет выбрать загрузку Windows по умолчанию.
— У меня определились все драйвера, кроме bluetooth. На флеш-накопителе эти драйвера есть. Через диспетчер устройств вручную указываем путь к драйверам и всё должно определиться.
— Подключаем интернет, обновляем Windows до 22H2. Радуемся.
— В итоге получаем актуальную систему на своём Imac.

Напоследок расскажу что на моём компьютере MacOs high sierra установлена на внешнем жёстком диске, Windows 10 обязательно должен быть установлен на внутреннем жёстком диске. При установке windows на внешний жёсткий диск сторонними программами — звука не будет. При установке windows 10 без установки windows 7 — звука не будет. Использовал оригинальные Windows образы скачанные с Microsoft сайта. При установке Windows систем необходимо использовать проводную мышь. После установки SSD — система работает быстро и плавно. За неделю использования проблем не было замечено.
Надеюсь, что мой опыт кому-то поможет.

Источник

Table of Contents

Bootcamp Drivers Windows 10:

If you own Mac OS X, and you want to install new boot camp drivers on your Mac, then this article is for you. Specifically, we’ll discuss the steps required to download Bootcamp drivers for a Mac laptop or computer that does not have a USB port. Before starting, it’s best to know that older laptops that do not have USB ports may be damaged or infected with malware that prevents them from being able to use certain programs or file types. In such cases, it’s a good idea to obtain a USB port.

How to install Bootcamp drivers?

To install Bootcamp drivers on a Mac, you can follow the steps below. First, download the driver package from our website. After downloading it, open the Finder and click on the application folder in which you want to install the driver. Next, locate the folder where you want to install the driver. Once the installation is complete, click on the Apple icon in the bottom-right corner of the window. Then, double-click the downloaded file to install it.

Then, insert the USB flash drive and run Windows Support software that will load drivers for Apple hardware. Select the USB flash drive from the Windows Start menu. The USB flash drive will have a D or E drive letter. Click on the Bootcamp folder and run the Setup app. After installation, reboot and verify that the new device is working. If not, try reinstalling your Bootcamp drivers. After installing them, you can use your Apple hardware to use it.

Install the latest version of Bootcamp Drivers:

If the drivers are outdated, try running the Windows program that came with the computer. This is called Driver Detective. Go to /System/Library/VCames/list. From there, click the Driver Detective icon. It will display a list of all available drivers. Choose the working Windows 10 driver and click Upload. Then, restart your computer and your Apple hardware should now work. When you’re done, you can now use your Mac’s USB flash drive to use your Mac.

First, let’s begin by examining how to install drivers. To do this, follow the prompts, and follow the instructions. For example, if you’re searching for Bootcamp drivers, then at the “Support” menu, select “Downloads/drivers.” Next, under “Downloads/drivers,” go to the Bootcamp website and find the appropriate driver. Once you find the one you need, save it to your system. Then repeat the process as written above, but this time, select “Software/driver” and choose the software that was just available.

Install the drivers manually:

Now let’s examine what steps you need to take if you don’t have a USB port and need to install drivers manually. To do this, first, disconnect the laptop’s power adapter, and then plug the USB cable into a USB port on your Mac computer. Open the driver manager on your Mac by going to System/ Utilities and clicking on the “Bluetooth Devices.” Click “Check now” to ensure that your driver is updated.

Still, having difficulty?

If you are still having difficulty, then I recommend using the Windows program that helps you update your drivers. This program is Driver Detective. It’s located in /System/Library/VCames/list, then click on Driver Detective. Follow the prompts, and you will see all of your drivers. For Bootcamp, select “Working Windows 10”, then click “Upload“.

The only possible hitch with this method is that if you’re not an advanced user, then you may not know how to extract the Bootcamp files. Luckily, there are program “order tools” which will do this automatically for you. Open up the program, and follow the easy steps to extract the boot files. Once you’ve successfully extracted them, restart your Mac OS X machine. Your old bootup should be gone!

Online tutorials:

All of this is about using the online tutorial site known as Puckett. Download your Bootcamp Drivers Windows 10, and you’re ready to try out your new operating system. See how well that Bootcamp setup worked for you? Now, just fire up your favorite internet browser, and view the sites that would have been unavailable.

How to Download Bootcamp Drivers?

Fortunately, there are a couple of ways to download the latest Bootcamp drivers for your Mac. First, you can use the support disk included with your iMac, or you can go to Apple’s website and search for “Downloads/drivers.” After you locate the appropriate driver, you can download it and save it to your system. From there, you can follow the instructions for installing it in your operating system.

The first way is to download the Bootcamp drivers from Apple’s website. This includes everything from the hardware to the software. The process of downloading the drivers is very easy, and the software does not require advanced computer skills. The software is available for free at sites like Puckett.com. You can also download the latest version of the Bootcamp drivers from the Apple website. After that, you can install them on your computer.

If you have advanced knowledge, you can try downloading the drivers from Apple’s website. The process is simple enough, and it’s free! However, it can be a little tricky for beginners. For this reason, you should use an all-in-one driver utility, such as Driver Talent. It can download all Mac drivers, including Bootcamp. You can find the latest drivers in just a few clicks.

Источник

Hi everybody. I begin to apologise because I’m french and my english is not perfect. 🙂

So, you are, the apple community, my last chance.

First of all : I give you my set up, that will be usefull.

Config : Macbook pro late 2011

Upgrade with SSD 850 evo

So I have 1 HD and 1 SSD.

I recently instaled Windows 10 with Bootcamp on the Hard Disk. Everything works well, but I don’t have audio.

I had installed the latest Bootcamp (Drivers) on Windows 10. But at this point I had no audio.

I saw on «device manager» that the «Hight Definition audio codec» is installed, but badly. I can see a Yellow exclamation mark and an error in the property (Code 10).

Then, I tried to uninstall this Driver (directly in the device Manager), to install it better. But nothing looks work.

I had also tried to download directly the latest driver on the Realtek Website.

I have more information for you : If I plug a jack I have the same issue.

In the Mac partition : The latest OS Yosemite is installed

When I installed W10, it was on an empty partition, with a boutable USB drive.

I tried the latest Bootcamp and also 5.1.5626

I really hope that you’ll can help me.

Thank You

Источник

Introduction

Fixing sound drivers on Windows 10 Bootcamp can be a tricky process. It requires a good understanding of the operating system and the hardware components involved. Fortunately, there are a few steps you can take to troubleshoot and fix sound driver issues on Windows 10 Bootcamp. This guide will provide you with the necessary information to help you resolve any sound driver issues you may be experiencing. It will also provide you with tips on how to prevent sound driver issues from occurring in the future. With the right knowledge and tools, you can easily fix sound drivers on Windows 10 Bootcamp.

Sound driver issues in Windows 10 Bootcamp can be a frustrating experience. Fortunately, there are a few steps you can take to troubleshoot and fix the problem.

First, check to make sure the sound driver is installed correctly. To do this, open the Device Manager and look for the sound driver. If it is not present, you will need to install it. You can find the driver on the manufacturer’s website or on the Windows 10 Bootcamp installation disc.

Once the driver is installed, you should check to make sure it is enabled. To do this, right-click on the sound driver and select “Enable”. If the driver is already enabled, you can try disabling it and then re-enabling it.

If the driver is enabled and still not working, you can try uninstalling it and then reinstalling it. To do this, right-click on the sound driver and select “Uninstall”. Once the driver is uninstalled, you can reinstall it from the manufacturer’s website or the Windows 10 Bootcamp installation disc.

If the driver is still not working, you can try updating it. To do this, right-click on the sound driver and select “Update Driver”. You can then follow the on-screen instructions to update the driver.

Finally, if none of these steps have worked, you can try resetting the sound settings. To do this, open the Control Panel and select “Sound”. Then, click on the “Reset” button. This will reset all of the sound settings to their default values.

By following these steps, you should be able to troubleshoot and fix sound driver issues in Windows 10 Bootcamp. If you are still having issues, you may need to contact the manufacturer for further assistance.

Exploring the Benefits of Updating Sound Drivers in Windows 10 Bootcamp

Updating sound drivers in Windows 10 Bootcamp is an important step in ensuring that your computer is running at its best. Sound drivers are responsible for controlling the audio output of your computer, and if they are outdated or corrupted, you may experience issues with sound quality or even no sound at all. Updating sound drivers can help to improve the overall performance of your computer, as well as provide a better audio experience.

When updating sound drivers in Windows 10 Bootcamp, you will need to first identify the type of sound card you have installed in your computer. This can be done by opening the Device Manager, which can be found in the Control Panel. Once you have identified the sound card, you can then download the latest driver from the manufacturer’s website. It is important to make sure that you are downloading the correct driver for your specific sound card, as installing the wrong driver can cause further issues.

Once the driver has been downloaded, you can then install it by double-clicking on the file and following the on-screen instructions. After the installation is complete, you should restart your computer to ensure that the new driver is properly installed.

Updating sound drivers in Windows 10 Bootcamp can provide a number of benefits. For example, it can help to improve the overall performance of your computer, as well as provide a better audio experience. Additionally, it can help to reduce the risk of hardware conflicts, which can cause system instability. Finally, it can also help to ensure that your computer is running the latest version of the driver, which can help to reduce the risk of security vulnerabilities.

In conclusion, updating sound drivers in Windows 10 Bootcamp is an important step in ensuring that your computer is running at its best. By downloading and installing the latest driver from the manufacturer’s website, you can help to improve the overall performance of your computer, as well as provide a better audio experience. Additionally, it can help to reduce the risk of hardware conflicts and security vulnerabilities.

Tips for Optimizing Sound Drivers Performance in Windows 10 Bootcamp

1. Update Sound Drivers: It is important to keep your sound drivers up to date in order to ensure optimal performance. To do this, open the Device Manager, select the sound device, right-click and select “Update Driver”.

2. Disable Unnecessary Audio Enhancements: Windows 10 Bootcamp includes a number of audio enhancements that can cause performance issues. To disable these, open the Control Panel, select “Hardware and Sound”, select “Sound”, select the “Enhancements” tab and uncheck any unnecessary enhancements.

3. Adjust Audio Settings: To ensure optimal performance, it is important to adjust the audio settings in Windows 10 Bootcamp. To do this, open the Control Panel, select “Hardware and Sound”, select “Sound”, select the “Playback” tab and adjust the settings as needed.

4. Disable Unnecessary Audio Services: Windows 10 Bootcamp includes a number of audio services that can cause performance issues. To disable these, open the Run dialog box (Windows + R), type “services.msc” and press Enter. Then, right-click on any unnecessary audio services and select “Stop”.

5. Uninstall Unnecessary Audio Software: If you have any unnecessary audio software installed, it can cause performance issues. To uninstall these, open the Control Panel, select “Programs and Features”, select the software and click “Uninstall”.

By following these tips, you can ensure that your sound drivers are optimized for optimal performance in Windows 10 Bootcamp.

Understanding the Different Types of Sound Drivers for Windows 10 Bootcamp

Windows 10 Bootcamp is a powerful tool that allows users to run Windows on their Mac computers. To ensure that the Windows operating system runs smoothly, it is important to understand the different types of sound drivers available for Windows 10 Bootcamp.

The first type of sound driver is the High Definition Audio Driver. This driver is designed to provide high-quality audio output for Windows 10 Bootcamp. It is compatible with a wide range of audio devices, including speakers, headphones, and microphones. This driver is available for download from the Microsoft website.

The second type of sound driver is the Realtek High Definition Audio Driver. This driver is designed to provide improved audio performance for Windows 10 Bootcamp. It is compatible with a wide range of audio devices, including speakers, headphones, and microphones. This driver is available for download from the Realtek website.

The third type of sound driver is the Creative Sound Blaster Driver. This driver is designed to provide enhanced audio performance for Windows 10 Bootcamp. It is compatible with a wide range of audio devices, including speakers, headphones, and microphones. This driver is available for download from the Creative website.

Finally, the fourth type of sound driver is the VIA HD Audio Driver. This driver is designed to provide improved audio performance for Windows 10 Bootcamp. It is compatible with a wide range of audio devices, including speakers, headphones, and microphones. This driver is available for download from the VIA website.

By understanding the different types of sound drivers available for Windows 10 Bootcamp, users can ensure that their audio devices are working properly and that they are getting the best possible audio performance from their Windows operating system.

How to Install and Uninstall Sound Drivers in Windows 10 Bootcamp

Installing Sound Drivers in Windows 10 Bootcamp

Installing sound drivers in Windows 10 Bootcamp is a relatively straightforward process. Before beginning, make sure that you have the latest version of Bootcamp installed on your Mac.

1. Download the latest version of the Bootcamp drivers from the Apple website.

2. Once the download is complete, open the Bootcamp folder and double-click on the Setup file.

3. Follow the on-screen instructions to install the drivers.

4. Once the installation is complete, restart your Mac.

5. After the restart, open the Bootcamp folder again and double-click on the Setup file.

6. Select the “Install or Remove Windows Components” option.

7. Select the “Sound” option and click “Install”.

8. Follow the on-screen instructions to complete the installation.

Uninstalling Sound Drivers in Windows 10 Bootcamp

1. Open the Bootcamp folder and double-click on the Setup file.

2. Select the “Install or Remove Windows Components” option.

3. Select the “Sound” option and click “Remove”.

4. Follow the on-screen instructions to complete the uninstallation.

5. Once the uninstallation is complete, restart your Mac.

6. After the restart, open the Bootcamp folder again and double-click on the Setup file.

7. Select the “Install or Remove Windows Components” option.

8. Select the “Sound” option and click “Install”.

9. Follow the on-screen instructions to complete the installation.

By following these steps, you should be able to successfully install and uninstall sound drivers in Windows 10 Bootcamp.

Common Sound Drivers Problems and Solutions in Windows 10 Bootcamp

Windows 10 Bootcamp is a popular platform for running Windows on Mac computers. However, users may encounter sound driver issues when using this platform. This article will discuss some of the most common sound driver problems and their solutions.

The first issue is that the sound driver may not be installed correctly. To resolve this, users should open the Bootcamp Control Panel and select the “Update” option. This will install the latest version of the sound driver.

The second issue is that the sound driver may be outdated. To resolve this, users should open the Bootcamp Control Panel and select the “Update” option. This will install the latest version of the sound driver.

The third issue is that the sound driver may be incompatible with the version of Windows 10 installed on the computer. To resolve this, users should open the Bootcamp Control Panel and select the “Uninstall” option. This will remove the sound driver and allow users to install a compatible version.

The fourth issue is that the sound driver may be corrupted. To resolve this, users should open the Bootcamp Control Panel and select the “Repair” option. This will repair any corrupted files and restore the sound driver to its original state.

Finally, the fifth issue is that the sound driver may be disabled. To resolve this, users should open the Bootcamp Control Panel and select the “Enable” option. This will enable the sound driver and allow users to use it.

In conclusion, these are some of the most common sound driver problems and their solutions in Windows 10 Bootcamp. By following the steps outlined above, users should be able to resolve any sound driver issues they may encounter.

Q&A

1. How do I fix sound drivers on Windows 10 Bootcamp?

To fix sound drivers on Windows 10 Bootcamp, you can try the following steps:

1. Open Device Manager.
2. Expand the Sound, video and game controllers section.
3. Right-click on the audio device and select Update Driver.
4. Select Search automatically for updated driver software.
5. Follow the on-screen instructions to complete the update.
6. Restart your computer.

2. What should I do if my sound drivers are not working on Windows 10 Bootcamp?

If your sound drivers are not working on Windows 10 Bootcamp, you can try the following steps:

1. Open Device Manager.
2. Expand the Sound, video and game controllers section.
3. Right-click on the audio device and select Uninstall.
4. Restart your computer.
5. Open Device Manager again.
6. Select Scan for hardware changes.
7. Follow the on-screen instructions to complete the installation.

3. How do I update my sound drivers on Windows 10 Bootcamp?

To update your sound drivers on Windows 10 Bootcamp, you can try the following steps:

4. How do I reinstall my sound drivers on Windows 10 Bootcamp?

To reinstall your sound drivers on Windows 10 Bootcamp, you can try the following steps:

5. How do I troubleshoot sound drivers on Windows 10 Bootcamp?

To troubleshoot sound drivers on Windows 10 Bootcamp, you can try the following steps:

1. Open Device Manager.
2. Expand the Sound, video and game controllers section.
3. Right-click on the audio device and select Properties.
4. Select the Driver tab.
5. Select Roll Back Driver.
6. Follow the on-screen instructions to complete the rollback.

6. How do I reset sound drivers on Windows 10 Bootcamp?

To reset sound drivers on Windows 10 Bootcamp, you can try the following steps:

Troubleshoot sound problems on Windows with Boot Camp …
4 Proven Methods to Fix Bootcamp Windows 10 No Sound Issue …
No sound from windows 10 via bootcamp – Apple Community

Источник

I have installed Windows 10 on my Mid 2012 Macbook Pro. I already had a separate partition which was a leftover from Ubuntu in it, so I didn’t partitioned it using Bootcamp and directly formatted it in NTFS. I then used Bootcamp assistant which automatically detected the NTFS partition.
I made a bootable usb and installed Windows 10 using it. It does have latest drivers too. Everything is working in it after installing Bootcamp drivers except the sound. I just get a red cross on the Volume icon in system tray and when I click on it, Windows starts to troubleshoot and the result always points that the hardware change might not have detected and it’s been fixed now.

However it never gets fixed. In device manager, I get a yellow warning mark under High Definition audio controller and no other audio device. I have tried installing both Realtek and Cirrus drivers, but they doesn’t get installed saying that they are incompatible.

How can I get the audio to work in Windows 10?

Источник