Loading
- Etcher version: any on Windows (tried 1.4.4 portable, 1.4.4 x64, 1.4.3 portable, 1.4.3 x64, 1.3.1 portable)
- Windows 10 x64 fully updated
- DevTools not working
Nothing more to explain… this is what it looks like:
Dev tools (ctrl+shift+I) shows like this:
Tried running as administrator, running from different units… always the same result.
Any clue?
Re: Balena etcher hangs with white screen -windows7 64
Post
by Reddog1 »
I’m coming in on this thread late, but, I really don’t think that you should be installing on an external drive. It can be done, but it really isn’t a task for a linux newbie, and, especially on an older laptop, the performance will be sub-par, even if you do succeed.
Your ‘old’ laptop specs aren’t all that bad. It appears you have an intel I5 with intel graphics (probably 3000), and probably 4GB of ram (maybe 2GB). If your hd actually is the stock 500GB-7400rpm drive, that isn’t bad at all. I run one on a desktop PC and it’s fine.
I recommend, if the specs I quoted are what you have, that you drop the idea of using an external usb drive for linux, and that you install Mint alongside your Windows 7 on your internal HD.
Now, if you have limited space on the W7 drive, you can get by with as little as 50GB for Mint 21. I install Mint 21 in a virtual machine and I get by with a 22GB drive. With a lack of space, you will be limited as to what extra programs you can install and how much data you can store, but the standard install of Mint is around 10GB. That is a complete install, with everything you need to run a viable linux desktop operating system.
If you can afford to give up more space for Mint, do so. At least 256GB would be really nice. To do it right, first start W7 and then use the Windows disk utility to shrink the Windows drive and leave free space for the Mint install. I have some basic Windows 10 installs, plus a few Windows programs that I need, on 40GB drives, but your mileage can vary. Then boot your Mint usb, start the installer, and install alongside Windows 7. Grub should be installed on the first partition of the first hard disk (/dev/sda). Be sure that you install Mint the way W7 was installed (probably legacy, but possibly uefi). If you do that, grub will become the boot manager for both systems and you should be good to go. You can format an ext4 or FAT32 partition on the external drive and use it for data that takes up a lot of space, such as saved videos and music, but you need to keep in mind that the transfer of files will be relatively slow.
I suspect that your present install has grub on the 1st HD, which is the internal HD, /dev/sda, with your Mint system on the external, which could be either /dev/sdb or /dev/sdc, and likely the latter when installed, but recognized as sdb after the install. Kind of a mess to sort out, especially for a newbie.
All this is JMO, but I’ve been running linux since I first installed Debian—from floppies.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
- Pick a username
- Email Address
- Password
By clicking “Sign up for GitHub”, you agree to our terms of service and
privacy statement. We’ll occasionally send you account related emails.
Already on GitHub?
Sign in
to your account
BalenaEtcher Blank Screen: Have you ever encountered a blank screen while using BalenaEtcher? It’s frustrating, right? The good news is that you’re not alone! Many users have reported experiencing the same issue. But don’t worry; we’ve got your back. In this blog post, we will delve into the causes of the BalenaEtcher blank screen and provide some solutions to help you get back on track in no time. So sit tight, grab a cup of coffee and let’s dive in!
BalenaEtcher Blank Screen: What is it?
BalenaEtcher is a popular tool used to create bootable USB drives for operating systems and other software. However, sometimes users encounter an issue where they are faced with a blank screen while trying to use the program.
A BalenaEtcher blank screen is exactly what it sounds like: the application appears to be stuck on a white or black screen with no visible progress bar or other indication that anything is happening.
This problem can occur for several reasons, including issues with your hardware, outdated software versions, incorrect system settings, and more. It’s frustrating because you may not know what caused this problem in the first place.
If you’re struggling with the BalenaEtcher blank screen issue right now, don’t worry – we’ll explore some of the common causes of this error later in this post. But before we do that, let’s take a closer look at some possible solutions!
Causes of Blank Screen on Etchers
There are several reasons why you may encounter a blank screen on BalenaEtcher during the imaging process. One of the most common causes is a compatibility issue with your operating system, as Etcher may not be fully compatible with certain OS versions.
Another reason could be due to your computer’s hardware and drivers. Outdated or corrupted graphics card drivers can cause Etcher to display a blank screen and fail to load properly. Additionally, insufficient RAM or storage space on your device can also contribute to this issue.
Furthermore, it’s important to note that sometimes external factors such as antivirus software or firewalls may interfere with the program’s functioning leading to the blank screen error message.
Using an outdated version of Etcher might lead to incompatibilities with other applications installed in your PC which is another major contributor for having a blank screen error message while trying image an ISO file onto USB flash drive.
It’s crucial that you identify the root cause before attempting any troubleshooting solutions so you can address them accordingly and avoid encountering further problems down the line.
Solutions to Blank Screen on Etchers
If you’re experiencing a blank screen on BalenaEtcher, there are several solutions that may help resolve the issue. Firstly, try updating your graphics card driver as it may be outdated and causing issues with the software. You can also try running Etcher in compatibility mode or disabling hardware acceleration to see if this solves the problem.
Another potential solution is to check your antivirus software settings as it could be blocking Etcher from functioning properly. You can either disable your antivirus temporarily or add Etcher to its list of allowed applications.
Additionally, clearing out any temporary files or cache folders on your system can also help fix blank screen issues on BalenaEtcher. Running a disk cleanup tool or manually deleting these files should do the trick.
If none of these solutions work for you, uninstalling and reinstalling BalenaEtcher may be necessary. Make sure to download the latest version from their official website before attempting this step.
There are various solutions available for resolving blank screen problems on BalenaEtcher so don’t get discouraged if one method doesn’t work – keep trying until you find what works best for you!
Troubleshooting Guide for Blank Screen on Etchers
Experiencing a blank screen on BalenaEtcher can be frustrating, but there are solutions to help you get back to your project quickly. By understanding the causes and implementing the right solutions, you can troubleshoot any issues that may arise.
Remember to always check if your system meets the minimum system requirements for running BalenaEtcher and ensure that all necessary drivers are up-to-date. If none of these solutions work, then try contacting their technical support team for further assistance.
We hope this guide has been helpful in troubleshooting any blank screen problems with BalenaEtcher. Don’t let this issue cause delays or frustration in your projects – keep calm and use our tips to get back on track!