Avr studio for windows xp

Больше не поддерживается разработчиком

«Welcome to AVR Studio from Atmel Corporation. 

AVR Studio is a Development Tool for the entire AVR family of microcontrollers,

including tinyAVR, megaAVR, picoPower, and XMEGA AVR devices. The AVR Studio is

free of charge and may be freely copied and distributed in its original form.

AVR Studio enables the user to fully control execution of programs on the AVR

In-Circuit Emulator or on the included AVR Instruction Set Simulator. AVR

Studio supports source level execution of Assembly and C/C++ programs assembled

with the Atmel Corporation’s included AVR Assembler or tools from 3rd party

vendors.

AVR Studio runs under Microsoft Windows 98, Windows NT, Microsoft Windows 2000,

Windows XP and Windows Vista.

AVR Studio is continously developing. In order to get latest upgrades of AVR

Studio, please visit our web site

    www.atmel.com

and check out the AVR page.

[Licenses]

AVR Studio uses modified versions of the following LGPL licensed libraries:

-libelf http://directory.fsf.org/project/libelf/

-libdwarf http://reality.sgiweb.org/davea/dwarf.html

-pthreadgc http://sourceware.org/pthreads-win32/

-elfio

http://linux.softpedia.com/get/Programming/Assembler-Tools/ELFIO-623.shtml

You will find the LGPL licenses under [Your installation directory]/Atmel/Avr

Tools/licenses/

Our modified versions are available from 

http://distribute.atmel.no/tools/opensource/

Copyright © ATMEL Corporation. All rights reserved. 

AVR, tinyAVR, megaAVR, picoPower, XMEGA, and AVR Studio are trademarks of ATMEL

Corporation Windows is a trademark of Microsoft Corporation»

Здесь даны прямые ссылки для скачки AVR Studio и плагинов для него — не нужно заниматься такими глупостями, как регистрация, которая требуется для получения некоторых ссылок.

[AVR Studio 4.19]

http://www.atmel.com/dyn/resources/prod_documents/AvrStudio4Setup.exe —  AVR Studio 4.19 (build 730) 131 MB

http://atmel.com/dyn/resources/prod_documents/AVRStudio4.18SP1.exe —  AVR Studio 4.18 SP1 (build 692 ) (28 MB, updated 12/09)

http://atmel.com/dyn/resources/prod_documents/AVRStudio4.18SP2.exe —  AVR Studio 4.18 SP2 (b700) (28 MB, updated 2/10)

http://atmel.com/dyn/resources/prod_documents/AVRStudio4.18SP3.exe —  AVR Studio 4.18 SP3 (b716) (31 MB, updated 9/10)

http://atmel.com/dyn/resources/prod_documents/avr-toolchain-installer-3.0.0.240-win32.win32.x86.exe — AVR Toolchain Installer (87 MB, updated 9/10). Для использования вместе с AVR Studio 4.18 SP3

http://atmel.com/dyn/resources/prod_documents/Atmel_QTouch_Libraries_4.3.exe — QTouch Library 4.3 (21 MB, revision 4.3, updated 7/10)

http://atmel.com/dyn/resources/prod_documents/AvrLcd.msi — AVR LCD Visualizer (1 MB, revision 1.0, updated 02/04)

AVR LCD Visualizer позволяет создавать собственные дисплеи LCD с помощью редактора, отлаживать и наглядно просматривать их в среде разработки AVR Studio 4. Содержит Run-time обновление для ICE50 и симулятора. Поддерживает ATmega169. Минимальные требования: AVR Studio 4.07. Перед установкой удалите старые плагины LCD.

[AVR Studio 5.0.1163]

http://www.atmel.com/dyn/resources/prod_documents/as5installer-5.0.1163-full.exe — AVR Studio 5 installer (includes VSS and .NET) (602 MB, revision 5.0, updated 5/11).

То же самое на depositfiles [2].

[Ссылки]

1. AVR Studio archive site:atmel.com — архив всех версий AVR Studio на официальном сайте Atmel.
2. Различные версии AVR Studio.
3. Atmel Studio Downloads site:mikrocontroller.net. Тут можно найти прямые ссылки на закачку Atmel Studio.

For general purpose computers, programs written in one programming language can support different hardware configurations. But things are different for microcontrollers.  Each family of micro controllers have its own unique type of hardware architecture, instruction sets, register configuration and memories.

                So for each architecture of Micro controller family, there will be at least one compiler available, supporting that particular micro controller family or a couple of other families. Most of them support programming in assembly language while some of them support programs to be written in C language. In rare cases there are compilers that accept Java codes too. But I don’t recommend searching too much for a Java compiler, because most popular Integrated Development Environments (IDEs) don’t support it. AVR studio supports AVR series micro controllers. However the interesting fact is that, even AVR Studio doesn’t support all of the avr series micro controllers. I wrote it is “interesting”  because this IDE has been designed by the manufacturer (Atmel) itself. See release note of each version to know about supported micro controllers or the excluded ones.

                So if you are a beginner, I’ll suggest you to begin with AVR studio 4. Later, when you gain experience, start using AVR studio5. They are much different from each other. We will provide a comparative table of their features.

AVR studio 4 provides an integrated development environment(IDE), combined with two other supporting softwares, AVR Toolchain and WinAVR. AVR Toolchain installs the Library for AVR studio. AvrToolchain is a must to run AVR studio. If you install AVR Studio and AVR Toolchain, you’d be able to write program in assembly language. To write a program in C, you need to install WinAVR. If you are thinking to buy a development board from Atmel, it will be an even better decision because AVR Studio supports on board programming. You can write your programs in the AVR studio and you can instantly download & verify it too. Supported programmers are listed below:

• AVR Dragon
• AVR One
• AVR Simulator
• AVR Simulator 2
• ICE 200
• ICE 40
• ICE 50
• JTAG ICE
• JTAG ICE mkll

Programming Languages:                           Assembly Language, C

Software requirements:                               AVR Toolchain 3.0.0, WinAVR 20100110

For supported devices, hardware and software requirement details, see release notes @

AVR Toolchain 3.3.0 for 8 bit AVR

AVR Toolchain 3.3.0 for 32 bit AVR

Helpful Features:   I/O view pane, multiple document editing in tabs, really good reference manual. Hex file generation.

Total Space Consumption:

•  AVR Studio 4       307 MB
• AVR Tool Chain   194 MB
• Win AVR                 138 MB
•  Total             639 MB (As calculated by Windows uninstaller)

AVR Studio 5

AVR Studio 5 is much better than that of AVR studio 4. The experience is pretty amazing with AVR Studio 5. It has auto suggestion facility, like, if you start to type a function name, it will look in the library and the C file itself for matches and will list them in a drop down list, from which you can select them. This reduces name conflict. Suppose you want to define a macro or variables or want to introduce a new function, this feature helps very much. This feature is really helpful for a new programmer for whom the library is almost unknown. In addition, using new functions and macros has been made much easier. But to do this, you need the help of Visual studio shell. All the library, compiler and linker are provided with the AVR Studio 5 installer. For rest of the information have look at the release notes.

 Programming Languages:             Assembly Language, C

 Software requirements: Microsoft visual studio Isolated Shell 2010, AVR Jungo USB, Microsoft .NET framework 4 client profile.For supported programmers, supported devices, hardware and software requirement details See release notes @ AVR Studio 5 release notes

Helpful Features:    AVR studio 4 features + single compiler for 8 & 32 bit AVR controllers. In AVR Studio v5 there is no need of installing any additional tool chains. Another useful features of AVR studio 5 are, auto suggestion function, ready to use libraries, readily available examples, integrated online help,  integrated C Compiler,  Atmel AVR Software Framework, Standard APIs, Application Builder, Solution Explorer, In-system programming, JTAGICE3, I/O view etc and much more.

 Total Space Consumption:    

• AVR Studio 5                                          535 MB
• Visual Studio Isolated Shell             533 MB
•  .NET framework 4 client profile    182MB
• AVR Jungo USB                                     2 MB
• Total                                         1.22 GB (As calculated by windows uninstaller)

 For Programming Guide and programming help, see my upcoming posts.

Mark as Favourite

Installation Process

The step-by-step Installation Process for AVR Studio 4 Installation Guide is as follows: