0x80072f8f 0x20000 media creation tool что делать windows 7

Ошибка 0x80072f8f 0x20000 появляется при двух распространенных ситуациях. Первая из них – при обновлении с Windows 7 до более свежей версии или просто при установке Windows 10. Вторая частая ситуация заключается в появлении ошибки при запуске Media Creation Tool. Причины появления, как и особенности проявления в каждой них, будут разными. Но есть и хорошая новость, она заключается в том, что есть довольно четкое представление об ошибке и эффективное решение к каждой вариации проблемы.

Почему появляется ошибка 0x80072f8f 0x20000?

Нам придется разделять две ситуации появления ошибки. Хотя они и имеют идентичный код, но во всем остальном сильно отличаются. Основная причина сбой с кодом 0x80072f8f 0x20000 при установке Windows 10 – отсутствие поддержки протоколов безопасности TLS. В Windows 7 Service Pack 1 по умолчанию включена поддержка только TLS 1.0. Сейчас же сервера Microsoft более не поддерживают столь устаревший стандарт. Требуется версия TLS 1.1 и TLS 1.2, которые по умолчанию отключены в старой операционной системе Windows 7. Их включение должно исправить проблему.

Если ошибка появляется при обновлении Windows, в основном через официальную утилиту Media Creation Tool, то проблема в некорректных файлах обновления. Видимо, система пыталась загрузить файлы для апдейта, но они оказались поврежденными. Нужно принудительно удалить их.

Как исправить ошибку 0x80072f8f 0x20000 при установке Windows 10?

Как мы и писали, нам нужно заставить Windows 7 работать с TLS 1.1 и TLS 1.2. Это вполне реально сделать, если подкорректировать реестр операционной системы. Можно запустить Windows в безопасном режиме и сделать необходимые изменения. Это можно сделать вручную, но есть и более быстрый способ – запустить файл. Нам нужен один из файлов Microsoft, вот ссылка. Скачиваем его, запускаем и через пару секунд исправления должны быть внесены. Можно перезагружать ПК и снова пытаться установить Windows 10.

Что нужно сделать вручную:

1. Нажимаем комбинацию Win + R, вводим regedit и нажимаем Enter.
2. Идем по пути HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client.
3. Изменяем значение параметра DisabledByDefault на 0 (если его нет, то просто создаем его).
4. Переходим в ветку HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client.
5. Тоже создаем или изменяем существующий параметр DisabledByDefault в значение 0.

Важно! Есть еще один интересный способ – запустить установку через ISO. Для этого нужно войти на сайт Microsoft с клиентом Windows и скачать его. Обязательно следует использовать для этого телефон. Затем передаем файл на ПК и запускаем его. У многих такое решение сработало.

Как исправить ошибку при обновлении через Media Creation Tool?

Для решения проблемы нужно зачистить файлы в одной из важных директорий, а также запустить обновление другим способом.

Пошаговая инструкция:

1. Переходим по пути C:\Windows\SoftwareDistribution\Download.
2. Удаляем все файлы, которые хранятся в этой папке.
3. Кликаем правой кнопкой мыши по Пуску и выбираем «Командная строка (администратор).
4. Вводим команду wuauclt.exe /updatenow.

Теперь вы знаете, что делать, если появляется ошибка 0x80072f8f 0x20000 при разных обстоятельствах. Включение поддержки TLS 1.1 и новее поможет успешно завершить установку операционной системы, а очистка файлов и обновление через консоль избавит от неполадки при апдейте Windows.

Будем рады увидеть ваши комментарии в отношении данной ошибки. Давайте вместе сделаем статью максимально полной.

Question

Issue: How to fix Media Creation Tool error code 0x80072F8F — 0x20000?

Hello. I tried to upgrade my system from Windows 7 to Windows 10 using the Media Creation Tool but I received the error code 0x80072F8F – 0x20000. What should I do? Any suggestions would be appreciated.

Solved Answer

Windows is an operating system used all over the world. It has a user-friendly interface, plenty of customization options, built-in troubleshooters, and more. Microsoft releases new versions, and users want to upgrade when the time comes. For this, they can use the application known as the Media Creation Tool.

Recently, some people tried to upgrade to newer versions of Windows, for example, from Windows 7 to Windows 10 or from Windows 10 to Windows 11, but they experienced issues. Users report receiving the 0x80072F8F – 0x20000 error code when trying to upgrade. Some suggest that the error is related to TLS security protocols.^[1] Some may have an older version – TLS 1.0, which is no longer suitable.

So the Media Creation Tool may simply be fixed by enabling newer versions – TLS 1.1 and TLS 1.2. If security protocols are not the culprits, Windows may fail to upgrade because of third-party security software interference, missing registry keys, malfunctioning update components, etc.

In this guide, you will find 6 steps that should help you fix Media Creation Tool error code 0x80072F8F – 0x20000. Keep in mind, manual troubleshooting can be a lengthy process so you can try using a maintenance tool like FortectMac Washing Machine X9. It can fix most system errors, BSODs,^[2] corrupted files, and registry^[3] issues automatically. Otherwise, follow the step-by-step instructions below.

Solution 1. Install missing update

An update KB3140245 allows you to enable TLS 1.2 protocol, as a Windows upgrade would not work otherwise. If your device is missing this update, it will result in an error when trying to upgrade. Note: this is for Windows 7 and 8 users only.

• Open your browser and navigate to Microsoft Update Catalog.
• Type KB3140245 in the search field and click Search or hit Enter.
• Here, select the correct version of the update that applies to you:
• Right-click on Start and pick System.
• Under Device specifications, check the System type section: it should either be 64-bit or 32 bit.
• Now, scroll down to Windows specifications and check the Version section.
• With all this information, pick the correct version for your device.
• Download and install the update by using on-screen instructions.
• Reboot your system.

Once installed, please follow up with the steps below and only then attempt to upgrade your OS again.

Solution 2. Enable TLS 1.1 and TLS 1.2

• Open the Notepad and paste the code mentioned below:

Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp] “DefaultSecureProtocols”=dword:00000a00 [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp] “DefaultSecureProtocols”=dword:00000a00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Client] “DisabledByDefault”=dword:00000000 “Enabled”=dword:00000001 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client] “DisabledByDefault”=dword:00000000 “Enabled”=dword:00000001

• After copying the code, click File from the top then click Save As
• Save the file with the .reg extension
• Once done, double-click on the file to apply the settings in the Registry
• Click Yes if asked for confirmation and restart Windows, then check if the issue gets resolved

Solution 3. Disable Third-Party Security Software

Some security programs might be conflicting with Microsoft servers and data packages, mistakenly perceiving these servers as insecure. Thus, it is known that removing AV software helped some users when trying to upgrade Windows.

• Right-click the antivirus icon and select Disable
• You can also double-click the antivirus icon and look for a Disable option there

Solution 4. Delete Files in the SoftwareDistribution Folder

• Go to C:\Windows\SoftwareDistribution\Download and delete all files in that folder

• Press Windows + X key on the keyboard
• Go to Command Prompt as admin
• Type this command wuauclt.exe /updatenow
• Press Enter

Solution 5. Edit the Registry

• Press the Windows + R keys simultaneously to open a run dialog box
• Type regedit in the box and press Enter
• Once the Registry is opened, navigate to the following path

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update

• Now right-click on the empty space and hover the over New
• Select DWORD (32-bit) from the listed option and name it as AllowOSUpgrade
• Double click on the file and change its value data to 1

• Once done, press OK to save the changes then check if the issue persists

Solution 6. Reset Windows Update Components

• Click Start Menu, and type Command Prompt
• Right-click on the command prompt and choose Run as Administrator
• Now insert the following commands to reset the Windows service

net stop bits

net stop wuauserv

net stop appidsvc

net stop cryptsvc

Solution 7. Restart Windows Services

• Press the Windows key + R keys to open the Run dialog box
• Type services.msc and press Enter
• Once the service page opened, please scroll down to Windows Update service and right-click on it to select Properties
• Now change the startup type from Manual to Automatic
• If the service is stopped, click on the Start button, then click Apply and press OK

• Now repeat the same process for the mentioned services below:

Background Intelligent Transfer Service

Server

Workstation

TCP/IP NetBIOS Helper

IKE and AuthIP IPsec Keying Modules

Solution 8. Reset Windows

If none of the suggestions helped you, we recommend resetting your system before upgrading it. It is easy to do and won’t affect your personal files. Nonetheless, we recommend you make backups of your data just in case. Also, please disconnect unnecessary external devices, such as USB sticks or printers, before proceeding.

• Right-click on Start and pick Settings.
• Go to Update & Security and pick Recovery.
• Find Reset this PC section and click Get Started.
• Select Keep my files > Cloud download.
• Proceed with the on-screen instructions (your PC may restart several times).

Repair your Errors automatically

ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow:

If you are facing the 0x80072f8f — 0x20000 error, I have shared a few quick ways to get rid of it below. So here we go:

How to Fix Error Code 0x80072f8f — 0x20000 on Windows

Windows makes it super easy to upgrade or reset Windows using its media creation tool. The media creation tool is easy to use and doesn’t face any issues often. However, some users have reported a media creation tool error code 0x80072f8f — 0x20000.

In several ways, one can get rid of the Windows update media creation tool error code 0x80072f8f — 0x20000. For instance, you can try modifying your registry settings, removing the software distribution folder, etc. However, these are 8 methods we are going to discuss in this article below.

For additional help, you can also refer to the following video:

1. 00: 45 Unblock Media Creation Tool
2. 01: 16 Delete Software Distribution Folder
3. 02: 25 Enable Enable TLS 1.1 and TLS 1.2

1. Verify Your PC’s Compatibility with the Windows Upgrade Requirements

Before you go ahead and upgrade your Windows, make sure your PC meets the requirements. You can download and launch the PC Health Check App to find this out. To get started, follow these steps:

Step 1. First, download the PC Health Check App.

Step 2. Double-click on the installer to install it, and then follow the onscreen steps.

Step 3. After installation, run the PC Health Check App and click the «Check Now» button. Then it will list the requirements marked as yellow that your PC doesn’t have.

Step 4. Finally, check if you can meet the requirements, fix the issues, and rerun Windows Media Installer.

2. Make Sure You Are in a Stable Internet Environment

You should also make sure that your internet is working fine. If your internet isn’t working, then Media Creation Tool won’t be able to download the necessary updates, and it will lead to Windows 10 upgrade error.

So do check if your internet is working fine. If not, then try restarting your router or troubleshooting your network.

3. Run Microsoft Media Creation Tool as an Administrator

If you haven’t run the Microsoft Creation tool as an admin yet, you should try it. There is a good chance that it lacks admin privileges. As a result, you are encountering an error.

So right-click on the Media Creation Tool, select Run as administrator, and then try to run the tool and see if it works.

4. Apply Modifications to the Windows Registry

You can also make changes to your Windows Registry to bypass the error. However, before you modify your registry settings, take a backup. So in case anything goes wrong, you can fix it quickly.

Once you are ready, follow the below steps:

Step 1. Press Windows Key + R to launch Run.

Step 2. Type regedit and press Enter.

Step 3. Go to the following path: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update

Step 4. Now right-click the blank area, go for New > DWORD (32-bit) Value, and name it AllowOSUpgrade.

Step 5. Double-click on the AllowOSUpgrade and change the Value data to 1.

Step 6. Next, click on and close Registry Editor.

Step 7. Finally, restart your PC, launch Media Creation Tool, and see if it works.

5. Perform a Clean Boot on Windows 11/10

Next, You can try performing a clean boot on Windows 10 or 11. A clean boot is a state where Windows starts with a minimum set of drivers and startup programs. This is quite similar to starting Windows in safe mode. But you get more control over which services and programs you want to run at the startup.

To get started, follow these steps:

Step 1. Go to Windows search.

Step 2. Type msconfig and launch System Configuration.

Step 3. Go to the services tab and check to Hide all Microsoft services.

Step 4. Then click the «Disable All» button.

Step 5. Go to the Startup tab and click «Open Task Manager».

Step 6. Then right-click on all the items individually and select Disable.

Step 7. Once done, close Task Manager and return to System Configuration Windows.

Step 8. Select Apple > OK to save the changes.

Step 9. Finally, restart your PC.

After the clean boot, try running the Media Creation tool and see if you get the Windows update media creation tool error code 0x80072f8f — 0x20000 error. If you don’t see the error, consider removing recently installed apps and running the media creation tool normally.

6. Enable TLS 1.1 and TLS 1.2 to Fix Error Code 0x80072f8f — 0x20000

One of the main reasons behind the Windows update media creation tool error code 0x80072f8f — 0x20000 is that your TLS is not enabled. If that’s the case with you, then do follow the below steps:

Step 1. First, make sure to back up Windows registry.

Step 2. Next, open Notepad and paste the below code:

Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp]»DefaultSecureProtocols»=dword:00000a00 [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp]»DefaultSecureProtocols»=dword:00000a00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client]»DisabledByDefault»=dword:00000000″Enabled»=dword:00000001[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client]»DisabledByDefault»=dword:00000000″Enabled»=dword:00000001

Step 3. Save the file with the .reg extension.

Step 4. Once done, double-click on the file to apply the settings in the Registry.

Step 5. After that, reboot your computer, try rerunning the Media creation tool, and see if it works.

7. Remove the Software Distribution Folder’s Content

Software distribution folder stores temporary files that might be required for installing Windows updates. However, sometimes Windows cannot access the Update files, which leads to a different error. Hence, cleaning up the software distribution folder for smoother Windows update installation is recommended. To do so, follow the below steps:

Step 1. Press Windows Key + R to launch Run.

Step 2. Type the following path and press Enter: C:\Windows\SoftwareDistribution\Download

Step 3. Now select all the files by pressing CTRL + A, right-click on the selected files, and click «Delete».

Step 4. Once done, press Windows + X to launch the quick menu and select Windows Terminal (Admin).

Step 5. In the Windows terminal, run the following command: wuauclt.exe /updatenow

Step 6. Once done, reboot your computer and check if the issue is resolved.

8. Reset Windows 11/10 to Fix Media Creation Tool Error

If none of the abovementioned methods works out for you, resetting your Windows would be the only solution. By resetting your PC, you will ensure no corrupted file or recently installed application conflicts with the Media Creation tool. However, before you reset your PC, please back up your important files to avoid data loss.

Once you are ready, follow these steps:

Step 1. Press Windows Key + I to launch Settings.

Step 2. Navigate to Windows Update > Advanced Options > Recovery.

Step 3. Click «Reset PC».

Step 4. Select Remove Everything and follow the onscreen steps.

Note: You can also perform a factory reset from BIOS on your computer if your computer cannot boot successfully.

Retrieve Lost Data After Fixing Error Code 0x80072f8f — 0x20000

After trying the above methods, the error may still exist. Or in some instances, your PC might get into an unrecoverable state, and resetting your PC would be the only solution.

After a factory reset, the computer will remove all applications, games or personal documents, pictures, music, or movies from the computer. As a result, some data will be overwritten, and the file system of the original lost file will be corrupted. But this doesn’t mean you can not recover wanted files after a factory reset. In such a case, you can use data recovery solutions like EaseUS Data Recovery Wizard to regain your data.

EaseUS Data Recovery Wizard is a professional software in data recovery and has helped millions of customers successfully and efficiently recover lost data, and easy to use. Here are all the steps:

Note: To guarantee a high data recovery chance, install EaseUS data recovery software on another disk instead of the original disk where you lost files. 

Step 1. Launch EaseUS Data Recovery Wizard on your Windows 11, Windows 10, Windows 8, or Windows 7 computer. Select the disk partition or storage location where you lost data and click «Scan».

Step 2. This recovery software will start scanning the disk to find all lost and deleted files. When the scan process completes, click «Filter» > «Type» to specify lost file types.

Step 3. Preview and restore lost Windows files. You can double-click to preview the scanned files. Then, select the target data and click the «Recover» button to save them to another safe spot in the PC or an external storage device.

Summary

So those were a few quick ways to fix the Media Creation Tool Error Code 0x80072f8f — 0x20000 error. You might want to reset your Windows if none of the methods works for you. In such a case, data loss is a serious concern. But you can always use EaseUS Data Recovery Wizard to recover your data quickly.

Error Code 0x80072f8f — 0x20000 FAQs

Now let’s look at some of the commonly asked questions around media creation tool errors:

1. How to fix Windows 10 update not working?

You can run the Windows update troubleshooter to fix the Windows update not working. Alternatively, you can use a media creation tool to download and install the latest Windows version.

2. How do I fix Windows error code 0x80072F8F 0x20000?

There are several ways to fix error code 0x80072F8F 0x20000. You can try running the Media creation tool as administrator, delete the software distribution folder, modify registry settings, etc.

3. Why I can’t run Media Creation Tool in Windows 7?

You can re-download the Media creation tool and run it as an administrator. As the media creation tool is compatible with Windows 7, you shouldn’t have any problem running it.

4. How to retrieve lost data after fixing the Media Creation Tool error?

One can use data recovery applications like EaseUS Data Recovery Wizard to recover lost data quickly and in easy steps, as it can recover data from a formatted drive.