Altera usb blaster драйвер windows 10

From Terasic Wiki

Jump to: navigation, search

To install the driver for your USB Blaster cable, follow the instruction for your particular operating system.

For Windows 10, do the following:

1. Plug the USB-Blaster into your PC.
2. Open the Device and Printers (Control Panel | Devices and Printers).
3. Under Unspecified, USB Blaster should be listed. Right mouse click on this and then select Properties.
4. Select the Hardware tab and select Properties.
5. A new window should pop up with the General tab already selected. Select Change Settings.
6. Again a new window should pop up with the General tab already selected. Select Update.
7. Select Browse my computer for driver software.
8. Find <Path to Quartus II installation>\quartus\drivers\

• (Note 1: Your altera file is located at the location you selected when you first installed quartus. The location listed in this document is the default location)
• (Note 2: Stop at the drivers folder, i.e., do NOT go deeper by opening a folder within the drivers folder)

1. Select OK. Make sure the proper path was selected then select Next.
2. If the Windows security window pops up Check the Always trust software from “Altera Corporation”box and select Install.

For Windows 7 and Windows 8, do the following:

1. Plug the USB-Blaster download cable into the PC. The following will appear on the screen: Device driver software was not successfully install. Select Click here for details.
2. Select Change settings…
3. Now cancel this (probably by selecting Cancel)
4. Open the Device Manager (Windows Key | Control Panel | Device Manage)
5. Under Other devices, USB Blaster should be listed. Right mouse click on this and then select Update Driver Software…
6. Select Browse my computer for driver software
7. Find <Path to Quartus II installation>\quartus\drivers\, then select Next; (Note: Stop at this folder, i.e., do NOT go deeper by opening a folder within the drivers folder)
8. Check the Always trust … box and then select Install

For Windows Vista, do the following:

1. Plug the USB-Blaster download cable into the PC. The Found New Hardware dialog box appears.
2. Select Locate and install driver software (recommended).
3. Select Don’t search online.
4. When you are prompted to Insert the disc that came with your USB-Blaster, select I don’t have the disc. Show me other options.
5. Select Browse my computer for driver software (advanced) when you see the Windows couldn’t find driver software for your device.
6. Click Browse… and browse to the <Path to Quartus II installation>\drivers\usb-blaster directory. Click OK.
7. Select the Include subfolders option and click Next.
8. If you are prompted Windows can’t verify the publisher of this driver software, select Install this driver software anyway in the Window Security dialog box.
9. The installation begins.
10. When The software for this device has been successfully installed appears, click Close.

For Windows XP, do the following:

1. Plug the USB-Blaster download cable into the PC. The Found New Hardware dialog box appears.
2. Select Locate and install driver software (recommended).
3. Select Don’t search online.
4. When you are prompted to Insert the disc that came with your USB-Blaster, select I don’t have the disc. Show me other options.
5. Select Browse my computer for driver software (advanced) when you see the Windows couldn’t find driver software for your device.
6. Click Browse… and browse to the <Path to Quartus II installation>\drivers\usb-blaster directory. Click OK.
7. Select the Include subfolders option and click Next.
8. If you are prompted Windows can’t verify the publisher of this driver software, select Install this driver software anyway in the Window Security dialog box.
9. The installation begins.

When The software for this device has been successfully installed appears, click Close. If you are running Windows in 64-bit mode, you MUST boot your computer as following both when installing the USB-Blaster driver AND when using Quartus to program your PLD.

• • During boot up of the computer, continuously press F8 (but do NOT hold it down).
  • Scroll down to “Disable Driver Signature Enforcement,” then hit Enter.

You must set up the driver before programming your PLD (CPLD or FPGA)

Driver

USB Blaster Drvier From Q16.1

Reference

• Reference by Dr. Eric M. Schwartz
• Back

Hi Everybody, 

 

I’m a newbie in Altera tools, and I encountered following problem 

when trying to install the Altera USB-Blaster periperal on a computer 

running Windows 10. 

 

I use the Quartus II 10.0sp1 Programmer. 

 

«Windows encontered a problem during the driver installation of your peripheral 

Windows find a driver for the peripheral, but has encontered an error while trying to install it. 

The hashing of this file is absent in the file catalog specified. 

The file is probably damaged or falsified 

If you know th chip manufacturer, you can visit its web site and consult the technical support section, or Download section to find a pilot for this peripheral.» 

  

Any help or idea is welcome 

Thanks in advance 

BR 

adie,

When attempting to download HP Smart, the first step is to ensure that your device meets the operating system requirements for the application. After confirming that you meet these requirements, then you should access the official download webpage on either your mobile device or computer. There, you will be able to download and install HP Smart. Once installed, open up the application and follow any further instructions.

If you are experiencing problems with your Pantum M6550NW printer, be sure to check the manufacturer’s website for troubleshooting and support options. Additionally, you should make sure that the printer is up-to-date with the latest firmware version. Troubleshooting steps such as restarting both devices (printer & PC/Laptop) or checking cables can help in many scenarios too.

If you are having issues with the Pantum M6550nw driver, please go to https://www.pantum.com/download and select your printer model from the drop-down menu to download and install the correct driver for your system.

Troubleshooting Microsoft Issues can be a time-consuming and complicated process. The goal of this guide is to provide a step-by-step approach to troubleshoot any issues with Microsoft products. We’ll start by providing general advice for diagnosing the problem and then review troubleshooting techniques specific to different types of Microsoft services, such as Windows, Office, or Azure services. With this comprehensive roadmap in hand, you should find yourself better equipped to identify and resolve even complex issues quickly.

Realtek can cause a range of issues that can be difficult to troubleshoot without the right expertise. This comprehensive guide covers everything you need to know for troubleshooting Realtek problems so that you can get back on track quickly and easily.

Driver packs are collections of drivers that can be used to update outdated or missing device drivers. If you are having trouble with driver pack, the best thing you can do is use a trusted and reliable driver updater tool to automatically download and install the correct version of the required drivers for your PC. This will ensure all your devices are running on their latest available software.

If you are looking to download the driver for your Canon Pixma MG2500 printer, you can do so from the official Canon website. Simply go to their online support page and search for the model number of your printer. Once selected, click on ‘Drivers & Downloads’ tab and choose your operating system to get access to a list of all available downloads related to that particular model.

If you’re having issues with your Epson L4150 Printer software, try updating the software by downloading and installing the latest version from Epson’s website. You can also refer to their troubleshooting guide for more help on resolving any issues.

KMS Pico is a powerful tool that can be used to activate Windows 10. It works by emulating the Microsoft KMS server on your computer, allowing you to bypass activation processes and activate your copy of Windows for free. To fix this user query, simply download the latest version of KMS Pico from a trusted source and follow the installation instructions when prompted.

See all queries